Aggregation pheromone for the pepper weevil,Anthonomus eugenii cano (Coleoptera: Curculionidae): Identification and field activity

This study describes the identification of an aggregation pheromone for the pepper weevil,Anthonomus eugenii and field trials of a synthetic pheromone blend. Volatile collections and gas chromatography revealed the presence of six male-specific compounds. These compounds were identified using chromatographic and spectral techniques as: (Z)-2-(3,3-dimethylcyclohexylidene)ethanol, (E)-2-(3,3-dimethylcyclohexylidene)ethanol, (Z)-(3,3-dimethylcyclohexylidene)acetaldehyde, (E)-(3,3-dimethylcyclohexylidene)acetaldehyde, (E)-3,7-dimethyl-2,6-octadienoic acid (geranic acid), and (E)-3,7-dimethyl-2,6-octadien-1-ol (geraniol). The emission rates of these compounds from feeding males were determined to be about: 7.2, 4.8, 0.45, 0.30, 2.0, and 0.30µg/male/day, respectively. Sticky traps baited with a synthetic blend of these compounds captured more pepper weevils (both sexes) than did unbaited control traps or pheromone-baited boll weevil traps. Commercial and laboratory formulations of the synthetic pheromone were both attractive. However, the commercial formulation did not release geranic acid properly, and geranic acid is necessary for full activity. The pheromones of the pepper weevil and the boll weevil are compared. Improvements for increasing trap efficiency and possible uses for the pepper weevil pheromone are discussed. A convenient method for purifying geranic acid is also described.The mention of firm names or trade products does not imply endorsement or recommendation by the U.S. Department of Agriculture over other firms or similar products not mentioned. All programs and services of the U.S. Department of Agriculture are offered on a nondiscriminatory basis without regard to race, color, national origin, religion, sex, age, marital status or handicap.     

A Fourier-transform infrared study of CO2 and CO2/H2 interactions with caesium-doped copper catalysts

FTIR spectra are reported of CO₂ and CO₂/H₂ on a silica-supported caesium-doped copper catalyst. Adsorption of CO₂ on a “caesium”/silica surface resulted in the formation of CO₂ ⁻ and complexed CO species. Exposure of CO₂ to a caesium-doped reduced copper catalyst produced not only these species but also two forms of adsorbed carboxylate giving bands at 1550, 1510, 1365 and 1345 cm⁻¹. Reaction of carboxylate species with hydrogen at 388 K gave formate species on copper and caesium oxide in addition to methoxy groups associated with caesium oxide. Methoxy species were not detected on undoped copper catalyst suggesting that caesium may be a promoter for the methanol synthesis reaction. Methanol decomposition on a caesium-doped copper catalyst produced a small number of formate species on copper and caesium oxide. Methoxy groups on caesium oxide decomposed to CO and H₂, and subsequent reaction between CO and adsorbed oxygen resulted in carboxylate formation. Methoxy species located at interfacial sites appeared to exhibit unusual adsorption properties.     

Reduction of hexavalent chromium at a polypyrrole-coated aluminium electrode: Synergistic interactions

Adherent polypyrrole films were electropolymerized from a tosylic acid solution onto an aluminium substrate and used for the reduction of Cr(VI). The reduction of Cr(VI) to the trivalent state was found to proceed by pseudo-first-order kinetics with an activation energy barrier of 15.13 kJ mol^–1. This catalyst could be regenerated by reducing the composite at a sufficiently negative potential, in the absence of Cr(VI). However, it was found that the catalyst functioned also through a self-sustained regeneration mechanism. In this mechanism, Cr(VI) was reduced by PPy⁰ to generate PPy⁺, but the PPy⁺ was subsequently reduced to PPy⁰ by oxidation of the aluminium substrate, thus regeneration of the catalytic PPy⁰ surface giving rise to a synergistic action between the polypyrrole and the aluminium substrate.     

Viscoelastic properties and morphology of sulfonated poly(styrene-b-ethylene/butylene-b-styrene) block copolymers (sBCP), and sBCP/[silicate] nanostructured materials

Self-assembled organic/inorganic hybrid materials were created via domain targeted sol-gel reactions of tetraethylorthosilicate in solution with sulfonated poly(styrene-b-[ethylene-co-butylene]-b-styrene) (sSEBS) copolymers. Dynamic mechanical analyses (DMA) of these hybrid materials suggest that the silicate component preferentially incorporates within the sulfonated polystyrene (PS) domains. An irreversible order-order transition (OOT) for unmodified SEBS, sSEBS, and the organic/inorganic hybrids was identified using DMA in shear mode. The OOT temperature increases with sulfonation as well as by adding a silicate phase by the sol-gel process. The DMA results imply a morphological shift with sulfonation, and reflect modified interactions within and between phases. Atomic force microscopy (AFM) indicated a shift from hexagonally packed cylinders in unmodified SEBS to a lamellar morphology in the sulfonated materials, but silicate incorporation did not affect the morphology or domain dimensions. The latter result is evidence for sol-gel polymerization templating in a self-assembly process. The phase-separated morphology is stable up to the degradation temperature of the polymer and thermogravimetric analysis revealed that the degradation temperature is unaffected by silicate incorporation. Small angle X-ray scattering data are in harmony with the structures revealed by AFM in terms of degree of order and scale of features. These results are largely rationalized in terms of chain mobility restrictions due to hydrogen-bonding interactions between different sulfonated PS blocks, an increase in the PS-ethylene/butylene block mixing parameter, increased interfacial surface tension and chain restrictions posed by inserted silicate nanostructures in the case of the hybrid materials.     

