Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

Electrical and structural properties of ortho-chloranil doped zinc phthalocyanine films

Electrical conductivity of evaporated zinc phthalocyanine (ZnPc) films, doped with orthochloranil (o-CA) molecules, is investigated. Benzoico-CA solution is introduced in the film and benzene is removed by vapourization afterwards. The film conductivity at first increased and then decreased with incremental doping. The maximum conductivity of the sample appeared at doping level × (=o-CA/ZnPc) 0.2 and is about 10³ times as large as that of the as-evaporated one. About a ten-fold further increase in the conductivity is obtained by the heat-treatment of 150 °C for 12 h. The conductivity change by doping is explained by taking into account thato-CA molecules behave not only as acceptors in the film but destructively for the film structure. The phase change of ZnPc by benzoic solution is also discussed.     

The psychological development of orphanage-reared infants: interventions with outcomes (Tehran)

This paper describes five successive interventions in the rearing of infants at an orphanage in Tehran, with their outcomes. The outcomes were assessed longitudinally. The first of the successive groups, here called "waves", numbered 15. These Ss constitute the controls. The only intervention consisted of examining the infants every other week during the first year and every fourth week thereafter with the ordinal, sensorimotor scales of Uzgiris and Hunt. The audio-visual intervention intended for the second wave of 10 infants was tape-recorded mother talk and music under the control of the infants and mobiles that the infants could activate. This plan was never adequately implemented because of inadequate supervision. The third wave of 10 infants got extra untutored human care. The fourth wave of 20 infants got the kind of audio-visual intervention originally intended for the second wave plus access to responsive inanimate materials. For the fifth wave, numbering 11, the infant-caretaker ratio was reduced to two or three to one and the caretakers were taught the Badger program supplemented with procedures to foster vocal imitation and semantic mastery of body parts, clothing, toys, and other objects and events regularly encountered. The results show that each successive wave, excepting the second, achieved the top steps of nearly all seven of the ordinal scales at mean ages younger than the preceding wave, and the fifth wave surpassed even home-reared American children from predominantly professional families in achieving the top steps on five of the seven scales. The findings show that infants need not advance along all branches simultaneously and that the kinds of experience encountered determine the branch along which advancement occurs. A number of theoretical implications are examined. Especially important is the idea that a dependable educational psychology for infancy and early childhood calls for much more knowledge than we now have of the kinds of experience that advance development along each of the various branches.     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

A 1/8-scale model was constructed of a reinforced concrete containment vessel (RCCV) used in the latest advanced boiling water reactors (ABWR). Shaking table tests were conducted on it with input motions corresponding to or exceeding a design earthquake assumed for a real Nuclear Power Plant.The objectives of the tests were to verify the structural integrity and the leak-proof functional soundness of the RCCV subjected to design earthquakes, and to determine the ultimate strength and seismic margin by an excitation that led to the model's collapse. The model, the test sequence and the pressure and leak test results were addressed in Part 1. The shaking table test method, the input motions and the test results, including the transition of the model's stiffness, natural frequencies and damping factors and the effects of vertical input motions and internal pressure on the model's characteristics and behavior, the load–deformation, the ultimate strength, the failure mode of the reinforced concrete portion and the liner plate are described here. The seismic safety margin that was evaluated by the energy input during the failure test to a design basis earthquake will be described in Part 3. The analytical results of simulation using the multi-lumped mass model will be described in Part 4.     

Preparation of β-Fesi2 thin film by metal organic chemical vapor deposition using iron-carbonyl and mono-silane

β-FeSi₂ films were deposited at 750 °C by a supplying Fe(CO)₅ and SiH₄ simultaneously during metal organic chemical vapor deposition (CVD). Films could be deposited using this precursors system, even though film deposition was not ascertained by the single supply of Fe(CO)₅. Fe(CO)₅ was probably decomposed in gas phases before it reached to substrate surface. It was suggested that a kind of intermediate reactant which was more stable than Fe(CO)₅ created by the simultaneous supply of Fe(CO)₅ and SiH₄ makes Fe-Si films. Epitaxial β-FeSi₂ films were obtained on Si(111) substrates, and neither carbide nor oxide phases were detected on XRD patterns.     

Characterization by Stm and Electrical Conductivity of Single-Walled Carbon Nanotubes

Abstract

Single-walled carbon nanotubes (SWCNT) prepared by a DC-Arc-Discharge and purified by a hydrothermal treatment followed by several steps of procedures including heating, burning, extracting and acid-washing are investigated by a conventional STM technique morphologically and spectroscopically. The electical resistivities of compacted pellets (mats) of SWCNT are measured as a function of temperature in the range from the room-temperature to 1.5K. The behaviors seems to be essentially originated in the metallic nature of individual SWCNT.     

Towards the improvement of thermal efficiency in lignite‐fired power generation: Concerning the utilization of Polish lignite deposits in state‐of‐the‐art IGCC technology

Integrated coal Gasification Combined Cycle (IGCC) is the most advanced technology for coal‐fired power generation. The two‐stage entrained flow gasification process allows for the use of a wide range of coal, as long as the gasification temperature is above the ash melting point of a used fuel. In this gasification technology, lignite, which often has a low ash melting point, can be preferably utilized. However, ash fluidity is also another importance, because the behaviour of molten slag can diminish a stable ash discharge from a gasifier. As the eligibility of coal ash properties is a considerable factor, water physically and chemically kept in lignite (30 – 60% in mass) attributes to deteriorating gasification efficiency, because it causes significant heat loss and increasing oxygen consumption. Developing a thermal evaporative lignite drying method will be a necessary attempt to apply lignite to the coal gasification process. For those preceded objectives, coal and ash properties and drying characteristics of several grades of Polish lignite, extracted from Belchatow and Turow deposits, have been experimentally investigated in a preliminary study evaluating the applicability and consideration for its utilization in state‐of‐the‐art clean coal technology, IGCC. This paper particularly discusses the eligibility of Polish lignite from the perspective of the fusibility and fluidity of ash melts and the fundamental drying kinetics of lignite in superheated steam in the light of water removal. The viscosity of ash melts is measured at high temperature up to 1700 °C. In the drying tests, the significant influence of structural issues, because of the provenance and origin of lignite on the drying characteristics, was found by applying the method of sensitivity analysis of physical propensity. This paper concludes that the investigated Polish lignite has characteristics favourable for utilization in IGCC technology, once the precautions related to its high moisture have been carefully addressed. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of annealing on photovoltaic properties and microstructure of conventional and inverted organic solar cells using active bilayer based on liquid‐crystal semiconducting polymer and fullerene

Conventional and inverted organic solar cells of poly[9,9‐dioctyl‐fluorene‐co‐bithiophene] (F8T2) as liquid‐crystal semiconducting polymer and fullerene as electron acceptor were fabricated and characterized. An effect of thermal treatment of the films on annealing condition near glass transition was investigated for tuning optimization and improving the photovoltaic and optical properties. Annealing treatment below the glass transition improved the photovoltaic performance and carrier diffusion in crystal growth of active layer. The X‐ray diffraction patterns indicate a crystalline structure with molecular order of F8T2 in crystal index, 100 as a layer distance between sheets of F8T2 chains. The photovoltaic properties were based on molecular interactions with molecular ordering in active layer at crystal state. As the photovoltaic mechanisms, the F8T2 thin film as p‐type semiconducting polymer worked for electron‐donor layer to support light‐induced generation, carrier diffusion and charge transfer near interface in active layer. Copyright © 2014 John Wiley & Sons, Ltd.