Some peculiarities of electric discharge between a solid electrode and technical water

We present the results of experimental study of the electric discharge between metal electrodes of various geometry and technical water within the pressure range of 8 × 10³–10⁵ Pa at the saw-tooth voltage generator frequency, f = 40 MHz, and the interelectrode distance, l = 3–30 mm. We consider transfer of the streamer discharge into spark one depending on the geometry of the metal electrode and its material. We investigate the electrical characteristics of the discharge between the plate electrode and the technical water within a wide pressure range. The essential influence of the streamer discharge type on the ozone release within the investigated parameters range is discovered.     

Evaluation of rutting potential for asphalt concrete mixes containing copper slag

Copper slag (CS) is a by-product of the copper extraction process, which can be used as coarse and/or fine aggregate in hot mix asphalt (HMA) pavements. This study used CS as a replacement of the fine aggregate with a percentage of up to 40% by total aggregate weight. The objective of this study was to evaluate the effect of CS on the rutting potential of the asphalt concrete mix using two methods. One method is based on the Dynamic modulus |E*| testing result. Actual pavement temperature data from a test section were used with the developed |E*| master curves. EverStressFE finite element program was used to perform a linear elastic load-deformation analysis for a pavement section and to determine the vertical resilient strain in a 40-mm HMA surface layer. The M-E PDG permanent deformation model was used with and Excel Visual Basic for Applications code to predict the accumulated rutting for different CS mixes for 10 million ESALs. The other method used the data from the flow number (FN) test. Based on the |E*| approach, the results indicated that adding 5% CS in the mix increased the predicted rutting from 0.59 to 0.98 mm at 10 million ESALs (increase by 68%). When 40% CS was used, rutting increased by more than 700% compared with the control mix. After analysing the FN results with the Francken model, the results indicated a decrease in FN as CS content is increased, indicating higher rutting potential. The decrease in FN ranged from 9% for 5% CS to 95% for 40% CS. The mixes containing up to 10% CS satisfied the minimum FN criteria for rutting. A calibration process for the M-E PDG distress prediction models that allows the use of waste and by-product materials such as CS should be considered in the future.     

Region-based surveillance video retrieval with effective object representation

Retrieving the most relevant video frames that contain the object specified in a given query (query-by-region) remains a challenging task. Two common challenges of region-based retrieval approaches are to accurately extract or segment object(s) and select a proper matching strategy. This paper addresses these problems by proposing a retrieval approach that uses a new region-based matching technique equipped with an effective object representation method. In the first stage, the proposed approach selects the most informative instances of each object that appeared in the video by utilizing an adapted clustering algorithm over the extracted features. In the retrieval stage, the new matching technique returns the most relevant sequences of video by mapping a given region with those identified representative instances of objects based on their similarity scores. The proposed approach is evaluated on standard datasets and the results demonstrate a 31% improvement in the retrieval performance compared to other state-of-the-art methods.     

Effect of Initial Annealing Temperature on Microstructural Development and Microhardness in High‐Purity Copper Processed by High‐Pressure Torsion

The effect of the initial annealing temperature on the evolution of microstructure and microhardness in high purity OFHC Cu is investigated after processing by HPT. Disks of Cu are annealed for 1 h at two different annealing temperatures, 400 and 800 °C, and then processed by HPT at room temperature under a pressure of 6.0 GPa for 1/4, 1/2, 1, 5, and 10 turns. Samples are stored for 6 months after HPT processing to examine the self‐annealing effects. Electron backscattered diffraction (EBSD) measurements are recorded for each disk at three positions: center, mid‐radius, and near edge. Microhardness measurements are also recorded along the diameters of each disk. Both alloys show rapid hardening and then strain softening in the very early stages of straining due to self‐annealing with a clear delay in the onset of softening in the alloy initially annealed at 800 °C. This delay is due to the relatively larger initial grain size compared to the alloy initially annealed at 400 °C. The final microstructures consist of homogeneous fine grains having average sizes of ≈0.28 and ≈0.34 µm for the alloys initially annealed at 400 and 800 °C, respectively. A new model is proposed to describe the behavior of the hardness evolution by HPT in high purity OFHC Cu.     

