EMC VSPEX架构如何应对中国用户对架构的需求

在2013年,中桥国际调研咨询在中国IT市场共进行了三次大型的调研,主题涉及虚拟化、云计算、大数据、融合架构等。在这里,中桥国际调研咨询总经理兼首席分析师Kim Wang将结合中国市场的调研数据,以及此次EMC在意大利米兰发布的一系列存储、网络和架构新品,来分析中国市场的技术趋势。     

Analysis of underwater thruster model with ambient flow velocity using CFD

Thrust force is a very important factor for underwater vehicles. The thrust force that is determined by the pressure gradient between a propeller and a thruster can be represented by the ambient flow velocity introduced as the control volume and the axial flow velocity of a propeller. Because a change in ambient flow velocity triggers a change in the pressure gradient between a propeller and a thruster, a model taking account of the ambient flow velocity is required for an unmanned underwater vehicle (UUV) system. However, the axial flow velocity introduced into a propeller is very difficult to measure without accurate test devices. Therefore, in this study, the axial flow velocity is calculated with the computational fluid dynamics (CFD) method to use it as a basis for estimating the approximate value of the thrust force. As a result, a relatively accurate analysis of the effect of the ambient flow velocity on the thrust force can be obtained with considerable time and cost effectiveness as compared to the existing experimental methods. To evaluate the validity of the data from the CFD analysis results depending on the change in ambient flow velocity and the pressure gradient of a thruster, the resulting CFD values were compared with the thrust forces obtained in the previously performed thrust force experiment of a thruster depending on the ambient flow velocity in a circulating water channel.     

Ultra-low noise single-photon detector based on Si avalanche photodiode

We report operation and characterization of a lab-assembled single-photon detector based on commercial silicon avalanche photodiodes (PerkinElmer C30902SH, C30921SH). Dark count rate as low as 5 Hz was achieved by cooling the photodiodes down to -80 °C. While afterpulsing increased as the photodiode temperature was decreased, total afterpulse probability did not become significant due to detector's relatively long deadtime in a passively-quenched scheme. We measured photon detection efficiency >50% at 806 nm.     

Suppressing harmonic vibrations of a miniature cryogenic cooler using an adaptive tunable vibration absorber based on magneto-rheological elastomers

This paper presents dynamic performances of an adaptive tunable vibration absorber (TVA) designed to suppress the main harmonic disturbance of a miniature linear cryogenic cooler, which is being used in space applications such as an observation satellite. The adaptive TVA employs a magneto-rheological elastomer (MRE) for a variable stiffness element. This study first investigates the shear modulus change of MRE samples with respect to the magnetic flux density, which varies through the alignment of particle chains. The MRE with the maximal shear modulus change is mounted for the TVA on a prototype cooler, which emulates the characteristics of a miniature cryogenic cooler. Using the test setup, a series of vibration tests are performed to evaluate the performance and efficacy of the MRE TVA and its re-tuning ability. The experimental results show that the MRE TVA is able to robustly suppress the vibration of the cooler even when the frequency of resonant vibration is changed up to 87% from its initial frequency.     

Note: High speed optical profiler based on a phase-shifting technique using frequency-scanning lasers

We present a high speed optical profiler (HSOP) using frequency-scanning lasers for three-dimensional profile measurements of microscopic structures. To improve upon previous techniques for implementing the HSOP, we developed frequency-scanning lasers and a compact microscopic interferometer. The controller of the HSOP was also modified to generate proper phase-shifting steps. For measurements of step height specimens, the HSOP showed results comparable with a commercial optical profiler, even with much higher measurement speeds (up to 30 Hz). The typical repeatability of step height measurement was less than 1 nm. We also present measurements of microscopic structures to verify the HSOP's ability to perform high speed inline inspection for the semiconductor and flat-panel display industries.     

Note: Interpolation for evaluation of a two-dimensional spatial profile of plasma densities at low gas pressures

An interpolation algorithm for the evaluation of the spatial profile of plasma densities in a cylindrical reactor was developed for low gas pressures. The algorithm is based on a collisionless two-dimensional fluid model. Contrary to the collisional case, i.e., diffusion fluid model, the fitting algorithm depends on the aspect ratio of the cylindrical reactor. The spatial density profile of the collisionless fitting algorithm is presented in two-dimensional images and compared with the results of the diffusion fluid model.     

