Tree model based eco-climatic vegetation classification and fuzzy mapping in diverse tropical deciduous ecosystems using multi-season NDVI

Many vegetation classification strategies in tropical ecosystems involving conventional image processing of original satellite imagery bands require considerable prior site knowledge, statistical assumptions, and are difficult, expensive and inconsistent. In this paper we show that the intra-annual variation and rates of change in NDVI for different parts of a large forest area in combination with rules derived from a tree model can be used for detailed vegetation mapping. We used three-date NDVI data for the Biligiri Rangaswamy Temple Wildlife Sanctuary in Karnataka, southern India comprising mean NDVI, coefficient of variation (CV) and two NDVI change vectors corresponding to intraseasonal NDVI differences. A rule-based classification using a tree model was developed at two levels. The overall kappa statistic is 0.61 at level 1 classification, indicating a strong correspondence with the raster version of the available vector reference map based on ground data, even though the two maps are not strictly comparable. Several limitations of the available reference map have been highlighted by the new technique, especially the absence of ecotones. At level two the tree model map has provided detailed classification of dry deciduous forests and new classes not available in the reference map. The method in combination with reference data also provides a framework for fuzzy classification. This technique offers a relatively simple cost-effective alternative to existing classification strategies, especially for areas with diverse evergreen and deciduous vegetation elements.     

Third-order optical nonlinear studies of Cobalt (II) Schiff base complex bearing triphenylphosphine using Differential Optical Kerr Gate and Z-scan studies

The third-order optical nonlinearity of the composite film of coordination complex [CoLPPh₃Cl] (L = N-(2-pyridyl)-N′-(salicylidene)hydrazine) and PMMA has been investigated by using Differential Optical Kerr Gate (DOKG) and Z-scan measurements. Large value of the third-order nonlinear optical susceptibility (χ⁽³⁾) of the order of 10^?10 esu was measured and its nonlinear response time was found to be faster than or comparable to the laser pulse width (90 fs) used. The single beam Z-scan technique was used to investigate the nonlinear absorption property of the composite near 800 nm. The sample exhibit saturable absorption. The nonlinear absorption coefficient of sample is found to be ?32 cm/GW.     

Synthesis,structure and characterization of ceramic Ca4Bi2Ti4Nb6O30

The polycrystalline samples of Ca₄Bi₂Ti₄Nb₆O₃₀ (herein designated CBTN) were synthesized by the conventional ceramic method. Preliminary X-ray structural study of the compound showed the formation of a single phase solid solution having orthorhombic structure in the paraelectric phase. Measurements of the dielectric constant (ε) and dielectric loss (tan δ) as a function of temperature (−180–200°C) at 1 kHz and 10 kHz and also as a function of frequency (10² Hz to 10⁴ Hz) at five different temperatures [−180°C, −40°C, − 10°C 26°C (room temperature) and 75°C] have shown a dielectric anomaly and a phase transition at − 13 ±1°C in CBTN.     

Textural and microstructural developments during fabrication of Zr-2.5Nb pressure tubes

Zr-2.5wt%Nb pressure tubes, as used in the Indian pressurized heavy water reactors (PHWR), are fabricated through a combination of hot extrusion followed by two stages of cold pilgering and annealing. The present study makes an effort to systematically characterize the textural changes during the fabrication stages. The starting single-phase hcp martensitic structure was textured to start with and it also went through strong texture developments during hot extrusion. First and especially the second pilgering modified the texture. Such modifications were related to local discontinuity of the softer second phase, as an apparent continuity restricted lattice rotation in the primary hcp phase. Annealing caused discontinuity or spherodization of the bcc phase, but did not create recrystallization in the hcp matrix. The combination of two pilgering plus annealing operations, though the latter did not cause noticeable texture changes, however, reverted the final texture close to the parent hot-extruded texture.     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

The HLD Study of Surfactant Partitioning for Oilfield Corrosion Inhibitors

The partitioning of corrosion inhibitor (CI) products is a measure of their potential to protect oilfield pipelines. In this paper the hydrophilic–lipophilic deviation (HLD) model is first used to quantify their partitioning in terms of the characteristic curvature (C _c,act) of a series of anionic (alkoxylated phosphate esters) and cationic (alkoxylated amines, aromatic amines, imidazoline acetates and quaternary amines) actives. This parameter is expressed over a range of pHs within which pipeline corrosion occurs. The HLD model is next used to predict the partitioning of each active from water into toluene at increased salinities. Linear mixing rules are lastly used to predict the characteristic curvature of Product A (C _c,mix) as a function of the C _c,act of a subset of actives.     

