连续冶炼冶金焦工艺初探──（Ⅰ）现状分析和连续混热式焦炉的结构

本文论述了炼焦工艺的现状和发展方向，分析了存在的问题，提出了一种全新的连续型混热式冶金焦炉结构及其工艺流程，为焦化工业的发展探讨了一条新的途径。     

Synthesis of Biodiesel from Soybean Oil using Heterogeneous KF/ZnO Catalyst

Biodiesel was produced by transesterification of soybean oil with methanol using ZnO loaded with KF as a solid base catalyst. It was found that the catalyst with 15 wt.% KF loading and calcined at 873 K showed the optimum activity. XRD, IR and Hammett indicator method were employed for the catalyst characterization. The results showed the activity of the catalysts was correlated with their basicity. The influence of various reaction variables on the conversion was also discussed.     

Reaction kinetics study of asymmetric polymer-polymer interface

In this study, the reaction kinetics of asymmetric polymer-polymer interface was experimentally and theoretically studied. A new rheological method correlating the change of rheological property of reactive system with the conversion of the in situ formed copolymers was applied to study the reaction kinetics of PBT/epoxy reactive system. Then, the new method was proved to be useful by comparing its results with that obtained from the conventional endgroup determination method. Moreover, the conversion of PBT/epoxy reactive system from rheological method could be well fitted by the numerical analysis, from which the kinetic constant and the diffusion constant of epoxy in PBT could be determined simultaneously.     

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

Supported Vanadia Catalysts for Dehydrogenation of Ethylbenzene with CO2

Alumina supported vanadia catalysts (V/Al) for selective oxidehydrogenation of ethylbenzene with CO₂ were prepared by impregnation method. During preparation the effect of promoters and calcined temperature was investigated, it was found these two items had a strong influence on the activity of V/Al catalysts. Dehydrogenation reaction with CO₂ was happened in the fixed-bed reactor at 450 °C. Results showed that 15.2% ethylbenzene conversion and 99.2% styrene selectivity were acquired when V₂K/Al catalyst was used.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.     

裙子变长 奢华依旧——浅析经济危机下的时装流行走向

在全球性事件的大背景下,流行趋势研究更能显示出其价值,本文通过分析经济危机下时装行业的最新动态,总结并预测时装流行及时装业发展的未来走向,可以提供给中国时装业一些思考。     

计算机在化工设计中的应用

计算机用于化工设计有着独特的优点。比如在分子模拟、稳态流程模拟和计算机辅助设计(Computer Aided Design)等领域。化工设计者应敏锐地看到计算机技术在化工设计中显示出的发展潜力。