Influence of drying and extraction methods on yield and chemical composition of the essential oil of Satureja hortensis

The aerial parts of Satureja hortensis, cultivated in Iran (Research Station of Alborz, Karaj), were collected at the full-flowering stage and dried by three different drying methods (sun-drying, shade-drying and oven-drying at 45 °C). The essential oils of every treatment were obtained by hydro-distillation of the aerial parts. In addition, the essential oil of shade-dried sample was obtained by two other distillation methods (water- and steam-distillation and direct steam-distillation). The oils were analyzed by capillary GC and GC–MS. Statistical analysis showed no significant difference between oil yield (w/w) of the oven-dried sample (1.06%) compared to shade-dried (0.94%) and sun-dried (0.87%). The oil content of the shade-dried sample, obtained by hydro-distillation, was higher (0.94%) than that of the steam-distilled (0.27%). Twenty-three components were identified in the oil of S. hortensis in the different drying methods, including carvacrol (46.0–48.1%) and γ-terpinene (37.7–39.4%) as main components. Seventeen compounds were characterized in the oils of different distillation methods, including carvacrol (12.3–46%) and γ-terpinene (37.7–70.4%). Although the drying methods had no significant effect on oil composition of S. hortensis, the distillation changed the percentage of main components sharply (significant at 1%). The steam-distillation method produced the lowest amount of carvacrol and highest amount of γ-terpinene. The results showed that extraction by hydro-distillation gave the best results for S. hortensis, based on oil yield and carvacrol percentage.     

Epoxy coating with self-healing capability based on a 2-mercaptobenzothiazole-loaded CeO2 nanocontainer

In this study, we demonstrated a facile approach for the synthesis of nanocontainers using the encapsulation of a 2-mercaptobenzothiazole (MBT) inhibitor; these nanocontainers were capable of responsively releasing a corrosion inhibitor and of self-healing performances. The anticorrosive performance of the CeO₂ nanocontainers was investigated with electrochemical impedance spectroscopy (EIS) measurement in a saline electrolyte via the incorporation of different weight percentages (0.5, 1, and 2 wt %) of synthesized nanocontainer in epoxy (EP) resin. The EIS results show that the loading of 1 wt % CeO₂ nanocontainer containing MBT inhibitor in the epoxy (EP) coating [EP/NC MBT–CeO₂ (1%)] provided the highest R_coat, the lowest constant phase element of coating, and the optimum release of MBT at different operating pHs. The highest coating resistance R_coat values of this coating (7.81 × 10⁷ Ω cm²) were about 12 and 8573 times greater than those considered for EP–CeO₂ and EP coatings, respectively. Different releases of the MBT inhibitor were detected at various pHs. We found that the coating operating in acidic media exhibited a better self-healing performance. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47297.     

Oxygen adsorption and desorption characteristics of LSCF5582 membranes for oxygen separation applications

This study examines the oxygen adsorption and desorption characteristics of La_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (LSCF5582) membranes prepared at sintering temperatures of 1200–1300 °C, with the aim of gaining an insight into their performance in the surface reaction limited regime for oxygen separation applications. The findings of this work are then compared with our experimental data on Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF5582) membranes. It is demonstrated that the adsorption rate constants of both membranes are two orders of magnitude greater than their respective oxygen desorption rate constants as the oxygen adsorption occurs in less than 24 s whilst the oxygen desorption takes approximately one hour to reach equilibrium. The activation energy for oxygen adsorption of LSCF5582 reduced to a quarter of its value with increasing the sintering temperature from 1200 °C to 1300 °C. This is attributed to the oxygen exchange occurring more rapidly along the grain boundaries resulting in a lower activation energy. The LSCF5582 grain sintered at 1200 °C is the optimum selection for oxygen separation applications at an operating temperature of 850 °C and oxygen partial pressure of 0.21 bar.     

Convenient method for preparation of a new absorbent based on biofunctionalized graphene oxide hydrogels using nitrene chemistry and click reaction

A new graphene oxide (GO)-based hydrogel was synthesized through cross-linking of biofunctionalized graphene oxide nanosheets by di-alkyne polyethylene glycol as cross-linking agent. In this respect, nitrene chemistry as a convenient and straightforward protocol was developed for biofunctionalization of GO using an azido-starch as an eco-friendly, biodegradable and cost-effective material. In the next step, 1,3-dipolar cycloaddition chemistry, a green and highly efficient approach was utilized in cross-linking of functionalized GO by PEG through click reaction between remaining azido groups of starch on the surface of GO sheets and terminal alkyne groups of polyethylene glycol. Formation of aziridine and triazole rings during functionalization and cross-linking in this method could evidently improve biological activities of the obtained hydrogel compared to the conventional methods. The antibacterial activity of the new compounds was explored. The synthesized hydrogel showed antibacterial properties against Gram-positive and Gram-negative bacteria due to the presence of triazole rings. Also, the resulting hydrogel exhibited high dye removal efficiency and it can be utilized in water treatment effectively. The adsorption kinetics was analyzed through the effects of adsorption time and the dye concentration on the adsorption capacity. Kinetic data were accurately described by a pseudo-second-order model.     

