Lifetime Measurements on a High-Reliability RF-MEMS Contact Switch

Radio frequency microelectromechanical systems (RF MEMS) cantilever contact switches have been tested for lifetime. The mean cycles-to-failure measured on an ensemble of switches was 430 billion switch cycles. The longest lifetime exhibited without degradation of the switch was 914 billion switch cycles. The devices were switched at 20 kHz with an incident RF frequency of 10 GHz and an incident RF power of 20 dBm. Testing was performed continuously over a period of approximately 18 months. The switches were operated in a cold-switched mode.     

MTCLAB: A MATLAB®-based program for traveltime quality analysis and pre-inversion velocity tuning in 2D transmission tomography

A MATLAB^®-based computer code that analyses the traveltime distribution and performs quality analysis at the pre-inversion stage for 2D transmission experiments is presented. The core tools of this approach are the so-called mean traveltime curves. For any general recording geometry, the user may select any pair of subsets of contiguous sources and receivers. The portion of the domain swept by the implied rays defines a zone of analysis, and for each source (receiver) the outcoming (incoming) ray fan is named a source (receiver) gather. The empirical mean traveltime curves are constructed, for each zone, by assigning the average and the standard deviation of the traveltimes in the gathers to the positions of the sources (receivers).The theoretical expressions assume isotropic homogeneous velocity inside each zone. The empirical counterparts use the observed traveltimes and make no assumptions. Isotropic velocity in each zone is inferred by least-squares fitting of the empirical mean traveltime curves. The user may refine the analysis considering different zones (multi-zone analysis). Initially the whole domain is modelled as a single zone. The procedure compares empirical versus theoretical curves. In addition, residuals can be plotted using source–receiver positions as plane coordinates. The results are used to unravel the possible presence of anomalous gathers, heterogeneities, anisotropies, etc. Depending on the kind of anomalies, velocity estimation and mean time residuals are different in the source and receiver gather curves.This software helps to grasp a better understanding of the data variability before the inversion and provides to the geophysicist an approximate zonal isotropic model and a range of velocity variation that can be used in the inverse problem as a priori information (regularization term). Its use is described through tutorial examples. A guided user interface leads the user through the algorithm steps.     

Balance-dendrogram. A new routine of CoDaPack

A statistical analysis of compositional data based on the Aitchison geometry of the simplex requires an appropriate basis for representing the data. A simple and intuitive way of building such a basis employs a sequential binary partition of the compositional vector. The partition, together with some statistical summaries of the coordinates, or balances, can be represented in a dendrogram-type graph. In this paper we introduce an implementation of this methodology inside CoDaPack, which is freeware. An example with real data illustrates the use of the Balance-Dendrogram routine.     

Characterizing navigation maps for web applications with the NMM approach

This paper presents the Navigation Maps Modeling approach (NMM), which provides platform independent models for characterizing navigation maps of web applications. The NMM approach is conceived to obtain a trade off between high and low-level design notations. As high-level design notations, NMM models permit architectural details that may hinder the overall understanding of the web application to be left out. As low-level design notations, NMM models can easily be transformed into detailed architectural designs, which are very valuable at coding and maintenance stages.     

An Investigation of the Reduction and Reoxidation of Isolated Vanadate Sites Supported on MCM-48

The reduction and subsequent reoxidation of isolated vanadate species supported on silica was investigated using temperature-programmed reduction and oxidation, along with in-situ XANES and Raman spectroscopy. Approximately 70–80% of the vanadium was reduced to V³⁺ after reduction in H₂ at temperatures up to 923 K. Upon reduction, the vanadyl oxygen was removed and the three remaining V–O bonds are lengthened by 0.2 Å. The vanadate species are rapidly reoxidized when exposed to O₂, with the amount of oxygen uptake matching well with the amount removed during reduction. In-situ Raman spectroscopy during reoxidation in ¹⁸O₂ showed that significant scrambling occurs between gas phase oxygen and surface oxygen species during the reoxidation of the vanadate species.     

