Dynamic watermarking scheme for quantum images based on Hadamard transform

In this paper, a novel watermarking scheme for quantum images based on Hadamard transform is proposed. In the new scheme, a unitary transform controlled by a classical binary key is implemented on quantum image. Then, we utilize a dynamic vector, instead of a fixed parameter as in other previous schemes, to control the embedding process. The dynamic embedding vector is decided by both the carrier quantum image and the watermark image, which is only known by the authorized owner. The proposed scheme is analyzed from visual quality, computational complexity, and payload capacity. Analysis and results show that the proposed scheme has better visual quality under a higher embedding capacity and lower complexity compared with other schemes proposed recently.     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Novel high strength graphitic foams

A novel high strength graphitic foam was produced through the incorporation of carbon nanofibers into a pitch based precursor. The nanofiber reinforced cellular foams were mechanically tested both from a localized and bulk perspective with results indicating enhanced foam performance with nanofiber addition. The magnitude of increased performance was a result of both the nanofiber itself as well as its heat treatment as an increase in each was found to cause an associated increase in foam performance. The increase in mechanical capability is attributed to the formation of a zigzag structure in the ligaments and nodes of the foam. This zigzag structure serves as an interlocking mechanism, preventing easy shearing of the graphene layers. The in situ fracture mechanics experiment shows brittle behavior of a single ligament indicating that only reinforced foam behaves like that of a carbon fiber.     

Effect of particle dimension on biocompatibility of carbon nanomaterials

With various emerging applications ranging from medicine to materials and electronics, the risk of exposure to nanomaterials is rapidly increasing. Several routes of exposure to nanomaterials exist; the most important being dermal contact and inhalation. In this dermal toxicity study, the cellular effects of carbon-based materials with diameters ranging from micro- to nano-dimension were investigated using mouse keratinocytes (HEL-30). The carbon materials tested included carbon fibers (CF; 10 μm diameter), carbon nanofibers (CNF; 100 nm diameter), multi-walled carbon nanotubes (MWCNT; 10 nm diameter), and single-walled carbon nanotubes (SWCNT; 1 nm diameter). CF and CNF did not significantly affect cell viability; however, MWCNT and SWCNT reduced cell viability in a time-dependent manner up to 48 h, with full recovery of mitochondrial function by the 72 h time point. After a 24 h exposure, cells exposed to MWCNT produced up to 3-fold higher increase in reactive oxygen species than those exposed to SWCNT. The results of this study suggest that high-aspect ratio carbon material toxicity is dependent on dimension and composition.     

Studies on the pulping of egyptian cotton linters by the nitric acid process

Egyptian cotton linters were pulped by the nitric acid process. In order to reduce the high ash and silica contents of the resulting pulps it was found necessary to apply hot refining with sodium hydroxide solution. Different conditions of concentration, temperature, and pressure in the refining step were investigated. Refining before and during bleaching were compared.     

Some phthalazin derivatives as non toxic corrosion inhibitors for copper in sulphuric acid

Phthalazin derivatives were tested as corrosion inhibitors of copper in 1 M H₂SO₄ using electrochemical polarization and weight loss techniques. This study monitored the evolution of the inhibitory effect of the phthalazin derivatives, according to their substituents. A significant decrease in the corrosion rate of copper was observed in the presence of the investigated inhibitors. The inhibition efficiency (%I) increases with increasing inhibitor concentration. The potentiodynamic polarization data indicated that, the inhibitors were of mixed type, but the cathodic effect is more pronounced. The slopes of the cathodic and anodic Tafel lines are approximately constant and independent on the inhibitor concentration. The mechanism of inhibition was discussed in the light of the chemical structure of the undertaken inhibitors. The adsorption on the copper surface follows the Langmuir isotherm model.     

Speech enhancement with an adaptive Wiener filter

This paper proposes an adaptive Wiener filtering method for speech enhancement. This method depends on the adaptation of the filter transfer function from sample to sample based on the speech signal statistics; the local mean and the local variance. It is implemented in the time domain rather than in the frequency domain to accommodate for the time-varying nature of the speech signals. The proposed method is compared to the traditional frequency-domain Wiener filtering, spectral subtraction and wavelet denoising methods using different speech quality metrics. The simulation results reveal the superiority of the proposed Wiener filtering method in the case of Additive White Gaussian Noise (AWGN) as well as colored noise.     

Electrodeposition of catalytically active nickel powders from sulphate baths. I. Effect of bath constituents

A detailed study was made of the influence of the sulphate bath constituents: 0.3 - 0.0125 NiSO₄·7H₂O (I), 0.05 – 0.23 (NH₄)₂SO₄ (II), 0.1 – 0.4 H₃BO₃ (III) and 0.07 – 0.35 mol l^?1 Na₂SO₄·10H₂O (IV) on the electrodeposition of nickel powder. The cathodic polarization, current efficiency, growth morphology, crystallite size and catalytic activity of the electrodeposited nickel powders were affected to different extents by the bath constituents. A highly pure nickel powder characterized by a small crystallite size (776 Å) and moderate catalytic activity was obtained from a bath containing: 0.0125 (I), 0.23 (II), 0.1 (III) and 0.07 mol l^?1 (IV) at a current density of 10 A dm^?2 and electrolysis time 60 min. at 25 °C. Structural studies with a scanning electron microscope are given and a reaction mechanism for the electrolytic powder deposition is discussed.     

Evaluation of Polyester Resin as a New Compatibilizer for SBR/PVC Blends

A polyester (PE) based on the glycolyzed products of PET was prepared and added in different concentrations to a series of SBR/PVC blends. The addition of the polyester showed that all properties of SBR/PVC blends were improved by incorporation of PE. Highest mechanical strength values were obtained at a polyester concentration of 7.5 phr. Thermal analysis as well as dynamic mechanical properties of SBR/PVC blends after the addition of 7.5 and 10 phr polyester indicated one single glass transition temperature. The dielectric losses (?") were analyzed in the frequency domains in the two terms of Fröhlich related to the Maxwell Wagner effect and the orientation of the aggregates caused by the movement of the main chain. The permittivity (?') values were found to increase by increasing the polyester content. This increase was followed by a decrease in the ?" up to a 7.5 phr polyester content after which no pronounced change was noticed.