Comparison of pristine and polyaniline‐grafted MWCNTs as conductive sensor elements for phase change materials: Thermal conductivity trend analysis

Phase change materials (PCMs) function based on latent heat stored on or released from a substance over a slim temperature range. Multiwalled carbon nanotubes (MWCNTs) and polyaniline are important elements in sensor devices. In this work, pristine and polyaniline‐grafted MWCNTs (PANI‐g‐MWCNTs) were applied as conductive carbon‐based fillers to make PCMs based on paraffin. The attachment of PANI to the surface of MWCNTs was proved by Fourier transform Infrared analysis. Dispersion of MWCNTs in paraffin was studied by wide‐angle X‐ray scattering. Heating and solidification of PCM nanocomposites were investigated by differential scanning calorimetry, while variation in nanostructure of PCMs during heating/solidification process was evaluated by rheological measurements. It was found that after 30 min of sonication, the samples filled with 1 wt % MWCNTs have melting and solidification temperatures of 29 and 42 °C, respectively. It was also found that PANI attachment to MWCNTs significantly changes thermal conductivity behavior of PCM nanocomposites. The developed MWCNTs‐based sensor elements responded sharply at low MWCNTs content, and experienced an almost steady trend in conductivity at higher contents, while PANI‐g‐MWCNTs sensor followed an inverse trend. This contradictory behavior brought insight for understanding the response of PCMs against thermal fluctuations. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45389.     

Synthesis and Characterization of ZnO Nanoparticles via Thermal Decomposition of Two Zinc(II) Supramolecular Compounds

A new nano-sized Zn(II) complex, [Zn(5,5′-dtbu-2,2′-bipy)Cl₂] _n (1) was synthesized and its structure determined by X-ray crystallography. The new nano-sized complex was prepared at oleic acid as a surfactant at 280 °C and characterized by scanning electron microscopy, elemental analyses and IR spectroscopy. The ZnO nano-particles were synthesized from thermolysis of nano-compound 1 at 600 °C and similar compound, [Zn(5,5′-dimethyl-2,2′-bipy)Cl₂] _n (2), at two different methods. SEM images show the average size of ZnO nano-particles are 78 and 50 nm for the compounds 1 and 2, respectively.     

Development and application of vanadium oxide/polyaniline composite as a novel cathode catalyst in microbial fuel cell

Polyaniline (Pani), vanadium oxide (V₂O₅), and Pani/V₂O₅ nanocomposite were fabricated and applied as a cathode catalyst in Microbial Fuel Cell (MFC) as an alternative to Pt (Platinum), which is a commonly used expensive cathode catalyst. The cathode catalysts were characterized using Cyclic Voltammetry and Linear Sweep Voltammetry to determine their oxygen reduction activity; furthermore, their structures were observed by X‐ray Diffraction, X‐ray Photoelectron Spectroscopy, Brunauer–Emmett–Teller, and Field‐Emission Scanning Electron Microscopy. The results showed that Pani/V₂O₅ produced a power density of 79.26 mW/m², which is higher than V₂O₅ by 65.31 mW/m² and Pani by 42.4 mW/m². Furthermore, the Coulombic Efficiency of the system using Pani/V₂O₅ (16%) was higher than V₂O₅ and Pani by 9.2 and 5.5%, respectively. Pani–V₂O₅ also produced approximately 10% more power than Pt, the best and most common cathode catalyst. It declares that Pani–V₂O₅ can be a suitable alternative for application in a MFC system. Copyright © 2013 John Wiley & Sons, Ltd.     

Grafting of ion-imprinted polymers on the surface of silica gel particles through covalently surface-bound initiators: a selective sorbent for uranyl ion

A new ion imprinted polymer coated silica gel sorbent has been prepared using the radical "grafting from" polymerization method through surface-bound azo initiators for selective uranyl uptake. The introduction of azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4'-azobis(4-cyanopentanoic acid chloride). The grafting step was then carried out in a stirred solution of initiator-modified silica particles in the presence of uranyl ion and functional and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy (SEM), elemental analysis (EA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and BET adsorption isotherm analysis. The influence of the uranyl concentration, pH, and flow rate of solution on the grafted polymer affinity has been investigated. Maximum uptake of uranyl ion was observed at a pH 3.0. The rebinding behavior of the sorbent has been successfully described by the Langmuir-Freundlich isotherm. The dynamic column capacity of sorbent and enrichment factor for uranyl ion were 52.9 +/- 3.4 micromol g(-1) and 52, respectively. It was found that imprinting results in increased affinity of the sorbent toward uranyl ion over strong competitor metal ions such as Fe(III) and Th(IV). The sorbent was repeatedly used and regenerated for 3 months without any significant decrease in polymer binding affinities. Finally the sorbent was applied to the preconcentration and determination of uranyl ion in real water samples.     

Highly selective and sensitive voltammetric sensor based on modified multiwall carbon nanotube paste electrode for simultaneous determination of ascorbic acid,acetaminophen and tryptophan

A carbon-paste electrode modified with multiwall carbon nanotubes (MWCNTs) was used for the sensitive and selective voltammetric determination of ascorbic acid (AA) in the presence of 3,4-dihydroxycinnamic acid (3,4-DHCA) as mediator. The mediated oxidation of AA at the modified electrode was investigated by cyclic voltammetry (CV), chronoamperommetry and electrochemical impedance spectroscopy (EIS). Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for AA were calculated. Using square wave voltammetry (SWV), a highly selective and simultaneous determination of AA, acetaminophen (AC) and tryptophan (Trp) has been explored at the modified electrode. The modified electrode displayed strong function for resolving the overlapping voltammetric responses of AA, AC and Trp into three well-defined voltammetric peaks. In the mixture containing AA, AC and Trp, the three compounds can well separate from each other with potential differences of 200, 330 and 530 mV between AA and AC, AC and Trp and AA and Trp, respectively, which was large enough to determine AA, AC and Trp individually and simultaneously.