Recent Progress in Communication Theory in Japan

This paper reviews recent progress in communication theory in Japan, mainly in the past three years. The topics to be discussed include 1) waveform transmission in band-limited channels and active transmission lines, 2) source-coding problems such as optimal quantizing characteristics, delta modulation, and linear transformation, 3) transmission codes, where mainly multilevel codes have been discussed, 4) new information transmission and modulation schemes, and 5) theories of traffic and switchingsystem design.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Microstructure and press formability of a cross-rolled magnesium alloy sheet

Cross-rolling, in which the roll axis is tilted by 7.5° towards the TD-direction, was carried out on a commercial magnesium alloy. The (0002) texture intensity of the cross-rolled specimen was lower than that of the unidirectionally rolled specimen, and the (0002) texture of the cross-rolled specimen was inclined about 10° towards the TD-direction. Also, the grain size of the cross-rolled specimen was smaller than that of the unidirectionally rolled specimen. As a result of the Erichsen tests at 433-493 K, the press formability of the cross-rolled specimen was higher than that of the unidirectionally rolled specimen. The high formability of the cross-rolled specimen is attributed to both the modification of (0002) texture and the enhancement of grain refinement by the cross-rolling.     

Photoluminescence enhancement by isolating β-FeSi2 layers from defective layers

We have investigated an optimal annealing process in order to enhance 1.55 μm light emission from semiconducting β-FeSi₂ and found that two steps annealing at 600 °C and 800 °C is effective to its enhancement. Rutherford backscattering spectroscopy and SEM observations revealed that pronounced surface segregation of Fe atoms during annealing at 600 °C caused surface precipitate of β-FeSi₂. The enhancement of light emission is attributed spatial isolation of the surface β-FeSi₂ (light emitting layer) from damaged and defective layers with nonradiative recombination centers.     

Submicron dry-etching behavior of β-FeSi2 thin films towards fabrication of photonic crystals

We have investigated dry-etching properties of polycrystalline β-FeSi₂ films formed by ion-beam sputter-deposition (IBSD) and the films epitaxially grown on Si by metal organic chemical vapor deposition (MOCVD) in order to realize fabrication of photonic crystals with several hundreds nanometers in dimension. Using reactive ion etching with magnetic neutral loop discharge (NLD) plasma, we succeeded in realizing a comparatively higher etching rate than that obtained by inductively coupled plasma (ICP). Both reactive ion etching and impact ion etching modes may contribute to etching of β-FeSi₂. We have fabricated a two-dimensional photonic crystal of β-FeSi₂ on Si substrates and confirmed its predicted photonic properties in a reflectance spectrum of polarized light.     

BAAQ: an infrastructure for application integration and knowledge discovery in bioinformatics.

The emerging grid computing technologies enable bioinformatics scientists to conduct their researches in a virtual laboratory, in which they share public databases, computational tools as well as their analysis workflows. However, the development of grid applications is still a nightmare for general bioinformatics scientists, due to the lack of grid programming environments, standards and high-level services. Here, we present a system, which we named Bioinformatics: Ask Any Questions (BAAQ), to automate this development procedure as much as possible. BAAQ allows scientists to store and manage remote biological data and programs, to build analysis workflows that integrate these resources seamlessly, and to discover knowledge from available resources. This paper addresses two issues in building grid applications in bioinformatics: how to smoothly compose an analysis workflow using heterogeneous resources and how to efficiently discover and re-use available resources in the grid community. Correspondingly an intelligent grid programming environment and an active solution recommendation service are proposed. Finally, we present a case study applying BAAQ to a bioinformatics problem.     

Simulated crepitus and its reality-based specification using wearable patient dummy

Physical therapists are trained in manual examination techniques to test the impaired motor functions of patients. In this study, we have introduced a wearable robotic dummy joint to simulate disordered joint resistances or behaviors to support physical therapists in learning such techniques. We developed a discontinuous joint friction model based on a stick-slip phenomenon to simulate knee joint resistances caused by crepitus, a typical symptom accompanied by osteoarthritis. Practicing therapists participated in a reality-based evaluation test and specified acceptable parameter sets to adjust the simulated crepitus for the exoskeletal patient robot. The simulated crepitus and wearable dummy joint are expected to support the training of physical therapists.     

Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel

A nanoindentation hardness testing system, including an atomic-force microscope (AFM)-based nanoindentation tester and a calibration method using electrolytically polished single-crystal metals as references, was proposed. This was applied to a study of the mechanical properties of fine-grained ferritic steel (grain size of 1.2 μm) and coarse-grained ferritic steel (30 μm). An empirical function giving the macroscopic hardness for all four reference metals from the nanoindentation force curves was established. The converted Vickers hardness (HV*) of the coarse-grained steel is almost independent of the indent size. The fine-grained steel shows only HV* 130 with an indent of only 100 nm, compared with a macroscopic hardness of HV 210. The difference, HV 80, is considered to reflect the amount of grain-boundary strengthening. The critical indent size for the hardness transition seems to be around 1 μm, comparable to the grain size of the specimen. This result supports the explanation of grainboundary strengthening. It is also consistent with Pickering’s work on low-carbon steel, as the estimated locking parameter (k of 2.6×10⁵ N/m^3/2) in the Hall-Petch relationship is in good agreement with his value of 2.4×10⁵ N/m^3/2.     

Urinary leukotriene E4 and 11-dehydrothromboxane B2 in patients with aspirin-sensitive asthma

The objective of this study was to define the participation of cysteinyl leukotrienes (LTs) or thromboxane A2 in the pathogenesis of aspirin-sensitive asthma (ASA). Leukotriene E4 (LTE4) and 11-dehydrothromboxane B2 (11DTXB2) values in spot urine were measured in 22 asthmatics with a history of aspirin sensitivity and in 17 without such a history (non-aspirin-sensitive asthma [NASA]) in the outpatient clinic. The urinary LTE4 value was significantly higher in ASA patients than in NASA (340 +/- 47 vs 65 +/- 15 pg/mg.cr, P < 0.001), but there was no significant difference in urinary 11DTXB2 between the two groups (891 +/- 77 vs 657 +/- 90 pg/mg.cr). A high value of LTE4 was not associated with type of asthma, severity of disease, oral prednisolone treatment, sex, or age. A higher value of 11DTXB2 was observed in the atopic type than the nonatopic type in ASA (1086 +/- 111 vs 697 +/- 147 pg/mg.cr, P < 0.05). No correlation was observed between urinary LTE4 and 11DTXB2 in either ASA or NASA. In conclusion, LTs may play an important role in the pathogenesis of ASA, and TXA2 in the pathogenesis of the atopic type in ASA.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.