Quasi-cyclic LDPC codes for fast encoding

In this correspondence we present a special class of quasi-cyclic low-density parity-check (QC-LDPC) codes, called block-type LDPC (B-LDPC) codes, which have an efficient encoding algorithm due to the simple structure of their parity-check matrices. Since the parity-check matrix of a QC-LDPC code consists of circulant permutation matrices or the zero matrix, the required memory for storing it can be significantly reduced, as compared with randomly constructed LDPC codes. We show that the girth of a QC-LDPC code is upper-bounded by a certain number which is determined by the positions of circulant permutation matrices. The B-LDPC codes are constructed as irregular QC-LDPC codes with parity-check matrices of an almost lower triangular form so that they have an efficient encoding algorithm, good noise threshold, and low error floor. Their encoding complexity is linearly scaled regardless of the size of circulant permutation matrices.     

Stable single-frequency fiber ring laser for 25-GHz ITU-T grids utilizing saturable absorber filter

A stable single-frequency fiber ring laser is proposed that operates in a single mode for more than an hour by incorporating unpumped erbium-doped fiber (EDF) as a saturable absorber filter and optimizing the length of EDF used as gain medium. This laser can be continuously tuned to 25-GHz spacing that precisely matches the ITU-T grids by temperature control of etalon filter. This laser had a signal-to-source spontaneous emission ratio higher than 70 dB, and lasing frequencies of 361 channels was matched to ITU-T grids with excellent flatness. Frequency offset from the ITU-T grid was less than 0.14 GHz. The linewidth and the relative intensity noise value was less than 1.3 kHz and 130 dB/Hz (above 250 kHz), respectively.     

Effects on signal integrity and radiated emission by split reference plane on high-speed multilayer printed circuit boards

Power/ground partitioning has been used to supply multivoltage levels and to isolate power/ground noise in high-speed multilayer printed circuit boards. However, the partitioning of the power/ground plane breaks the current return path of the signal current through either the power plane or the ground plane, which causes undesired effects such as signal distortion, crosstalk, and radiation. To control and suppress these undesired effects, we should understand the electromagnetic mechanism associated with them. In this paper, the mechanism of the reflection and the transmission of the signal by the slotted power/ground plane is well understood through an analysis of measurements based on time-domain reflectometry. Considering the propagation of a slot wave through the slot line on the power/ground plane, we have successfully explained the changes of the transmitted and reflected waveforms. Furthermore, we have numerically and experimentally investigated the effects of the power/ground partitioning on the radiated emission in various structures. Finally, it is confirmed that the employment of a stitching capacitor on the power/ground slot suppresses the signal distortion and the radiated emission significantly. When the size and the location of the stitching capacitor are designed, there should be a compromise between the noise isolation and the guarantee of the return current path, with considering the resonance frequencies of planes by the capacitor.     

CPW bandstop filter using slot-type SRRs

The bandstop characteristic of a slot-type split-ring resonator (SRR) on a substrate used for microwave frequencies is presented for a bandstop filter. Analogously to the conventional strip-type SRR, the slot-type SRR is very attractive for notching unwanted band because of its small dimension and high Q operation. In addition, the complementary SRR can be easily applied for coplanar configuration, which is favourable to MMIC designs. Based on the simulation and measurement results, the slot-type SRR for the bandstop filter is very effective in rejecting unwanted frequency in terms of its selectivity and size.     

Use and Disuse of Contextual Primes in Dynamic News Environments

This study reexamines the news priming effects of the 1991 Persian Gulf War. Suggesting an alternative approach to those used in previous studies, this study assesses individuals' use and disuse of a contextual prime (i.e., the air war) in dynamic news environments. With a short-term, quasi-experimental approach considering the air war as a prime stimulus, a path analysis suggests robust evidence of the short-term accessibility effects of priming. More importantly, as suggested in Martin's (1986) set/reset model, this study extends priming effects beyond the simple hydraulic patterns of accessibility effects. It reveals that both attitudes toward military action and attitudes toward a diplomatic solution were used in subsequent judgments of the president's job performance and handling of the war. The associations between attitudes toward a diplomatic solution and subsequent judgments were even stronger than those between attitudes toward military action and the same subsequent judgments, despite the clear prowar primes of news discourse in the air-war context. This pattern was more greatly intensified among those in the high news attention group than those in the low news attention group     

