Maximizing yellow pigment production in fed-batch culture of Monascus sp

Yellow pigment production in exponential fed-batch cultivation of Monascus sp. was studied. Due to the difficulty of measuring the optical density for accurate determination of the cell concentration, a capacitance probe was employed on-line. The feed rate needed to keep the specific growth rate, mu, constant in fed-batch culture was determined on the basis of the cell concentration measured by the capacitance probe. Control of mu was improved by using updated information on the cell concentration compared with the simple feed-forward determination method using the initial cell concentration only. The highest specific pigment production rate was achieved with a mu of 0.02 h(-1) in the feeding phase. However, among several fermentation examined, the largest pigment production in the final step was obtained at a mu of 0.01 h(-1); in each case the same amount of substrates was used. An investigation of the optimal initial glucose concentration revealed that pigment production was maximum when the initial glucose concentration in the batch mode was 10 g/l and mu was 0.01 h(-1) in the fed-batch mode. It was also found that the pellet weight in the fermentation could be accurately estimated by image analysis. The ratio of the mycelium weight to the total cell weight estimated from information on the total cell weight and the estimated pellet weight was found to be more than 80%. However, no clear quantitative relationship could be discerned between the specific pigment production rate, rho, and the ratio of mycelium in the cell population.     

High‐performance bio‐based thermosetting resins composed of dehydrated castor oil and bismaleimide

The reaction of dehydrated castor oil (DCO) and 1,1′‐(methylenedi‐4,1‐phenylene)bismaleimide (BMI) in 1,3‐dimethyl‐2‐imidazolidinone (DMI) at 130°C for 6 h and subsequent precipitation gave DCO/BMI prepolymer, which was cured at 200°C for 2 h gave DCO/BMI cured product. The FE‐SEM analysis revealed that the cured products with C?C ratio 2/1 and 1/1 are homogeneous, whereas phase separation occurs for the 1/2 product. The glass transition temperature, 5% weight loss temperature, and tensile modulus of the cured DCO/BMI increased with increasing BMI content. Regarding the tensile strength, the cured DCO/BMI 1/1 product showed the highest value. To evaluate the reaction of DCO and BMI, the model reaction products of DCO and N‐phenylmaleimide (PMI) in DMI were analyzed by ¹H NMR spectroscopy. The ¹H NMR data of DCO revealed that DCO has about 4.8 CH?CH bonds per triglyceride and that the ratio of conjugated and nonconjugated diene moieties is about 41/59. The NMR data of the reaction products of DCO/PMI with the C?C ratio 2/1 and 1/1 at 200°C for 24 h revealed that both Diels–Alder and ene reactions occurs in addition to radical polymerization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Measurement of lifetimes of thin carbon stripper foils produced by ion-beam sputtering

Thin carbon stripper foils used in high-intensity proton accelerators and heavy-ion accelerators must have long lifetimes. Thin carbon foils were fabricated by ion-beam sputtering using reactive and inert gas ions. The lifetime of the foils was measured using a KEK 650-keV high-intensity DC H⁻ (negative hydrogen ion) beam; changes in the foil thickness and surface deformations during irradiation were investigated. The lifetime of a typical stripper foil fabricated by heavy-ion-beam (Ar and Kr) sputtering was 60-70 times longer than that of the best commercially available foils. This paper reports a fabrication method for carbon stripper foils, along with an investigation of their lifetimes and changes in foil thickness during beam irradiation.     

Histological and biochemical analysis of the fibrous tissue induced by implantation of synthetic ligament (Dacron): an experimental study in a rat model

We conducted a comparative study to evaluate the quality and true nature of the fibrous tissue formed around synthetic grafts when used in ligament replacement. In one group of Lewis rats, a patellar ligament was replaced with a Dacron prosthesis; the comparison group received a tail tendon isograft. Two-, 4-, 8-, 12-, and 24-week comparisons showed histological and biochemical changes in the Dacron group alone that were consistent with foreign-body reaction. Specifically, the Dacron group showed infiltration by large numbers of macrophages and foreign-body, multinucleated giant cells. In addition, the capsule of fibrous tissue that developed around the Dacron ligaments was characterized by lower collagen solubility, a higher content of noncollagenous protein, and a higher proportion of type III collagen than that comprising the isografted tendons. The results of this study call into question the suitability of synthetics for ligament replacement.     

Losses in a multifilamentary superconducting wire caused by a simultaneous sweep of current and magnetic field

A theoretical discussion is presented on the energy loss in a multi-filamentary superconducting wire when an applied transport current and an external transverse magnetic field are varied simultaneously with a repeating pulsive wave form. In the present calculation, the effects of the ‘uniforming time constant’ which has been introduced by the authors as a characteristic time constant for the change in the transport-current distribution inside the wire is taken into account, together with the field dependence of the critical current density of superconducting filaments.Thus the present analytic expression for the energy loss of multi-filamentary wire is available to the whole range of the external magnetic field. It is shown that the contribution of the dynamic resistance loss to the total loss is strongly dependent on the position of the wire inside a coil.     

A novel biomass-ionic liquid platform for the utilization of native chitin

A room temperature ionic liquid (RTIL), that is, 1-butyl-3-methylimidazolium acetate (BminAc), is proposed to be a new good solvent for native chitins with different origins and molecular weights. A water and a methanol coagulant were used to regenerate the dissolved chitins and chitin materials with a variety of structures were prepared. Wide-angle X-ray diffraction (WAXD), Fourier transform IR (FTIR), thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM) were used to visualize the modifications of the native structures of chitin during the dissolution and the regeneration processes, as well as the morphological features and properties of the reconstituted chitin materials.