Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

New Process for the Preparation of Monodispersed, Spherical Silica Particles

A new method is presented for preparing highly monodispersed silica particles using a two-stage semibatch/batch hydrolysis reaction of Si(OC₂H₅)₄. The slower rate of hydrolysis of the tetraethylorthosilicate (TEOS) that occurred during the semibatch process resulted in larger silica particles with a higher yield and narrower size distribution. This was in direct contrast to the batch process. In addition, the ability of four different mixed processes to produce silica particles with good packing density, narrower particle-size distribution, and higher yield were evaluated. These were batch/batch (B-B), batch/semibatch (B-S), semibatch/batch (S-B), and semibatch/semibatch (S-S) processes. The S-S system produced the largest particles with the highest yields. The size of the silica particles obtained by the S-B method decreased with increasing reaction time, while the particles obtained by the B-S process had the best particle-size distribution and packing density. In conclusion, a mixed batch/semibatch system was the best way to produce an extremely narrow particle-size distribution and a good packing density.     

The synergistic effect of boron nitride particle and die on the capillary extrusion processability of mLDPE

The synergistic effects of boron nitride (BN) powder and die on the rheology and processability of metallocene‐catalyzed low density polyethylene (mLDPE) were investigated. The processability in the extrusion process is closely related to the interfacial properties between the polymer melts and the die wall. BN powder was added to mLDPE to reduce the friction coefficient and surface energy. Adding 0.5 wt% BN powder to mLDPE was very effective in improving the processability and the extrudate appearance. To study the effect of die surface property, three different dies were applied in capillary extrusion. One was conventional tungsten carbide (TC) die, and the others were hot‐pressed BN (hpBN) die and hot‐pressed BN composite (hpBNC) die. The applications of these BN dies were quite effective in delaying surface melt fracture (sharkskin) and postponing gross melt fracture to higher shear rate compared to the TC die. These improvements result from the fact that BN dies reduce the wall shear stress significantly and promote slip. The synergistic effect of processability could be obtained when both BN powder and hpBN die were used together.     

Oxidative stability of high-fatty acid rice bran oil at different stages of refining

The contents of natural antioxidants and the oxidative stability of rice bran oils at different refining steps were determined. Tocopherols and oryzanols were constant in crude and degummed oils but decreased in alkali-refined, bleached and deodorized oils. The process of degumming, alkali-refining, bleaching and deodorization removed 34% of the tocopherols and 51% of the oryzanols. During storage of deodorized oil for 7 wk, 34% of the tocopherols and 19% of the oryzanols were lost. The maximum weight gain, peroxide value and anisidine value were obtained from alkali-refined oil during storage. The order of oxidation stability was crude ≥ degummed > bleached = deodorized > alkali-refined oil.     

NO emission of oxygen-enriched CH4/O2/N2 premixed flames under electric field

This work investigates the electric field effect on nitrogen oxide (NO) pollutant formation and emission composition of premixed flames in order to provide better insight on the mechanism of controlling the combustion process by electro-physical means. The present study aims to investigate experimentally the effect of radial DC electric field on premixed laminar methane flame. The electric field effect on flame shape, emission composition and NO emission index of flame is investigated experimentally under the action of direct-current electric field under varying equivalence ratio and level of oxygen enrichment. The results show that ionic wind effects cause the distortion in flame shape. The ionic wind effects diminish with increasing flow rate and level of oxygen enrichment. Minimal effects on NO are measured for flames under the influence of electric field and vanished as the level of oxygen enrichment is increased. This was well supported by the temperature profile measurement in the post flame gas showing no field-induced modification also. It seemed that the action of an electric field on a flame with a geometry that remains practically undeformed produces very minimal effect on pollutant emission.     

An apparent kinetic model for the carbonation of calcium oxide by carbon dioxide

For the apparent kinetics of the carbonation reaction of calcium oxide by carbon dioxide, as a kind of noncatalytic gas–solid reaction, a model equation has been proposed as follows: X=kbt/(b+t), where X is the conversion of CaO; k, a kinetic rate constant (time⁻¹); b, a constant (time) equivalent to the time taken to attain half the ultimate conversion of CaO, and t, the time. As a result of analyses for some literature-reported data of CaO-carbonation conversion, it has been found that the rate of the carbonation can be well represented by dX/dt=k(1−X/X_u)², where X_u is the ultimate conversion of CaO, which is given by the product of two parametric constants, k and b. The constants k and b in the two rate control regimes of CaO-carbonation, chemical reaction control and diffusion control, have been determined as functions of temperature, respectively. The activation energy in the carbonation of surface CaO with CO₂ is estimated to about 72 kJ/mol regardless of the sources of CaO, however, that in the diffusion control regime appears differently as 102.5 (mesoporous CaO) or 189.3 kJ/mol (commercial-available CaO), possibly due to the morphological differences of the two CaO samples. From a practical point of view, the simple model equation proposed in this study deserves attention in that the CaO-carbonation behavior at working temperatures higher than 700 °C could be closely predicted.     

Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

Statistical properties of interparticle/void distance for amorphous plastics toughening

Statistical properties of interparticle/void distance (ID) for various particle/void and dispersion types are studied in relation with toughening of plastics using computer‐generated three‐dimensional models. Particle/void size groups adopted were either of constant diameter or of log‐normal distribution. Particles/voids were dispersed at uniform‐random or flocculated with multiple clusters. It was found that IDs are (a) of approximately Gaussian distribution for particles/voids of either a constant diameter or a log‐normal distribution, when they are dispersed at uniform‐random, but (b) not of Gaussian distribution for particle/void sizes of bimodal log‐normal distribution, nor for flocculated log‐normal distribution of particles/voids dispersed with multiple clusters. It was also found that the degree of ID uniformity for a single group of log‐normally sized particles/voids is not sensitive to standard deviation of particle/void size. Mixing effect on ID properties using two groups of log‐normally distributed particles/voids with similar mean particle/void diameters was simulated. It was found that, when a significant amount (36 vol %) of particles/voids of a small mean and standard deviation of ID was mixed with a group of particles/voids of a large mean and standard deviation of ID, mean and standard deviation of ID for the mixture were not substantially lower than those of the group of particles/voids of the large mean and standard deviation of ID. It was also found that the degree of ID uniformity for the mixture of the two groups was lower than those of individual groups, indicating that the mixing has deleterious effect on toughening. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4256–4262, 2006