Suppression of transient phenomena in hybrid Raman/EDF amplifier

Transient phenomena of hybrid Raman/erbium-doped fiber amplifier (EDFA) upon optical channel add-drop are investigated. The transient responses of surviving channels are resulted from the combined dynamics of Raman amplifier and EDFA. It is shown that the suggested method employing fast gain control of EDFA only can effectively suppress the transient variation of output power. The transient-suppressing hybrid Raman/EDFA is proven to be enough for wavelength-division-multiplexing networks including reconfigurable optical add-drop multiplexer and/or transparent optical cross-connect, if the optical switching speed is carefully chosen.     

Crosstalk reduction in mixed-signal 3-D integrated circuits with interdevice layer ground planes

We show nearly 8 dB of crosstalk reduction using ground planes between active device layers in three-dimensional (3-D) integrated circuits. Our experimental work utilizes two planes of MOS transistors with tungsten or polysilicon ground planes designed to attenuate crosstalk. Theoretical simulations, using an electromagnetic solver, and the experimental results are consistent with analytical results. The key result verified is that a ground plane, whose footprint shadows the device area, is sufficiently large for effective attenuation. The interdevice layer ground plane provides an effective means to achieve crosstalk reduction in 3-D mixed-signal/RF integration because of simple fabrication and high coupling isolation.     

Point Defects in Pb-, Bi-, and In-Doped CdZnTe Detectors: Deep-Level Transient Spectroscopy (DLTS) Measurements

We studied, by current deep-level transient spectroscopy (I-DLTS), point defects induced in CdZnTe detectors by three dopants: Pb, Bi, and In. Pb-doped CdZnTe detectors have a new acceptor trap at around 0.48?eV. The absence of a V_Cd trap suggests that all Cd vacancies are compensated by Pb interstitials after they form a deep-acceptor complex [[Pb_Cd]⁺-V _Cd ^2? ]^?. Bi-doped CdZnTe detectors had two distinct traps: a shallow trap at around 36?meV and a deep donor trap at around 0.82?eV. In detectors doped with In, we noted three well-known traps: two acceptor levels at around 0.18?eV (A-centers) and 0.31?eV (V_Cd), and a deep trap at around 1.1?eV.     

Maximum Power Point Tracking Controller for Thermoelectric Generators with Peak Gain Control of Boost DC–DC Converters

An analog maximum power point tracking (MPPT) circuit for a thermoelectric generator (TEG) is proposed. We show that the peak point of the voltage conversion gain of a boost DC?CDC converter with an input voltage source having an internal resistor is the maximum power point of the TEG. The key characteristic of the proposed MPPT controller is that the duty ratio of the input clock pulse to the boost DC?CDC converter shifts toward the maximum power point of the TEG by seeking the peak gain point of the boost DC?CDC converters. The proposed MPPT technique provides a simple and useful analog MPPT solution, without employing digital microcontroller units.     

Doping Effects on Thermoelectric Properties in the Mg2Sn System

A weak point of Mg₂X thermoelectrics is the absence of a p-type composition, which motivates research into the Mg₂Sn system. Mg₂Sn thermoelectrics were fabricated by a vacuum melting method and a spark plasma sintering process. As a result, Mg₂Sn single phases were acquired in a wide range of Mg-to-Sn atomic ratios (67:33 to 71:29), showing slightly different thermoelectric characteristics. However, the thermoelectric properties of the undoped system were not sufficient for application in commercial production. To maximize the p-type characteristics, many atoms [Ni (VIIIA), Cu (IB), Ag (IB), Zn (IIB), and In (IIIB)] were doped into the Mg₂Sn phase. Among them, the power factor values increased only in the Ag-doped case. Ag-doping resulted in a power factor that was more than 10 times larger than the value in the undoped case. This result could be important for developing p-type polycrystalline thermoelectrics in the Mg₂X (X?=?Si, Sn) system. However, other atoms [Ni (VIIIA), Cu (IB), Zn (IIB), and In (IIIB)] were not determined to act as acceptor atoms. The maximum ZT value for the Ag-doped Mg₂Sn thermoelectric was more than 0.18, which is comparable to the value for the n-type Mg₂Si system.