A study of the corrosion properties of plasma nitrocarburized and oxidized AISI 1020 steels

Plasma nitrocarburized AISI 1020 steels were oxidized for 15, 30 and 60 min to evaluate their corrosion and microstructural properties. After plasma nitrocarburizing for 3 h at 570°C in a gas mixture comprising 85 vol.% N₂, 12vol.% H₂ and 3 vol.% CH₄, the compound layer composed of ɛ-Fe_2–3(N,C) and γ’-Fe₄(N,C) phases and the diffusion layer above the matrix were observed. The top oxide layer, consisting mainly of magnetite (Fe₂O₄) and hematite (Fe₂O₃) phases, forms after post-oxidation treatment at 500°C. However, the oxide layer was severely degraded by spallation as a result of increases in post-oxidizing time. The difference in corrosion resistance should be attributed to the thickness of the top oxide layer, which was governed by post-oxidizing time.     

Simulation of partial oxidation of natural gas to synthesis gas using ASPEN PLUS

Conversion of natural gas to liquid fuels is a challenging issue. In SMDS process natural gas is first partially oxidized with pure oxygen to synthesis gas (a mixture of H₂ and CO) which is then converted to high quality liquid transportation fuels by utilizing a modernized version of the Fischer-Tropsch reaction. This paper presents a computer simulation of the first stage of the process, i.e. the synthesis gas production from natural gas. ASPEN PLUS equipped with a combustion databank was used for calculations. Concentrations of over 30 combustion species and radicals expected in the synthesis gas have been calculated at equilibrium and several non-equilibrium conditions. Using a sensitivity analysis tool, the relative feed flow rates and reactor parameters have been varied searching to maximize the CO/O₂ yield as well as to minimize the undesired nitrogen compounds in the product stream. The optimum reactor temperature for maximizing the CO mole fraction in the synthesis gas was also calculated.     

Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. I: Effects of dilution,cooling rate,and nucleating agent addition on overall crystallization kinetics

The overall non-isothermal crystallization kinetics for nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane systems was investigated. Adipic acid was used as the nucleating agent. Crystallization peak temperature was determined via differential scanning calorimetry as a function of the experimentally controlled variables iPP concentration, cooling rate, and nucleating agent concentration. The influence of these variables on crystallization mechanism and spherulitic structure as implied by the Ozawa and Ziabicki analyses was determined. The non-isothermal crystallization kinetics presented here are the first for iPP-diluent systems with and without nucleating agent.     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Polydispersity effect on transient flow behavior of polystyrene solution

Summary The transient flow behavior of the binary blend of monodisperse polystyrene fractions is measured by a flow birefringence method. Both of the shear stress and first normal stress difference are obtained simultaneously in time by using a PMFB technique. The entanglements of the polymer chains significantly affect the rheological property of the binary blend in flow region. Especially, the entanglements of the high molecular weight fractions with themselves is proven to be the main source to the growth of first normal stress differences.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Permanent jet formation in beds of particulate solids

The simple criterion proposed by Chandnani and Epstein (1984, 1986) for stable spouting, d_or/d_p ≤ 25.4, is shown to give a good separation between gas-solid systems which form permanent jets and those that bubble, for a wide range of experimental data reported in the literature. The criterion is suggested as a necessary but not sufficient condition for permanent jet formation in fluidized, spout-fluid and spouted beds.     

Estimation of rheological parameters using velocity measurements

In the present investigation, we develop a method for estimating rheological parameters of viscoelastic fluids using velocity measurement in a square straight channel. It is believed that a somewhat complicated patterns of secondary flows due to the non-zero second normal stress difference are more useful than the simple viscometric flows traditionally adopted in the determination of rheological parameters. The inverse problem of determining the rheological parameters from a set of velocity measurements is solved using a conjugate gradient method. When applied to a general constitutive equation encompassing the UCM model, the Oldroyd-B model and the PTT model, the present method is found to yield a reasonably accurate estimation of five rheological parameters simultaneously even with noisy velocity measurements.     

New Process for the Preparation of Monodispersed, Spherical Silica Particles

A new method is presented for preparing highly monodispersed silica particles using a two-stage semibatch/batch hydrolysis reaction of Si(OC₂H₅)₄. The slower rate of hydrolysis of the tetraethylorthosilicate (TEOS) that occurred during the semibatch process resulted in larger silica particles with a higher yield and narrower size distribution. This was in direct contrast to the batch process. In addition, the ability of four different mixed processes to produce silica particles with good packing density, narrower particle-size distribution, and higher yield were evaluated. These were batch/batch (B-B), batch/semibatch (B-S), semibatch/batch (S-B), and semibatch/semibatch (S-S) processes. The S-S system produced the largest particles with the highest yields. The size of the silica particles obtained by the S-B method decreased with increasing reaction time, while the particles obtained by the B-S process had the best particle-size distribution and packing density. In conclusion, a mixed batch/semibatch system was the best way to produce an extremely narrow particle-size distribution and a good packing density.     

Oxidative stability of high-fatty acid rice bran oil at different stages of refining

The contents of natural antioxidants and the oxidative stability of rice bran oils at different refining steps were determined. Tocopherols and oryzanols were constant in crude and degummed oils but decreased in alkali-refined, bleached and deodorized oils. The process of degumming, alkali-refining, bleaching and deodorization removed 34% of the tocopherols and 51% of the oryzanols. During storage of deodorized oil for 7 wk, 34% of the tocopherols and 19% of the oryzanols were lost. The maximum weight gain, peroxide value and anisidine value were obtained from alkali-refined oil during storage. The order of oxidation stability was crude ≥ degummed > bleached = deodorized > alkali-refined oil.