A convenient synthesis of alkyl-2-(2-imino-4-oxothiazolidin-5-ylidene)acetate derivatives involving an electrogenerated base of acetonitrile

We report a simple method for the synthesis of alkyl-2-(2-imino-4-oxothiazolidin-5-ylidene) acetate derivatives 3 in good yields under mild conditions. The electrogenerated cyanomethyl base (EGB), obtained from electroreduction of acetonitrile-0.1?M TBABF₄, assists the reaction between thiourea derivatives 1 and dialkyl acetylene dicarboxylate 2. The expected products, 3/4, and the structure obtained from X-ray diffraction confirm that the main products are the five-membered heterocycles 3. Furthermore, a mechanism, to explain the reaction pathways, is proposed based on the thermodynamic and kinetic data obtained from quantum calculations.     

Liquid‐phase axial dispersion of turbulent gas–liquid co‐current flow through screen‐type static mixers

This article discusses the characteristics of turbulent gas–liquid flow through tubular reactors/contactors equipped with screen‐type static mixers from a macromixing perspective. The effect of changing the reactor configuration, and the operating conditions, were investigated by using four different screen geometries of varying mesh numbers. Residence time distribution experiments were conducted in the turbulent regime (4500 < Re < 29,000). Using a deconvolution technique, the RTD function was extracted to quantify the axial/longitudinal liquid‐phase dispersion coefficient. The findings highlight that axial dispersion increases with an increasing flow rate and/or gas‐phase volume fraction. However, regardless of the number and geometry of the mixing elements, reactor configuration, and/or operating conditions, the recorded liquid‐phase axial dispersion coefficients in the presence of screens was lower than that for an empty pipe. Furthermore, the geometry of the screen was found to directly affect the axial dispersion coefficient in the reactor. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1390–1403, 2017     

An investigation of pore cracking in titanium welds

Two welded Ti-6A1-4V pressure vessels leaked prematurely in service. The leaks were caused by cracks emanating from weld porosity. The cracks originated during fabrication, with subsequent growth in service leading to the formation of the leak paths. Pore cracking is thought to be caused by a mechanism that involves both sustained-load and cyclic contributions, with the former being the more prominent. It is shown that the tendency for cracking is influenced by pore position and that pore size is not a deciding factor in that regard. The factors that govern pore cracking are discussed, and the possible role of interstitial embrittlement is assessed.     

Evaluation of electrochemical frequency modulation as a new technique for monitoring corrosion and corrosion inhibition of carbon steel in perchloric acid using hydrazine carbodithioic acid derivatives

Electrochemical frequency modulation, EFM is a new technique for corrosion rate measurements. With the EFM technique, the corrosion rate and corrosion kinetic parameters can be obtained instantaneously without prior knowledge of Tafel slopes, which makes this method an ideal technique for application as a corrosion monitoring tool. Results obtained with the EFM technique were shown to be in agreement with chemical (weight loss) and electrochemical methods (Tafel extrapolation and electrochemical impedance spectroscopy, EIS) for corrosion rate measurements. New synthesized hydrazine carbodithioic acid derivatives namely, N′-furan-2-yl-methylene-hydrazine carbodithioic acid (A), N′-(4-dimethylamino-benzylidene)-hydrazine carbodithioic acid (B) and N′-(3-nitro-benzylidene)-hydrazine carbodithioic acid (C) were examined as corrosion inhibitors for carbon steel in 1 M perchloric acid solution. The results obtained from both chemical and electrochemical measurements show that these compounds suppressed both anodic and cathodic processes of carbon steel corrosion in 1 M HClO₄ by adsorption on the electrode surface. The adsorption mode follows the Langmuir adsorption isotherm. The efficiency of the inhibitors increases in the order C > B > A.     

Low temperature preparation and characterization of nanospherical anatase TiO2 and its photocatalytic activity on Congo red degradation under sunlight

Nanospherical titanium oxide with anatase structure was obtained at low temperature and normal pressure using a simple method of preparation. The dilute titanium (III) chloride solution was stirred at room temperature for several hours, and then ammonium hydroxide with hydrogen peroxide was added. A yellow gel TiO₂·xH₂O was obtained with nanodot shape and amorphous structure. Heated at 300 °C, it crystallized to pure anatase structure with nanospherical shape. The anatase particles prepared show good adsorption and photodegradation of Congo red solution under the sunlight. Materials were characterized by powder X-ray diffraction, thermal analysis, transmission electron microscope and UV spectroscopy.     

Soft chemistry preparation of layered Al0.3V2O5·5H2O

A novel layered compound Al_0.3V₂O₅·5H₂O was successfully prepared and characterized using powder X-ray diffraction, Thermal analysis, scanning and transmission electron microscopes. The new layered Al_0.3V₂O₅·5H₂O has like-nanowires shape and the layered structure was stable until 400 °C. At higher temperature (500 °C), it decomposes to orthorhombic Al_xV₂O₅ and triclinic AlVO₄.     

Synthesis and characterization of (poly (N-vinyl formamide)—pregelled starch—graft copolymer

Bromate / cyclohexanone redox system was investigated as a novel initiator for graft copolymerization of N-vinyl formamide onto pregelled starch. A number of variables in the grafting reaction were investigated including N-vinyl formamide, cyclohexanone, bromate ion, sulphuric acid and pregelled starch concentrations, material to liquor ratio along with polymerization time and temperature. The graft copolymers were evaluated in terms of graft yield, graft reaction efficiency and homopolymer formation (%). The optimum conditions for grafting of N-vinyl formamide onto pregelled starch are: N-vinyl formamide 50% based on weight of substrate, cyclohexanone 15 mmol / l, bromate ion, 30 mmol / l, liquor ratio 10, pH 6, time 120 min., and temperature 40°C. On the other hand, characterizations of the resultant copolymers with respect to swelling capacity, solubility %, metal ion up-take and suitability as a sizing agent for cotton textiles were investigated. The results obtained reflect that, the resultant copolymer shows better results for the aforementioned properties in comparison with that obtained from native pregelled starch as a starting substrate.     

Electrochemical behavior of nickel in nitric acid and its corrosion inhibition using some thiosemicarbazone derivatives

The adsorption and corrosion inhibition behavior of three selected thiosemicarbazone derivatives, namely 3-pyridinecarboxaldehyde thiosemicarbazone (META), isonicotinaldehyde thiosemicarbazone (PARA) and 2-pyridinecarboxaldehyde thiosemicarbazone (ORTHO) at the nickel surface were studied electrochemically by Tafel and impedance methods and computationally by carrying out Monte Carlo searches of configurational space on nickel/thiosemicarbazone derivative system. Electrochemical measurements showed that the inhibition efficiency of these compounds increased with increase in their concentration. The recorded inhibition efficiencies of the three tested thiosemicarbazone increase in the order: META > PARA > ORTHO. Polarization studies showed that these compounds act as mixed-type inhibitors for nickel corrosion in 1.0 M HNO₃ solutions. Results obtained from Tafel and impedance methods are in good agreement. Thiosemicarbazone derivatives have been simulated as adsorbate on Ni (1 1 1) substrate and the adsorption energy, binding energy and the low energy adsorption sites have been identified on nickel surface.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...