Ionic conductivity studies of poly(ethylene oxide)-lithium salt electrolytes in high-pressure carbon dioxide

We have measured ionic conductivity of PEO-LiX [anion X=N(CF₃SO₂)₂ (TFSI), ClO₄, CF₃SO₃, BF₄, NO₃, and CH₃SO₃] polymer electrolytes in CO₂ at pressures varied from 0.1 to 20 MPa. From the temperature dependence in supercritical CO₂, a large increase in the conductivity for PEO-LiBF₄ and LiCF₃SO₃ electrolytes has been observed. Permeation of the CO₂ molecules gave rise to the plasticization for crystal domains in the electrolytes, which is related to the reduction in transition point of the Arrhenius plot corresponding to the melting of crystal PEO. Relation between the conductivity and CO₂ reduced density revealed that the electrolytes containing fluorinated anions such as ‘CO₂-philic’ BF₄ and CF₃SO₃ increase in the conductivity with increasing the density. This indicates that the salt dissociation was promoted by the CO₂ permeation and the Lewis acid-base interactions between fluorinated anions and CO₂ molecules.     

Preparation of regioisomers of structured TAG consisting of one mole of CLA and two moles of caprylic acid

TAG (MLM) with medium-chain FA (MCFA) at the 1,3-positions and long-chain FA (LCFA) at the 2-position, and TAG (LMM) with LCFA at the 1(3)-position and MCFA at 2,3(1)-positions are a pair of TAG regioisomers. Large-scale preparation of the two TAG regioisomers was attempted. A commercially available FFA mixture (FFA-CLA) containing 9-cis, 11-trans (9c, 11t)- and 10t,12c-CLA was selected as LCFA, and caprylic acid (C₈FA) was selected as MCFA. The MLM isomer was synthesized by acidolysis of acyglycerols (AG) containing two CLA isomers with C₈FA: A mixture of AG-CLA/C₈ FA (1∶10, mol/mol) and 4 wt% immobilized Rhizomucor miehei lipase was agitated at 30°C for 72 h. The ratio of MLM to total AG was 51.1 wt%. Meanwhile, LMM isomer was synthesized by acidolysis of tricaprylin with FFA-CLA: A mixture of tricaprylin/FFA-CLA (1∶2, mol/mol) and 4 wt% immobilized R. miehei lipase was agitated at 30°C for 24 h. The ratio of LMM to total AG was 51.8 wt%. MLM and LMM were purified from 1,968 and 813 g reaction mixtures by stepwise short-path distillation, respectively. Consequently, MLM was purified to 92.3% with 49.1% recovery, and LMM was purified to 93.2% with 52.3% recovery. Regiospecific analyses of MLM and LMM indicated that the 2-positions of MLM and LMM were 95.1 mol% LCFA and 98.3 mol% C₈ FA, respectively. The results showed that a process comprising lipase reaction and short-path distillation is effective for large-scale preparation of high-purity regiospecific TAG isomers.     

High‐strength regenerated cellulose fibers spun from 1‐butyl‐3‐methylimidazolium chloride solutions

High‐performance regenerated cellulose fibers were prepared from cellulose/1‐butyl‐3‐methylimidazolium chloride (BMIMCl) solutions via dry‐jet wet spinning. The spinnability of the solution was initially evaluated using the maximum winding speed of the solution spinning line under various ambient temperatures and relative humidities in the air gap. The subsequent spinning trials were conducted under various air gap conditions in a water coagulation bath. It was found that low temperature and low relative humidity in the air gap were important to obtain fibers with high tensile strength at a high draw ratio. From a 10 wt % cellulose/BMIMCl solution, regenerated fibers with tensile strength up to 886 MPa were prepared below 22 °C and relative humidity of 50%. High strengthening was also strongly linked with the fixation effect on fibers during washing and drying processes. Furthermore, an effective attempt to prepare higher performance fibers was conducted from a higher polymer concentration solution using a high molecular weight dissolving pulp. Eventually, fibers with a tensile strength of ～1 GPa and Young's modulus over 35 GPa were prepared. These tensile properties were ranked at the highest level for regenerated cellulose fibers prepared by an ionic liquid–based process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45551.     

建筑—表现空中人体动态的诗意构成

作者认为,真文彦构筑建筑框架的前提是：他首先仔细考察并想象人们实际上会如何从视觉角度和动态角度去体验这座建筑。体验真文彦的建筑就是去接触在他的伤口中展现出来的那种独特的空间密度。接触在他的作品中展出出来的那种独特的空间密度。作者又以建于荷兰格罗宁根的漂浮建筑物,风的丘葬斋场和代官山集合住宅区第7期这三个项目来说明真文彦试图以一种非常个人化的方式来确定由这个时代的建筑所要求的空间的本质。     

Mechanism of elongation of gold or silver nanoparticles in silica by irradiation with swift heavy ions

It has been reported that elongated Au nanoparticles oriented parallel to one another can be synthesized in SiO₂ by ion irradiation. Our aim was to elucidate the mechanism of this elongation. We prepared Au and Ag nanoparticles with a diameter of 20 nm in an SiO₂ matrix. It was found that Au nanoparticles showed greater elongated with a higher flux of ion beam and with thicker SiO₂ films. In contrast, Ag nanoparticles split into two or more shorter nanorods aligned end to end in the direction parallel to the ion beam. These experimental results are discussed in the framework of a thermal spike model of Au and Ag nanorods embedded in SiO₂. The lattice temperature exceeds the melting temperatures of SiO₂, Au and Ag for 100 ns after one 110 MeV Br¹⁰⁺ ion has passed through the middle of an Au or Ag nanorod.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.     

