Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.     

A three-segment anisomorphic constant life diagram for the fatigue of symmetric angle-ply carbon/epoxy laminates at room temperature

The anisomorphic constant fatigue life (CFL) diagram approach that was developed in an earlier study is further tested for applicability to the matrix-dominated fatigue failure in symmetric angle-ply carbon/epoxy laminates. An extension of the CFL diagram approach is also attempted to improve the accuracy of fatigue life prediction. The original anisomorphic CFL diagram approach can be used for approximately predicting the CFL diagrams for the [±30]_3S and [±45]_3S laminates, while it fails to accurately predict the CFL diagram for the [±60]_3S laminate due to its significant local distortion. For accommodating the anisomorphic CFL diagram approach to the local distortion in CFL curves due to a significant change in mean stress sensitivity in fatigue, a transitional segment is inserted between the tension–tension and compression–compression dominated segments. It is demonstrated that the three-segment anisomorphic CFL diagram approach allows improved predictions of the CFL diagrams and S–N relationships for the angle-ply laminates.     

Metal-Induced Structural Switching of a Folded Quinone-Sandwiched Porphyrin

We report the synthesis of a novel quinone-sandwiched porphyrin in which two benzoquinones are connected oppositely at the meso positions of a porphyrin through rigid 3-amido 2,2′-bipyridine linkers. ¹H-NMR and single crystal X-ray analyses revealed that the quinone-sandwiched porphyrin has a folded structure in which the porphyrin unit was inserted into the two quinone moieties via π-stacking. Insertion of a Zn(II) ion into the porphyrin center induced a drastic conformational change which is resulted in coordination of the oxygen atoms of both benzoquinone moieties to the Zn-porphyrin to afford a 6-coordinated structure.     

Polyurea thin film ultrasonic transducers for nondestructive testing and medical imaging

Ultrasonic transducers using polyurea piezoelectric thin film are studied in this paper. Aromatic polyurea thin films, prepared by vapor deposition polymerization, have useful characteristics for use as an ultrasonic transducer. This paper presents the fabrication and experimental evaluation of ultrasonic transducers formed using polyurea films. First, the vapor deposition polymerization process using two monomers is briefly reviewed, and the temperature conditions for higher piezoelectric constants are explored. Second, in order to test the fundamental characteristics of this material as a high-frequency, ultrasonic transducer, a polyurea film of 2.5 microm thickness was deposited on a silicon substrate. In the pulse/echo experiment results, a resonant frequency of about 100 MHz was observed. Third, we fabricated a concave point focus transducer and a cylindrical line focus transducer. To examine the performances of the focus transducers, two-dimensional images of a coin and V(z) curve measurements for an aluminum surface were demonstrated.     

Effect of lubricant fluid on plastic metal flow in sliding contact

Plastic metal flow in surface layers, especially “abnormal metal flow”, in which the direction of metal flow in the inner surface layer is different from that in the layer nearer the surface, in sliding contacts between a pin of cemented carbide and a ring of steel under lubrication is discussed in this paper. Low viscosity mineral oil is used as a base oil. Sulphide and chloride extreme pressure additives are also mixed with the base oil. Such a lubricant has a great influence on the plastic metal flow of a ring.While base oil produces severe plastic metal flow, the sulphide additive causes the plastic metal flow to be very mild. In contrast, a lubricant containing a chloride additive causes abnormal metal flow, where cracks can be seen. Conditions for and causes of abnormal metal flow are investigated.     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.     

Chiral lewis acid-catalyzed enantioselective michael reactions in water

Asymmetric Michael reactions of ß-ketoesters with enones were effectively catalyzed by complexes of silver salts and BINAP derivatives in water. The reactions have proved to give Michael adducts in high yields with high enantioselectivities. These reactions are the first example of Lewis acid-catalyzed asymmetric Michael reactions in water.     

Dependence of ion selectivity on ordered orientation of neutral carriers in ion-sensing membranes based on thermotropic liquid crystals

Thermotropic liquid-crystalline compounds were applied as membrane materials (membrane solvent and neutral carrier) for neutral carrier-type ion sensors to investigate how the ordered arrangement of neutral carriers affects the property of the resulting ion sensors. Nematic, smectic, and cholesteric liquid-crystalline compounds were used as the membrane solvents and crown ether derivatives with a molecular structure similar to the liquid-crystalline solvent as the K+ neutral carriers. Polarized IR spectroscopy and X-ray diffraction experiments confirmed that the highly ordered arrangement of membrane components was retained in the liquid-crystal-based ion-sensing membranes containing a neutral carrier and a lipophilic salt. The ordered arrangement of neutral carriers in the liquid-crystalline membranes enhanced the ion selectivity significantly, probably due to the efficient cooperation of two adjacent crown ether moieties in the highly ordered and aggregated state.     

Lithiophilic 3D Nanoporous Nitrogen‐Doped Graphene for Dendrite‐Free and Ultrahigh‐Rate Lithium‐Metal Anodes

The key bottlenecks hindering the practical implementations of lithium‐metal anodes in high‐energy‐density rechargeable batteries are the uncontrolled dendrite growth and infinite volume changes during charging and discharging, which lead to short lifespan and catastrophic safety hazards. In principle, these problems can be mitigated or even solved by loading lithium into a high‐surface‐area, conductive, and lithiophilic porous scaffold. However, a suitable material that can synchronously host a large loading amount of lithium and endure a large current density has not been achieved. Here, a lithiophilic 3D nanoporous nitrogen‐doped graphene as the sought‐after scaffold material for lithium anodes is reported. The high surface area, large porosity, and high conductivity of the nanoporous graphene concede not only dendrite‐free stripping/plating but also abundant open space accommodating volume fluctuations of lithium. This ingenious scaffold endows the lithium composite anode with a long‐term cycling stability and ultrahigh rate capability, significantly improving the charge storage performance of high‐energy‐density rechargeable lithium batteries.     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278