Ultrastructural investigation of intact orbital implant surfaces using atomic force microscopy

This study examined the surface nanostructures of three orbital implants: nonporous poly(methyl methacrylate) (PMMA), porous aluminum oxide and porous polyethylene. The morphological characteristics of the orbital implants surfaces were observed by atomic force microscopy (AFM). The AFM topography, phase shift and deflection images of the intact implant samples were obtained. The surface of the nonporous PMMA implant showed severe scratches and debris. The surface of the aluminum oxide implant showed a porous structure with varying densities and sizes. The PMMA implant showed nodule nanostructures, 215.56 ± 52.34 nm in size, and the aluminum oxide implant showed crystal structures, 730.22 ± 341.02 nm in size. The nonporous PMMA implant showed the lowest roughness compared with other implant biomaterials, followed by the porous aluminum oxide implant. The porous polyethylene implant showed the highest roughness and severe surface irregularities. Overall, the surface roughness of orbital implants might be associated with the rate of complications and cell adhesion. SCANNING 33: 211–221, 2011. © 2011 Wiley Periodicals, Inc.     

Usability Principles for Augmented Reality Applications in a Smartphone Environment

Through the rapid spread of smartphones, users have access to many types of applications similar to those on desktop computer systems. Smartphone applications using augmented reality (AR) technology make use of users' location information. As AR applications will require new evaluation methods, improved usability and user convenience should be developed. The purpose of the current study is to develop usability principles for the development and evaluation of smartphone applications using AR technology. We develop usability principles for smartphone AR applications by analyzing existing research about heuristic evaluation methods, design principles for AR systems, guidelines for handheld mobile device interfaces, and usability principles for the tangible user interface. We conducted a heuristic evaluation for three popularly used smartphone AR applications to identify usability problems. We suggested new design guidelines to solve the identified problems. Then, we developed an improved AR application prototype of an Android-based smartphone, which later was conducted a usability testing to validate the effects of usability principles.     

Performance Comparisons Between Thumb-Based and Finger-Based Input on a Small Touch-Screen Under Realistic Variability

The potential benefits of thumb-based touch interaction have not been fully exploited due to its usability problems and performance deterioration. Despite the well-known problems, mobile phone users often prefer thumb-based input method in their daily context of use. Without understanding input performance under realistic variability, design solutions may not address the problems adequately. This research aims to evaluate performance of one-handed thumb-based input compared to cradled finger-based input for the large number of users and varying task conditions. By investigating performance under a range of user- and task-variability, common patterns can be identified to help infer realistic performance in context of use. For this experiment, 259 participants were recruited balanced on gender and age. They performed user testing of moving an icon on a mobile touch-screen. Overall, the one-handed thumb input showed a 30% reduction in throughput compared to the cradled finger-based input, with significant reduction in speed and accuracy. Reduced throughput is attributed to inaccuracy rather than speed. In addition, the partial effects of touch position, dragging direction, and target size were investigated and quantified. In conclusion, performance could maintain constant throughput only for the finger-based input of limited task conditions, when realistic variability was introduced. Also, high variance of throughput for the thumb-based input led to poor conformity to Fitts’s law. The findings have implications for design of thumb-based touch interface to offset performance reduction and characterizing performance measure for thumb-based input method.     

Paternal and Maternal Information and Communication Technology Usage as Their Very Low Birth Weight Infants Transition Home From the NICU

Little is known about how differently mothers and fathers of very low birth weight (VLBW) infants use information and communication technology (ICT), especially during the vulnerable transition from the neonatal intensive care unit (NICU) to home. This study aims to qualitatively compare and contrast the two groups’ usage of technology. In-depth, semistructured phone interviews were conducted with 25 parents of 16 VLBW infants who had been hospitalized in the NICU. Grounded theory facilitated the understanding of interview data. This article discusses the patterns that emerged around the use of ICT between the two groups and discusses the implications for health information seeking, privacy and misinformation, online social networking, learning technology, choosing a health care provider, and health care communication.