Nanomedicine-Based Delivery Strategies for Breast Cancer Treatment and Management

Breast cancer is one of the most common types of cancer among women globally. It is caused by mutations in the estrogen/progesterone receptors and conventional treatment methods are commonly utilized. About 70–80 percent of individuals with the early-stage non-metastatic disease may be cured. Conventional treatment is far less than the optimal ratio, as demonstrated through the high mortality rate of women with this cancer. However, conventional treatment methods like surgery, radiotherapy, and chemotherapy are not as effective as expected and lead to concerns about low bioavailability, low cellular uptake, emerging resistance, and adverse toxicities. A nanomedicine-based approach is a promising alternative for breast cancer treatment. The present era is witnessing rapid advancements in nanomedicine as a platform for investigating novel therapeutic applications and modern intelligent healthcare management strategies. This paper focuses on nanomedicine-based therapeutic interventions that are becoming more widely accepted for improving treatment effectiveness and reducing undesired side effects in breast cancer patients. By evaluating the state-of-the-art tools and taking the challenges involved into consideration, various aspects of the proposed nano-enabled therapeutic approaches have been discussed in this review.     

Steerable Microinvasive Probes for Localized Drug Delivery to Deep Tissue

Enhanced understanding of neuropathologies has created a need for more advanced tools. Current neural implants result in extensive glial scarring and are not able to highly localize drug delivery due to their size. Smaller implants reduce surgical trauma and improve spatial resolution, but such a reduction requires improvements in device design to enable accurate and chronic implantation in subcortical structures. Flexible needle steering techniques offer improved control over implant placement, but often require complex closed‐loop control for accurate implantation. This study reports the development of steerable microinvasive neural implants (S‐MINIs) constructed from borosilicate capillaries (OD = 60 µm, ID = 20 µm) that do not require closed‐loop guidance or guide tubes. S‐MINIs reduce glial scarring 3.5‐fold compared to prior implants. Bevel steered needles are utilized for open‐loop targeting of deep‐brain structures. This study demonstrates a sinusoidal relationship between implant bevel angle and the trajectory radius of curvature both in vitro and ex vivo. This relationship allows for bevel‐tipped capillaries to be steered to a target with an average error of 0.23 mm ± 0.19 without closed‐loop control. Polished microcapillaries present a new microinvasive tool for chronic, predictable targeting of pathophysiological structures without the need for closed‐loop feedback and complex imaging.     

Polyphenols of tea. IV.—Qualitative and quantitative study of the polyphenols of different organs and some cultivated varieties of tea plant

A method is described for the estimation of individual polyphenols of tea leaf. Polyphenols separated by two-way paper chromatography of a methanolic extract of the material were located under ultra-violet light. The excised spots were eluted with water and estimated from extinctions at 275 nm. Three of the polyphenols, (?)-epigallocatechin gallate, (?)-epigallocatechin and (?)-epicatechin gallate, which comprise 10-19% of the dry matter of tea shoots from Assam, are partly consumed during the manufacture of black tea. Seasonal variation in the polyphenolic content of some jats and clones grown in North East India are described. The phenolic content of the tea shoots was higher during rains. Changes in the phenolic pattern during the growth and development of tea flower, fruit and seed are described. Organs of tea, such as sepals, petals and pericarp with closer morphological affinities to the leaf, showed a greater degree of similarity in their phenolic pattern compared with other organs such as stigma, style, carpel, anther and testa. The gallates were mostly confined to the chlorophyll-bearing organs.     

Formation and Phase Behavior of Winsor Type III <Emphasis Type="Italic">Jatropha curcas</Emphasis>-Based Microemulsion Systems

The formation and phase behavior of Jatropha curcas-based microemulsion systems, which could potentially be used in enhanced oil recovery applications, has been investigated. Winsor type III microemulsions were obtained by adding n-octane to Winsor type I microemulsion systems prepared using various concentrations of alkyl polyglucoside (APG). To optimize the formulation of type III microemulsion systems, five different types of co-surfactants, i.e. normal butyl alcohol (NBA), isobutyl alcohol, isopropyl alcohol, fatty acid alcohol C8 (FAC8) and fatty acid alcohol C8/C10 (FAC8/C10) were used. The microemulsion phase behavior was determined along with particle size distributions by dynamic light scattering measurements. Results show that the optimum Winston type III system can be achieved by mixing 3 wt% of NBA, 1 wt% APG and 3 wt% NaCl. At the optimum formulation, the IFT reached a minimum value (0.016 mN/m) and formed very small emulsion droplets with a narrow particle size distribution.     

Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cement

Four calcium aluminate cement mixes were manufactured from aluminum sludge as a source of calcium oxide and Al₂O₃ and aluminum slag (dross) as a source of aluminum oxide with some additions of pure alumina. The mixes were composed of 35–50% aluminum sludge, 37.50–48.75% aluminum slag (dross) and 12.50–16.25% aluminum oxide. The mixed were processed then sintered at different firing temperatures up to 1500 °C or 1550 °C. The mineralogical compositions of the fired mixes investigated using X-ray diffraction indicated that the fired mixes composed of variable contents of calcium aluminate (CA), calciumdialuminate (CA₂), calciumhexaaluminate (CA₆) in addition to some content of magnesium aluminate spinel (MA). Sintering parameters (bulk density, apparent porosity and linear change) and mechanical properties (cold crushing strength) of the fired briquettes were tested at different firing temperature. Refractoriness of the cement samples manufactured at the optimum firing temperature was detected. Cementing properties (water of consistency, setting time and compressive strength as a function of curing time up to 28 days of hydration) of pasted prepared from the manufactured cement mixes at the selected optimum firing temperatures (1400 °C or 1500 °C) were also tested. Cement mixes manufactured from 45 to 50% aluminum sludge, 37.50–41.25% aluminum slag (dross) with 12.50–13.75% alumina were selected as the optimum mixes for manufacturing calcium aluminate cement since they satisfy the requirements of the international standard specifications regarding cementing and refractory properties as a result of their content of CA (the main hydraulic phase in calcium aluminate cement) and CA₂(the less hydraulic but more refractory phase). Although the recognized high refractoriness of CA₆, its formation affect badly the cementing properties of the other non-optimum mixes.     

Facile synthesis of novel optically active poly(amide‐imide)s containing N,N′‐(pyromellitoyl)‐bis‐l‐phenylalanine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) (1) was reacted with L‐phenylalanine (2) in a mixture of acetic acid and pyridine (3 : 2) at room temperature, then was refluxed at 90–100°C and N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid (3) was obtained in quantitative yield. The imide‐acid (3) was converted to N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) by reaction with thionyl chloride. Rapid and highly efficient synthesis of poly(amide‐imide)s (6a–f) was achieved under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of N,N′‐(Pyromellitoyl)‐bis‐L ‐phenylalanine diacid chloride (4) with six different derivatives of 5,5‐disubstituted hydantoin compounds (5a–f) in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. Suitable organic media was o‐cresol. The polycondensation proceeded rapidly, compared with the conventional melt polycondensation and solution polycondensation, and was almost completed within 10 min, giving a series of poly(amide‐imide)s with inherent viscosities about 0.28–0.44 dL/g. The resulting poly(amide‐imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(amide‐imide)s were investigated using thermal gravimetric analysis (TGA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 516–524, 2004     

Synthesis and properties of new thermally stable poly(amide-imide)s containing flexible ether moieties

Six new poly(amide-imide)s (PAIs) 8a-f were synthesized from the direct polycondensation reaction of 1,1-bis[4-(trimellitimido)phenoxy]methane 6 with various aromatic diamine 7a–f. The polymerization reactions produced a series of thermally stable and organosoluble PAIs with high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H-NMR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Also thermal properties of the PAIs 8a–f were investigated using thermal gravimetric analysis (TGA) and derivative of thermaogravimetric (DTG) analysis. dicarboxylic acid 6 was synthesized from the reaction of 1,1-bis[4-aminophenoxy]methane 4 with trimellitic anhydride 5 in a solution of glacial acetic acid/pyridine (Py) at refluxing temperature.     

Application of GA-Optimized ANNs to Predict the Water Content,CO2 and H2S Absorption Capacity of Diethanolamine (DEA) in Khangiran Gas Sweetening Plant

Theoretical Foundations of Chemical Engineering - In this work, with the aim of accurate prediction of water content, H2S and CO2 absorption capacity of diethanolamine (DEA) solvent in Khangiran...     

Synthesis and characterization of functionalized MWCNTs/PMMA composites: device fabrication for RH sensing

ABSTRACT

Functionalization of multiwalled carbon nanotubes (MWCNTs) with amine group using 4,4′-diaminodiphenyl sulfone (DDS) is achieved after carboxylation of pure MWCNTs (p-MWCNTs). p-MWCNTs, a-MWCNTs (acid functional MWCNTs) and f-MWCNTs (amine functional MWCNTs) were used to fabricate their nanocomposite with PMMA. A comparative study of the humidity characteristics of p-MWCNTs/PMMA, a-MWCNTs/PMMA and f-MWCNTs/PMMA-based capacitive humidity sensors was carried. f-MWCNTs/PMMA-based capacitive humidity sensor shows low hysteresis loss (5%), good response recovery behavior and highest sensitivity (S ~ 9736%) among all the studied composites. The maximum capacitance drift under different relative humidity was 1%RH.     

Carbon nanotubes‐filled thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

This article reports the preparation and characterization of multiwalled carbon nanotubes (MWCNTs)‐filled thermoplastic polyurethane–urea (TPUU) and carboxylated acrylonitrile butadiene rubber (XNBR) blend nanocomposites. The dispersion of the MWCNTs was carried out using a laboratory two roll mill. Three different loadings, that is, 1, 3, and 5 wt % of the MWCNTs were used. The electron microscopy image analysis proves that the MWCNTs are evenly dispersed along the shear flow direction. Through incorporation of the nanotubes in the blend, the tensile modulus was increased from 9.90 ± 0.5 to 45.30 ± 0.3 MPa, and the tensile strength at break was increased from 25.4 ± 2.5 to 33.0 ± 1.5 MPa. The wide angle X‐ray scattering result showed that the TPUU:XNBR blends were arranged in layered structures. These structures are formed through chemical reactions of ? NH group from urethane and urea with the carboxylic group on XNBR. Furthermore, even at a very low loading, the high degree of nanotubes dispersion results in a significant increase in the electrical percolation threshold. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40341.