Numerical studies in dynamic fracture mechanics

This paper provides a summary of recent studies concerning numerical modeling of dynamic crack-propagation, Both stationary mesh as well as moving mesh finite-element procedures are examined. Simple procedures, using a moving mesh of conventional isoparametric elements in conjunction with certain path-independent integrals for the evaluation of stress-intensity factors for a dynamically propagating crack are presented.

---

Résumé Le mémoire fournit des synthèses des études récentes relatives à la modélisation numérique de la propagation de fissures dynamiques. On examine, à la fois, le maillage stationaire et le maillage mobile utilisés dans les procédures d'éléments finis. On présente des procédures simples utilisant un maillage mobile d'éléments conventionnels isoparamétriques utilisé avec certaines intégrales indépendantes du parcours, en vue d'évaluer les facteurs d'intensité de contrainte dans le cas d'une fissure en cours de propagation dynamique.

     

The polymerization of N-vinylcarbazole in the presence of carbon black

In order to obtain more detailed information on the mechanism of the polymerization of N-vinyl-carbazole (N-VC) in the presence of carbon black, a comparison of the rates of conversion under various conditions was made and the following results were obtained. The phenolic hydroxyl groups on the surface of carbon black were found to have an ability to initiate the polymerization, and an increase in dielectric constant of the solvent increased the rate of polymerization. Using the mixture of N-VC and comonomers such as styrene or methyl methacrylate, we found that styrene gives a copolymer with N-VC, while methyl methacrylate gives no copolymer during the early stage of polymerization. The phenomena observed here indicate that the nature of polymerization of N-VC initiated by carbon black is cationic.     

Carbon-13 NMR spectroscopic analysis of 24-methyl-Δ5,22-sterols in rape and mustard seed oils

24-Methylcholesta-5,E-22-dien-3β-ol (C₂₈ Δ^5,22-sterol) was separated from the unsaponifiable matters of the following eight seed oils of Brassica species:Brassica campestris (candle I and II and torch),B. napus (tower and midas),B. juncea (brown and oriental mustards), andB. alba (yellow mustard). The configuration at C-24 methyl group of the respective sterols was evaluated by¹³C NMR spectroscopy. All the C₂₈ Δ^5,22-sterols in the Brassica seed oils were found to contain the C-24 epimer of brassicasterol,trans-22-dehydrocampesterol, in the range of ca. 10–30%.     

Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Preparation of β-Fesi2 thin film by metal organic chemical vapor deposition using iron-carbonyl and mono-silane

β-FeSi₂ films were deposited at 750 °C by a supplying Fe(CO)₅ and SiH₄ simultaneously during metal organic chemical vapor deposition (CVD). Films could be deposited using this precursors system, even though film deposition was not ascertained by the single supply of Fe(CO)₅. Fe(CO)₅ was probably decomposed in gas phases before it reached to substrate surface. It was suggested that a kind of intermediate reactant which was more stable than Fe(CO)₅ created by the simultaneous supply of Fe(CO)₅ and SiH₄ makes Fe-Si films. Epitaxial β-FeSi₂ films were obtained on Si(111) substrates, and neither carbide nor oxide phases were detected on XRD patterns.     

Mutated KIT Tyrosine Kinase as a Novel Molecular Target in Acute Myeloid Leukemia

KIT is a type-III receptor tyrosine kinase that contributes to cell signaling in various cells. Since KIT is activated by overexpression or mutation and plays an important role in the development of some cancers, such as gastrointestinal stromal tumors and mast cell disease, molecular therapies targeting KIT mutations are being developed. In acute myeloid leukemia (AML), genome profiling via next-generation sequencing has shown that several genes that are mutated in patients with AML impact patients’ prognosis. Moreover, it was suggested that precision-medicine-based treatment using genomic data will improve treatment outcomes for AML patients. This paper presents (1) previous studies regarding the role of KIT mutations in AML, (2) the data in AML with KIT mutations from the HM-SCREEN-Japan-01 study, a genome profiling study for patients newly diagnosed with AML who are unsuitable for the standard first-line treatment (unfit) or have relapsed/refractory AML, and (3) new therapies targeting KIT mutations, such as tyrosine kinase inhibitors and heat shock protein 90 inhibitors. In this era when genome profiling via next-generation sequencing is becoming more common, KIT mutations are attractive novel molecular targets in AML.     

Three-dimensional simulating of concentrator photovoltaic modules using ray trace and equivalent circuit simulators

A 3-dimensional (3D) simulation for a concentrator photovoltaic (CPV) module using a triple-junction solar cell was developed. By connecting ray-trace simulation for an optics model and 3D equivalent circuit simulation for a triple-junction solar cell, the operating characteristics of a CPV module were calculated. By using the 3D simulation, we considered the influence of tracking error on the CPV module. It was found that maximum output power was not correlated with optical efficiency of the optics system and was strongly dependent on fill factor. We can use this total 3D simulation for the evaluation and optimization of CPV modules.     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.