Contribution of trace metals from atmospheric deposition to stormwater runoff in a small impervious urban catchment

The contribution of atmospheric deposition to emissions of trace metals in stormwater runoff was investigated by quantifying wet and dry deposition fluxes and stormwater discharges within a small, highly impervious urban catchment in Los Angeles. At the beginning of the dry season in spring 2003, dry deposition measurements of chromium, copper, lead, nickel, and zinc were made monthly for 1 year. Stormwater runoff and wet deposition samples also were collected, and loading estimates of total annual deposition (wet+dry) were compared with annual stormwater loads. Wet deposition contributed 1-10% of the total deposition inside the catchment, indicating the dominance of dry deposition in semi-arid regions such as Los Angeles. Based on the ratio of total deposition to stormwater, atmospheric deposition potentially accounted for as much as 57-100% of the total trace metal loads in stormwater within the study area. Despite potential bias attributable to processes that were not quantified in this study (e.g., resuspension out of the catchment or sequestration within the catchment), these results demonstrate atmospheric deposition represents an important source of trace metals in stormwater to waterbodies near urban centers.     

基于分治策略的加法器测试向量生成技术

为应对数据通道测试中向量生成计算复杂度的日益增长,针对加法器进行研究,提出了一种基于分治策略的加法器测试向量生成技术。首先将被测加法器电路分解为并发模块和顺序模块,分别生成对应这些模块故障全覆盖的测试向量子集,再将他们的输入信号映射为被测加法器电路的基本输入,经去除冗余向量后得到完整的测试向量集。给出的实验结果表明了该技术能有效地降低加法器测试向量生成的计算量,特别对于大规模加法器电路的测试生成,其效果更佳。     

Model forecasts of atrazine in Lake Michigan in response to various sensitivity and potential management scenarios

For more than forty years, the herbicide atrazine has been used on corn crops in the Lake Michigan basin to control weeds. It is usually applied to farm fields in the spring before or after the corn crop emerges. A version of the WASP4 mass balance model, LM2-Atrazine, was used to assess the impact of the historical and future usage of this chemical on lake water concentrations. Long-term model forecasts were performed under various sensitivity and potential management scenarios. The model was calibrated to available lake data and results indicate that atrazine, under average conditions, is decaying very slowly in the lake (0.009/year). This kinetic decay translates into a half-life estimate of 77 years. If the average condition scenario were assumed to remain constant into the future and reflective of conditions in January 1, 2005, it is expected that the lake (excluding Green Bay) would eventually reach a volume-weighted average atrazine concentration of approximately 67 ng/L in the year 2157 (current model prediction is 48 ng/L for year 2011). These forecasted lake-wide concentrations are below known water quality criteria for the protection of aquatic ecosystems.     

系统级封装(SiP)组装技术与锡膏特性(续)

4 结果和讨论 4.1 焊盘间的桥接 结果比较表明,使用不同的治具配置有明显的区别.使用平台治具作为板支撑的激光切割钢网在80 μm间隙的情况下未发现桥接.使用真空支撑时,激光切割钢网在50 μm间隙的情况下也未发现桥接.这说明使用真空支撑在印刷时的钢网和电路板间间隙更小,支撑性能更好.图5显示了其在125 μm×15...     

Teaching evidence-based interventions: Perceptions of influences on use in professional practice in school psychology.

This study examined perceptions of school psychologists regarding their use of evidence-based interventions in school settings after completing a graduate course in school-based psychosocial interventions. Ninety-four individuals who completed the course during the 10 years prior to the study were asked to complete a survey that focused on personal and organizational factors affecting the implementation of evidence-based interventions through assessment of (a) the extent of their use of interventions in professional school psychology practice, (b) perceptions of facilitators to implementation, and (c) perceptions of barriers to implementation. Fifty-four responded (a 57% response rate); analyses were conducted on the responses of 34 individuals who indicated that they were currently school psychologists working in schools. Results indicated that school psychologists’ personal beliefs about the interventions influenced their decisions to implement them. Several evidence-based interventions were less likely to be used in urban practice settings. Training in evidence-based interventions should address the personal and contextual issues that are related to implementation, as well as the procedures of the interventions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Surface normal interpolation for five axis CNC milling

This paper presents an algorithm for five-axis CNC interpolation. The algorithm generates cutter location points by interpolating the surface normals along a desired path. The surface normals are represented by line coordinates which tie a orientation vector with a specific point in space. The algorithm uses line displacements to generate an approximation of the surface normals along a path. The main advantage of this method is that it relates the angular velocity of the tool to the feed rate requirement of the interpolation. An example is shown of the interpolation technique on a Bezier surface.