Estimating thermal stress in BIPV modules

The thermal stress on building‐integrated photovoltaic modules (BIPV) in Espoo, Finland, was studied with field‐testing of amorphous silicon modules. Based on these results, the thermal stress at two other European locations (Paris and Lisbon) was estimated. The estimation procedure entailed thermal modelling of heat transfer in the façade with meteorological data as input. The results indicate that the thermal stress on BIPV modules in Lisbon is, in this case, approximately 50% higher that in Espoo and between 80 and 200% higher than in Paris, depending on the activation energy of the degradation process. The difference in stress between a BIPV module and a free‐standing module in Espoo was 50–200%. Copyright © 2006 John Wiley & Sons, Ltd.     

Fractures of Structural Steels (Part 2)

Fractures of group II (according to the classification given in Part 1) are described in detail. The deviations of the structure of a fracture from the groups of fiber and crystalline fractures are explained by the chemical micro- and macroinhomogeneity of the metal. The characteristics of fractures, the causes of their formation, the methods for fighting and eliminating them, and the interrelation with the mechanical properties of the steel are described. Every kind of fracture is illustrated.     

The dermorphin peptide family

1. In 1980, the skin of certain frogs belonging to the genus Phyllomedusinae was found to contain two new peptides that proved to be selective mu-opioid agonists. Given the name dermorphins, these were the first members of a peptide family that in the past 15 years has grown to reach a total of seven naturally occurring peptides and nearly 30 synthetic analogs. 2. Dermorphin peptides are potent analgesics in rodents and primates, including man. Some dermorphins can enter the blood-brain barrier and produce central antinociception after peripheral administration. 3. The dermorphin family also includes mu 1-opioid receptor selective agonists that produce intense opioid analgesia, but stimulate pulmonary ventilation. 4. Experiments in rats and mice chronically exposed to dermorphins have shown that not only do they have higher antinociceptive efficacy and potency than morphine, but they are also less likely than morphine to produce tolerance, dependence and opiate side effects.     

Screening for hepatitis C of hospital personnel at the Szent László Hospital of Budapest

The health-care workers are known to be at risk of occupational transmission of blood-borne viruses. The goal of the investigation was to determine the prevalence of hepatitis C virus (HCV) antibody and the occupational risk of HCV transmission among personnel at the Central. Hospital for Infectious Diseases, Budapest, Hungary. Serum samples of 409 health-care workers were tested for antibody to HCV with second and third generation ELISA-s and anti-HCV positive samples were confirmed with Western Blot Line EIA. A total of 10 (2.4%) of the health-care workers were confirmed to be anti-HCV positive. The prevalence of anti-HCV increased with advancing age: zero under 20 yr age group (N = 0/15), 0.9% in 21-30 yr age group (N = 1/112), 1.8% in 31-40 yr age group (N = 2/111), 3.1% in 41-50 yr age group (N = 3/96) and 4.0% in above 50 yr age group (N = 3/75). We found anti-HCV positive hospital worker in 9 out of 17 departments. The prevalence of hepatitis C antibody was 7.1-1.9% among the personnel of internal departments, pathology, intensive care unit and pediatric departments. No anti-HCV positive health-care worker was found in the surgery and laboratories. None of the physicians tested was seropositive for HCV. Eight of the nurses, one of the sanitary personnel and one pathological technician were seropositive for HCV. Two nurses developed a chronic C hepatitis after a needlestick accident. CONCLUSIONS: 1. The hospital personnel is at risk for HCV infection. 2. The occupational risk of HCV infection increases with age but the risk is considerable lower than that of hepatitis B infection. 3. The occupational risk is highest among the workers of the chronic internal department, pathology and intensive care unit. 4. The nurses are at higher risk of HCV infection than the physicians. 5. The needlestick injury is associated with an increased risk for acquiring HCV infection.