Morphological and palynological assessment of taxonomically problematic genus Paspalum based on light and scanning electron microscopy

Present research work was carried out to clarify the variations among species of genus Paspalum morphologically and palynologically as this genus is taxonomically difficult due to having multiple similar morphologically overlapping characters which make it difficult to identify. Henceforth present research work was carried out to delimit taxa within the same genus by morphological and palynological tools through light microscopy (LM) and scanning electron microscopy (SEM). Both these tools are considered as the most useful taxonomic characters for taxonomically problematic genera. The results showed a lot of variations among morphological characters. In Paspalum dilatatum, the upper glume was ovate whereas in the other two species, the upper glume was elliptic. The upper glume apex found in P. dilatatum and Paspalum scrobiculatum was obtuse whereas in Paspalum distichum, upper glume apex was acute. Glume nerves showed variation in all three species. Paspalum distichum was 3 nerved, P. scrobiculatum was 5–7 nerved, and P. dilatatum was 5–9 nerved. All three species showed variation in lemma nerves. Paspalum scrobiculatum had 3 nerved lemma whereas in P. distichum 3–5 nerved and P. dilatatum 5–9 nerved lemma were present. In polar and equatorial view, pollen grains ranged from 25 (20–30) to 37.5 (30–45) μm. Paspalum distichum appeared to be the smallest in size whereas P. dilatatum was the largest. Exine thickness ranged from 0.75 (0.5–1) to 1.35 (1.2–1.5) μm. The higher value of pollen fertility was found in P. scrobiculatum as 87.69% and the lowest value was in P. distichum as 78.08%. Morphological keys were also given for correct identification.     

Preparation of high pure α-Al2O3 nanoparticles at low temperatures using Pechini method

A Pechini process was successfully used to synthesize alpha-alumina (98.95% mass fraction) at relatively low calcination temperature (925 °C). The synthesis of these nanoparticles was carried out using a polymer prepared from citric acid and ethylene glycol by the melt blending method. This polymer worked as a chelating agent for aluminum cations. The final products were produced after a dual-stages thermal treatment. The resulting α-alumina consisted of nanoparticles of 8–16 nm in diameters with a surface area (～8 m² g^?1). The mass fraction of α-alumina was dependent on the concentration of aluminum salt and polymer precursor's solutions, while the surface area of the final product was dependent on the mass fraction of θ-alumina.     

Service based communication for MPSoC platform-SegBus

MPSoC platforms offer solutions to deal with communication limitations for multiple cores on single chip, but many new issues arise within the context. The SegBus platform is one of the solutions for application deployment on multi-core applications. There are many applications where identical data is transferred from the same source towards different destinations. Multicast services may come as a performance improving factor for the interconnection platform, together with interrupt service.In this paper, the task is to analyze, how different services can be designed for the SegBus platform and observe the improvement in system performance. The designer can select the services according to the requirements. The running example is represented by the H.264 encoder. The SegBus platform architecture, the communication mechanism, the allocation of processing elements on the platform, the communication services and their implementation are the main topics elaborated here.     

Microstructural evolution during friction surfacing of tool steel H13

Coatings of AISI H13 tool steel were made on low carbon steel by friction surfacing. Detailed microstructural studies and microhardness tests were carried out on the coatings. Studies revealed defect-free coatings and sound metallurgical bonding between the coating and the substrate. In addition, mechanical interlocking on a very fine scale was observed to occur between the coating and the substrate. Coatings exhibited martensitic microstructure with fine grain size and with no carbide particles. Coatings in as-deposited condition showed very high hardness (58 HRC) compared to the mechtrode material in annealed condition (20 HRC). Based on these findings, microstructural evolution during friction surfacing of H13 tool steel is discussed. The current work shows that friction surfaced tool steel coatings are suitable for use in as-deposited condition. Further improvements in coating microstructure and properties are possible with appropriate post-surfacing heat treatment.     

Stress Generated on Aluminum During Anodization as a Function of Current Density and pH

Anodic oxidation is accompanied by stressgeneration during the growth of the oxide. The presentstudy focuses on the stress-generation mechanism onaluminum as a function of the applied current density in acidic solutions of sulfuric acid ofdifferent strengths giving variable pH. Abeam-deflection technique was utilized for thedetermination of the magnitude and direction of stressesgenerated during the anodic oxidation process. Generally,thickness of the oxide determines whether the stress iscompressive or tensile in nature. The results have beeninterpreted in terms of the formation and annihilation of anion (O^2-) and cation(Al³⁺) vacancies. A reduction in thealuminum-ion vacancy concentration (V Al ³ ) results in a compressive stressdeflection, whereas tensile-stress deflection isintroduced by an increase in the oxygen vacancy(Vo²⁺) concentration. The mechanism isfurther elucidated by current-density jump/dropexperiments. The results show that stress in this caseis affected by the dissolution of the oxide at the oxide-electrolyteinterface.     

Doxorubicin-loaded cholic acid-polyethyleneimine micelles for targeted delivery of antitumor drugs: synthesis,characterization, and evaluation of their in vitro cytotoxicity

Doxorubicin-loaded micelles were prepared from a copolymer comprising cholic acid (CA) and polyethyleneimine (PEI) for the delivery of antitumor drugs. The CA-PEI copolymer was synthesized via pairing mediated by N,N’-dicyclohexylcarbodiimide and N-hydroxysuccinimide using dichloromethane as a solvent. Fourier transform infrared and nuclear magnetic resonance analyses were performed to verify the formation of an amide linkage between CA and PEI and doxorubicin localization into the copolymer. Dynamic light scattering and transmission electron microscopy studies revealed that the copolymer could self-assemble into micelles with a spherical morphology and an average diameter of <200 nm. The CA-PEI copolymer was also characterized by X-ray diffraction and differential scanning calorimetry. Doxorubicin-loaded micelles were prepared by dialysis method. A drug release study showed reduced drug release with escalating drug content. In a cytotoxicity assay using human colorectal adenocarcinoma (DLD-1) cells, the doxorubicin-loaded CA-PEI micelles exhibited better antitumor activity than that shown by doxorubicin. This is the first study on CA-PEI micelles as doxorubicin carriers, and this study demonstrated that they are promising candidates as carriers for sustained targeted antitumor drug delivery system.     

Low-Temperature Preparation and Magnetic Properties of V-Doped SnO2 Nanoparticles

A solid solution of vanadium (V)-doped tin oxide (SnO₂) particles of average diameter 2 nm and V content of 19 at.% was prepared at normal pressure and low temperature (100°C) by mixing wet SnO₂ gel SnO₂· x H₂O with a boiling solution of vanadium oxide (V₂O₅). Experimental characterizations using X-ray, electron diffraction, and transmission electron microscope show evidence of a pure single phase. The nanoparticles exhibit a mixed magnetic behavior, namely paramagnetic and ferromagnetic. Their thermal stability is also investigated. At higher temperature, 850°C, some amount of Fe precipitates from the solid solution.     

Potentiality of daylighting in a maritime desert climate: the Eastern coast of Saudi Arabia

Energy savings from the utilization of daylight will be influenced by the amount of external daylight incident on the external surface of the window plane. Therefore, savings from daylight will vary from a place to another, based on the prevailing sky conditions in the climate concerned. This paper aims to investigate the potentiality of natural light if used a source of internal illuminance in buildings in the Eastern coast of Saudi Arabia. This includes providing information about daylight performance in the area.