Time-minimal paths amidst moving obstacles in three dimensions

A path-planning problem is considered in the presence of moving polygonal obstacles in three dimensions. A particle is to be moved from a given initial position to a destination position amidst polygonal disjoint barriers moving along known linear trajectories. The particle can move in any direction in space with a single constraint that it cannot move faster than a given speed bound. All obstacles are slowly moving, i.e., their speeds are strictly slower than the maximum speed of the particle. The destination point is also permitted to move along a known trajectory and is assumed to be collision-free at all times. Three properties are stated and proved for a time-minimal path amidst moving polygonal barriers. A few extensions are considered, including piecewise linear motions of the obstacles.     

Surgical significance of supernumerary parathyroid glands in renal hyperparathyroidism

In secondary hyperparathyroidism (2HPT) fundamentally all parathyroid glands, including supernumerary glands, become hyperplastic, and stimulation of parathyroid glands continues after parathyroidectomy (PTx). Therefore supernumerary glands have special significance during surgery for 2HPT, whether persistent or recurrent HPT. In the present study 570 patients underwent initial total PTx with a forearm autograft. The frequency, type, location, histopathology, and clinical significance of the supernumerary glands were evaluated. At the initial operation 90 supernumerary glands were removed from 82 to 570 patients (14.4%); 12 patients (2.1%) required extirpation of supernumerary glands for persistent/recurrent HPT. Altogether 104 supernumerary glands were identified at operation in 94 of the 570 patients (16.5%). Among these 104 glands, 25 (24.0%) were of the rudimentary, or split, type and 79 (76.0%) of the proper type. Supernumerary glands were most frequently identified in the thymic tongue (53/104, 51.0%); 32 (60.4%) of these 53 glands were identified only microscopically. In 6 of the 570 cases (1.1%), reoperation was required for persistent HPT due to supernumerary glands located in the mediastinum, and 6 patients underwent neck reexploration for recurrence. Histopathologically, 61 of 104 (58.7%) supernumerary glands, including 36 glands recognized only microscopically, showed diffuse hyperplasia, and 43 (41.3%) displayed nodular hyperplasia. Residual small supernumerary glands with diffuse hyperplasia have the potential to be transformed to nodular hyperplasia during long-term hemodialysis. Therefore all parathyroid glands including supernumerary glands should, if possible, be removed at the initial operation. Routine removal of the thymic tongue and careful examination of the regions surrounding the lower poles of the thyroid, especially on the left side, are important steps in the surgical treatment.     

Questionnaire of cryopreserved allograft valves in Kyushu and Yamaguchi area

Japanese Society of Cryopreserved Thoracic Tissue Implantation was recently set up. Cryopreserved allograft valves are about to pervade in Japan. To clarify the interest, demands and supply of cryopreserved allograft valve in the area of Kyushu and Yamaguchi, we performed questionnaire investigation regarding this issue. Collection rate of this questionnaire was 87.5% (35/40 hospitals). Ninety-seven percent of the hospitals answered that they were interested in cryopreserved allograft. Ninety-four percent of the hospitals answered that they did not ethically hesitate to use cryopreserved allograft. Ninety-one percent of the hospitals hoped to perform cardiac surgery using allograft aortic valve if allograft is available. With respect to securing donors of allograft, two-third of the hospitals did not decide whether they could be involved in obtaining donors of allograft. As the number of the cadaver kidney donors is about 20 per year in the area of Kyushu and Yamaguchi, shortage of donors of allograft valve is anticipated.     

Factors affecting the oxidative activity of laccase towards biphenyl derivatives in homogeneous aqueous-organic systems

Catalytic oxidation of biphenyl derivatives was investigated using laccase in a homogeneous aqueous-organic system. A thermostable laccase from Trametes sp. showed the highest catalytic activity for the oxidation of 4-hydroxybiphenyl (4-HB) at a reaction temperature of 60 degrees C when dimethylsulfoxide (DMSO) was employed as a co-solvent. Furthermore, the catalytic performance was successfully enhanced by the incorporation of a laccase mediator system (LMS) into the aqueous-DMSO media. The catalytic performance strongly depended on the type of mediator, and the highest activity was observed with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as mediator, suggesting the importance of the selection of a suitable mediator. It was verified that this mediator system is applicable to the oxidation of several biphenyl derivatives with hydroxyl groups.