Lactobionic Acid as a New Synergist in Combination with Phosphonate-Zn(Ⅱ)System for Corrosion Inhibition of Carbon Steel

Studies on lactobionic acid introduced as a synergist in the presence of phosphonobutane-1,2,4-tricarboxylic acid(PBTC) and zinc ions for corrosion control of carbon steel in aqueous environment are presented.The investigations revealed that lactobionic acid(LBA) acts as an excellent synergist in corrosion inhibition.Optimum concentrations of all the three components of the ternary formulation are established by gravimetric studies.Potentiodynamic polarization studies indicate that the new ternary system is a mixed inhibitor.Impedance studies show that a protective film is formed on the metal surface in the presence of the inhibitor formulation.The film is found to exhibit its protective nature even at higher temperatures up to 60 °C.Analysis of the protective film by X-ray photoelectron spectroscopy(XPS) and reflection absorption Fourier transform infrared(FTIR) spectroscopy infers the presence of Zn(OH)_2,oxides and hydroxides of iron and the inhibitor molecules in the surface film probably in the form of a complex,[Zn(ll)—PBTC—LBA].The morphological studies by scanning electron microscopy(SEM) and the topographical studies by atomic force microscopy(AFM) also indicate the presence of protective film on the metal surface.A plausible mechanism of corrosion inhibition is proposed.     

Gurson model parameters for ductile fracture simulation in ASTM A992 steels

This study is concerned with the modelling the ductile fracture in ASTM A992 steels using the Gurson‐Tvergaard‐Needleman (GTN) model for high stress triaxiality regime. The GTN model for ASTM A992 structural steels is calibrated from the experiments performed on axisymmetrically notched tensile specimens. The experiments are designed to obtain a range of stress triaxiality and different fracture initiation locations. The non‐uniqueness in the constitutive parameters of the GTN model is illustrated in this study. The choice of a unique set of GTN constitutive parameters is made by choosing the nucleation strain (?_N) as a material constant. The process of estimating this material specific nucleation strain is provided. All the other GTN model parameters corresponding to the material specific nucleation strain (?_N) are evaluated to best fit the experimental results. The calibrated GTN model is shown to predict the load displacement behaviour, ductility and fracture initiation locations in the notched specimens. The calibrated GTN parameters are used to successfully predict the ductility of structural components: (a) bars with a hole; (b) plate with reduced section and (c) plate with holes; that are typically found in structural engineering applications.     

Computation of entropy generation in dissipative transient natural convective viscoelastic flow

Entropy generation is an important aspect of modern thermal polymer processing optimization. Many polymers exhibit strongly non‐Newtonian effects and dissipation effects in thermal processing. Motivated by these aspects in this study, a numerical analysis of the entropy generation with viscous dissipation effect in an unsteady flow of viscoelastic fluid from a vertical cylinder is presented. The Reiner‐Rivlin physical model of grade 2 (second‐grade fluid) is used, which can envisage normal stress variations in polymeric flow‐fields. Viscosity variation is included. The obtained governing equations are resolved using implicit finite difference method of Crank‐Nicolson type with well imposed initial and boundary conditions. Key control parameters are the second‐grade viscoelastic fluid parameter (), viscosity variation parameter (), and viscous dissipation parameter (). Also, group parameter (), Grashof number (Gr), and Prandtl number (Pr) are examined. Numerical solutions are presented for steady‐state flow variables, temperature, time histories of friction, wall heat transfer rate, entropy, and Bejan curves for distinct values of control parameters. The results specify that entropy generation decreases with augmenting values of , , and Gr. The converse trend is noticed with increasing Pr and . Furthermore, the computations reveal that entropy and Bejan lines only occur close to the hot cylinder wall.     

Optimization of infrared radiation cure process parameters for glass fiber reinforced polymer composites

Elevated temperature post curing is one of the most critical step in the processing of polymer composites. It ensures that the complete cross-linking takes place to produce the targeted properties of composites. In this work infrared radiation (IR) post curing process for glass fiber reinforced polymer composite laminates is studied as an alternative to conventional thermal cure. Distance from the IR source, curing schedule and volume of the composite were selected as the IR cure parameters for optimization. Design of experiments (DOE) approach was adopted for conducting the experiments. Tensile strength and flexural strength of the composite laminate were the responses measured to select the final cure parameters. Analysis of variance (ANOVA), surface plots and contour plots clearly demonstrate that the distance from the IR source and volume of the composite contribute nearly 70% to the response functions. This establishes that polymer composites cured using IR technique can achieve the same properties using only 25% of the total time compared to that of conventional thermal curing.