Two-temperature chemically-non-equilibrium modeling of argon induction plasmas with diatomic gas

A non-equilibrium modeling of argon–oxygen and argon–hydrogen induction thermal plasmas was performed without thermal and chemical equilibrium assumptions. Reaction rates of dissociation and recombination of diatomic gas and ionization were taken into account with two-temperature modeling. A substantial deviation from LTE exists near the torch wall in argon–oxygen induction plasmas under atmospheric pressure, while small deviation in argon–hydrogen plasmas results from the large collision frequency between electrons and hydrogen atoms.     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

Photoactive Electro-Controlled Visual Perception Memory for Emulating Synaptic Metaplasticity and Hebbian Learning

In bionic technology, it has become an innovative process imitating the functionality and structuralism of human biological systems to exploit advanced artificial intelligent machines. Bionics plays a significant role in environmental protection, especially for its low energy loss. By fusing the concept of receptor-like sensing component and synapse-like memory, the photoactive electro-controlled optical sensory memory (PE-SM) is proposed and realized in a single device, which endows a simple methodology of reducing power consumption by photoactive electro-control. The PE-SM is the system built with the stacked atomically thick materials, in which rhenium diselenide serves as a robust photosensor, hexagonal boron nitride serves as a tunneling dielectric, and graphene serves as a charge-storage layer. With the features of the PE-SM, it performs synaptic metaplasticities under optical spikes. In addition, a simulated spiking neural network composed of 24 × 24 PE-SMs is further presented in an unsupervised machine learning environment, performing image recognition via the Hebbian rule. The PE-SM not only improves the neuromorphic computing efficiency but also simplifies the circuit-size structure. Eventually, the concept of photoactive electro-control can extend to other photosensitive 2D materials and provide a new approach of constructing either visual perception memory or photonic synaptic devices.     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

A 99-mm2 0.7-W single-chip MPEG-2 422P@ML video, audio,and system encoder with a 64-Mb embedded DRAM for portable 422P@HLencoder system

A scalable single-chip 422P@ML MPEG-2 video, audio, and system encoder LSI for portable 422P@HL system is described. The encoder LSI is implemented using 0.13-μm embedded DRAM technology. It integrates 3-M logic gates and 64-Mb DRAM in an area of 99-mm². The power consumption is suppressed to 0.7 W by adopting a low-power DRAM core. It performs real-time 422P@ML video encoding, audio encoding, and system encoding with no external DRAM. Furthermore, the encoder LSI realizes a 422P@HL video encoder with multichip configuration, due to its scalable architecture. This results in a PC-card size 422P@HL encoder for portable HDTV codec system     

Bias-stress-induced increase in parasitic resistance of InP-based InAlAs/InGaAs HEMTs

The reliability of InP-based HEMTs is studied, focussing on how it is affected by the doped layer material and gate recess structure. Bias-and-temperature stress tests reveal that fluorine-induced donor passivation in the recess region, formed adjacent to the gate electrode, causes the source resistance (R_s) to increase at large drain bias voltages. The increase in R_s can be prevented by using InP or InAlP as the carrier supply layer material instead of InAlAs. On the other hand, the increase in the drain resistance (R_d) does not depend on the material of the carrier supply layer, which suggests that a mechanism different from that in the case of R_s should be considered. It is also found that a deep gate recess suppresses the increase in R_d after long-term stressing.     

Photosensitivity in low-loss perfluoropolymer (CYTOP) fibrematerial

Photosensitivity in a perfluoropolymer (CYTOP) optical fibre is investigated. Significant diffraction has been observed from transmission gratings made from the fibre. A maximum diffraction efficiency of 1.6% has been achieved, corresponding to an index change ≃3×10^-4. The study demonstrates for the first time the existence of significant photosensitivity and the feasibility of writing a Bragg grating in a CYTOP fibre     

Generation control circuit for photovoltaic modules

Photovoltaic modules must generally be connected in series in order to produce the voltage required to efficiently drive an inverter. However, if even a very small part of photovoltaic module (PV module) is prevented from receiving light, the generation power of the PV module is decreased disproportionately. This greater than expected decrease occurs because PV modules which do not receive adequate light cannot operate on the normal operating point, but rather operate as loads. As a result, the total power from the PV modules is decreased if even only a small part of the PV modules are shaded. In the present paper, a novel circuit, referred to as the generation control circuit (GCC), which enables maximum power to be obtained from all of the PV modules even if some of the modules are prevented from receiving light. The proposed circuit enables the individual PV modules to operate effectively at the maximum power point tracking, irrespective of the series connected PV module system. In addition, the total generated power is shown experimentally to increase for the experimental set-up used in the present study     

Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

A real-time motion estimation and compensation LSI with wide searchrange for MPEG2 video encoding

This paper presents a motion estimation and compensation large scale integration (LSI) for the MPEG2 standard. An embedded RISC processor and special hardware modules enable the LSI to achieve a sufficient ability to perform real-time operation and provide the availability to realize many kinds of block matching algorithms. Using a three-step hierarchical telescopic search algorithm, a single chip accomplishes real-time motion estimation with search ranges of ±32.5×±32.5 pixels for motion vectors. The chip was fabricated using 0.5-μm CMOS technology and has an area of 16.5×16.5 mm² and 2.0 M transistors