Preparation of ultrafine polyurethane fiber web by laser‐electrospinning combined with air blowing

Thermoplastic polyurethane fiber webs were prepared using a laser‐heated electrospinning process combined with air blowing. The effect of spinning conditions such as air flow rate and air temperature on fiber diameter and molecular weight was investigated. Although the average fiber diameter decreased with increased air flow rate at each air temperature, the diameter increased when the air flow rate was >15 NL min^?1. In addition, the fiber was comparatively thicker with an increase in the air temperature. The variation in the fiber diameter tends to increase with the air flow rate, and a reduction in the molecular weight of the fiber by thermal degradation was suppressed. The thinnest and most uniform fiber with a diameter of 0.9 µm and a diameter coefficient variation of 15% was obtained at an air temperature of 25°C under an air flow rate of 15 NL min^?1. This fiber also had a minimum of decreased molecular weight. POLYM. ENG. SCI., 54:2605–2609, 2014. © 2013 Society of Plastics Engineers     

Study on performance and flow field of an undershot cross-flow water turbine comprising different number of blades

Recently,small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels.The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines.However,because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines,it remains unclear whether the number of blades has an effect on the performance or flow fields.Thus,in this research,experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades.The findings show that the turbine output and torque are lower,the fluctuation is significantly higher,and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.     

Chiral lewis acid-catalyzed enantioselective michael reactions in water

Asymmetric Michael reactions of ß-ketoesters with enones were effectively catalyzed by complexes of silver salts and BINAP derivatives in water. The reactions have proved to give Michael adducts in high yields with high enantioselectivities. These reactions are the first example of Lewis acid-catalyzed asymmetric Michael reactions in water.     

Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

A three-dimensional soil–water coupled FE analysis of hollow cylinder test concerning non-uniform deformation

The hollow cylinder shear test is somewhat controversial due to its non-uniform stresses and strains, and has been analyzed by simple theoretical methods and two-dimensional FE calculations. In this paper, the hollow cylinder test under strain control was carried out numerically by treating the specimen as a three-dimensional initial-boundary value problem considering the inertial forces. At first, besides the known nonuniform strain, the non-uniformities of excess pore water pressure and overconsolidation ratio have been shown to benefit from a soil–water coupled analysis that employs the SYS Cam-clay model. Then, the influence of the specimen geometries, including wall thicknesses, heights and outer diameters on the non-uniformity was investigated sequentially. A new method for evaluating non-uniformity was proposed, which is suitable for the three-dimensional analysis. The response under a uniform deformation field, which is indicated by “the perfect path”, was presented to draw a comparison with the apparent behaviors, with non-uniformities taken into consideration. It should be noted that there is a critical height to prevent failure at the specimen ends according to the apparent behavior. Finally, the torque-controlled experiment indicated that 4 ribs could not transfer the torque reliably while 6 or 8 ribs were feasible.     

Synthesis of optical quality ZnO nanowires utilizing ultrasonic spray pyrolysis

ZnO nanowires were grown by an ultrasonic spray pyrolysis technique. The aspect ratio and size of the wire were dependent mainly on the pH value of a precursor solution and the growth temperature. By high-resolution transmission electron microscopic analysis and photoluminescence measurements, it was confirmed that the nanowires are monocrystalline with good optical quality.     

Processing effects on in-flight particle state and functional coating properties of plasma-sprayed manganese zinc ferrite

Magnetic properties of manganese zinc ferrite (MZF) coatings deposited by atmospheric dc plasma spraying largely depend on zinc and oxygen loss during particle flight. The temperature and velocity of in-flight MZF particles were widely varied by changing plasma spray conditions to examine these chemistry changes and resultant magnetic properties. Zn loss increases with increased particle temperature or decreased particle velocity. Meanwhile, wüstite (FeO) formation, related to the oxygen loss, is more complicated, partly because oxygen, which is lost during flight in the high-temperature zone of the plasma jet, can be recovered at longer spray distances. As a result, the saturation magnetization of MZF coatings decreases and the coercivity increases with increased particle temperature or decreased particle velocity.