Infrared Spectroscopy-Based Chemometric Analysis for Lard Differentiation in Meat Samples

One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and beef with different concentrations (10%–50% v/v). Principal component analysis (PCA) and partial least square (PLS) were used to develop a calibration model at 800–3500 cm⁻¹. Three-dimension PCA was successfully used by dividing the spectrum in three regions to classify lard meat adulteration in chicken, lamb, and beef samples. The corresponding FTIR peaks for the lard have been observed at 1159.6, 1743.4, 2853.1, and 2922.5 cm⁻¹, which differentiate chicken, lamb, and beef samples. The wavenumbers offer the highest determination coefficient R² value of 0.846 and lowest root mean square error of calibration (RMSEC) and root mean square error prediction (RMSEP) with an accuracy of 84.6%. Even the tiniest fat adulteration up to 10% can be reliably discovered using this methodology.     

Second Sound Measurements Near the Tricritical Point in 3He-4He Mixtures

In this paper we discuss a pulsed second sound experiment, aimed at determining accurately the critical exponent , and the predicted logarithmic correction to scaling, for the superfluid density along a tricritical path in the ³ He- ⁴ He phase diagram. We present an accurate estimate for the limits for closest approach to the tricritical point, as set by gravitationally induced sample inhomogeneities and finite size effects, and discuss some of the complications associated with measurements close to the tricritical point.     

A systematic method for efficient computation of full and subsets Zernike moments

A new method is proposed for fast and accurate computation of Zernike moments. This method presents a novel formula for computing exact Zernike moments by using exact complex moments where the exact values of complex moments are computed by mathematical integration of the monomials over digital image pixels. The proposed method is applicable to compute the full set of Zernike moments as well as the subsets of individual order, repetition and an individual moment. A comparison with other conventional methods is performed. The results show the superiority of the proposed method.     

An improved algorithm for disaggregating microwave-derived soil moisture based on red, near-infrared and thermal-infrared data

Accurate high-resolution soil moisture data are needed for a range of agricultural and hydrologic activities. To improve the spatial resolution of ∼ 40 km resolution passive microwave-derived soil moisture, a methodology based on 1 km resolution MODIS (MODerate resolution Imaging Spectroradiometer) red, near-infrared and thermal-infrared data has been implemented at 4 km resolution. The three components of that method are (i) fractional vegetation cover, (ii) soil evaporative efficiency (defined as the ratio of actual to potential evaporation) and (iii) a downscaling relationship. In this paper, 36 different disaggregation algorithms are built from 3 fractional vegetation cover formulations, 3 soil evaporative efficiency models, and 4 downscaling relationships. All algorithms differ with regard to the representation of the nonlinear relationship between microwave-derived soil moisture and optical-derived soil evaporative efficiency. Airborne L-band data collected over an Australian agricultural area are used to both generate ∼ 40 km resolution microwave pixels and verify disaggregation results at 4 km resolution. Among the 36 disaggregation algorithms, one is identified as being more robust (insensitive to soil, vegetation and atmospheric variables) than the others with a mean slope between MODIS-disaggregated and L-band derived soil moisture of 0.94. The robustness of that algorithm is notably assessed by comparing the disaggregation results obtained using composited (averaged) Terra and Aqua MODIS data, and using data from Terra and Aqua separately. The error on disaggregated soil moisture is systematically reduced by compositing daily Terra and Aqua data with an error of 0.012 vol./vol.     

Adaptive predistortion using threshold decomposition‐based piecewise linear modeling

A new adaptive predistortion approach for nonlinear power amplifiers based on the piecewise linear (PWL) approximation of nonlinear functions is presented. The PWL model is obtained using threshold decomposition (TD) of the input‐output characteristics. The TD based PWL model is used to develop a baseband predistorter using both the direct and the indirect learning architectures. The proposed predistorter is proved to provide a better performance in suppressing nonlinear distortion than conventional polynomial predistorters and a reduced hardware complexity as compared to lookup table (LUT) approach. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.