Controlling soil water content in fertiliser dissolution experiments

Phosphorus lost in runoff from agricultural land leads to the enrichment of surface waters and contributes to algal blooms. Fertilisers are one source of this P. To compare the water available P of different fertiliser formulations in the laboratory it is necessary to control environmental conditions, temperature, relative humidity and soil water content, prior to simulating rainfall. Two chambers were designed in which relative humidity and soil water content were controlled using salt solutions. An initial design comprising a sealed chamber with three layers of soil samples over a salt bath was found to be inferior to a single layer design. The changes in water content of soil samples were used to test the single layer chamber in a constant temperature environment (15 °C) using a saturated KCl solution (90% relative humidity). Based on the final soil water content of the samples, the spatial variation within the chamber was within tolerable limits. The single layer chamber was used for a simulation experiment comparing the water available P of two commercial fertilisers. Using a saturated resorcinol solution (95% relative humidity) soil samples were equilibrated at 15 °C for 21 days, fertiliser added, and the water available P measured up to 600 h after fertiliser application. The results indicate that the amount of water available P was related to the fertiliser compound and exponentially related to the time since fertiliser application. It was concluded that the single layer chamber is suitable for controlling relative humidity and soil water content in trials such as these where the water available P of fertilisers are being compared.     

3D printing of bone substitute implants using calcium phosphate and bioactive glasses

Customized implants for bone replacement are a great help for a surgeon to remodel maxillofacial or craniofacial defects in an esthetical way, and to significantly reduce operation times. The hypothesis of this study was that a composite of β-tricalcium phosphate (β-TCP) and a bioactive glass similar to the 45S5 Henchglass^® is suitable to manufacture customized implants via 3D-printing process. The composite was chosen because of the bioresorption properties of the β-TCP, its capability to react as bone cement, and because of the adjustability of the bioactive glass from inert to bioresorbable. Customized implants were manufactured using the 3D-printing technique. The four point bending strength of the printed specimens was 14.9 MPa after sintering. XRD analysis revealed the occurrence of two other phases, CaNaPO₄ and CaSiO₃, both biocompatible and with the potential of biodegradation. We conclude that it is possible to print tailored bone substitute implants using a bioactive TCP/glass composite. The glass is not involved as reactive substance in the printing process. This offers the opportunity to alter the glass composition and therefore to vary the composition of the implant.     

Synthesis and electrospun fiber mats of low Tg poly(propylene fumerate‐co‐propylene maleate)

Many publications have examined the biodegradable polymer poly(propylene fumate) (PPF) for use in tissue engineering applications. We have examined a similar crosslinkable polymer system, poly(propylene fumerate)‐co‐(propylene maleate) (PPFcPM), derived from maleic anhydride (MA) and 1,2‐propylene diol (PD). This copolymer system uses a less expensive monomer as well as leads to varied ratios of fumerate to maleate groups, allowing tuning of the crosslinked polymer properties such as degradation rate. Two different reaction conditions were used to synthesize the copolymer from MA and PD. In the first case (Method A), toluene was used as a solvent to azeotropically (85°C) remove water to drive the acid catalyzed esterification reaction. In the second case (Method B), the initial ring opening reaction was conducted, followed by addition of catalyst and removal of water to produce polymer of higher molecular weight. Both polymer systems had glass transition temperatures (T_g) below room temperature. The low T_g PPFcPM was dissolved in chloroform along with the photoinitiator phenylbis(2,4,6‐trimethylbenzoyl)‐phosphine oxide (BAPO) and electrospun. The polymer fibers were crosslinked soon after they formed to produce noncalendaring 3D porous scaffolds. Control experiments without the BAPO photoinitiator did not produce fiber mats. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Particle In-Flight and Coating Properties of Fe-Based Feedstock Materials Sprayed with Modern Thermal Spray Systems

New developments in the field of thermal spraying systems (increased particle velocities, enhanced process stability) are leading to improved coatings. Innovations in the field of feedstock materials are supporting this trend. The combination of both has led to a renaissance of Fe-based feedstocks. Using modern APS or HVOF systems, it is now possible to compete with classical materials for wear and corrosion applications like Ni-basis or metal-matrix composites. This study intends to give an analysis of the in-flight particle and spray jet properties achievable with two different modern thermal spraying systems using Fe-based powders. The velocity fields are measured with the Laser Doppler Anemometry. Resulting coatings are analyzed and a correlation with the particle in-flight properties is given. The experiments are accompanied by computational fluid dynamics simulations of spray jet and particle velocities, leading to a comprehensive analysis of the achievable particle properties with state-of-the-art HVOF and APS systems.     

Bioenergetic Alterations of Metabolic Redox Coenzymes as NADH,FAD and FMN by Means of Fluorescence Lifetime Imaging Techniques

Metabolic FLIM (fluorescence lifetime imaging) is used to image bioenergetic status in cells and tissue. Whereas an attribution of the fluorescence lifetime of coenzymes as an indicator for cell metabolism is mainly accepted, it is debated whether this is valid for the redox state of cells. In this regard, an innovative algorithm using the lifetime characteristics of nicotinamide adenine dinucleotide (phosphate) (NAD(P)H) and flavin adenine dinucleotide (FAD) to calculate the fluorescence lifetime induced redox ratio (FLIRR) has been reported so far. We extended the FLIRR approach and present new results, which includes FLIM data of the various enzymes, such as NAD(P)H, FAD, as well as flavin mononucleotide (FMN). Our algorithm uses a two-exponential fitting procedure for the NAD(P)H autofluorescence and a three-exponential fit of the flavin signal. By extending the FLIRR approach, we introduced FLIRR1 as protein-bound NAD(P)H related to protein-bound FAD, FLIRR2 as protein-bound NAD(P)H related to free (unbound) FAD and FLIRR3 as protein-bound NAD(P)H related to protein-bound FMN. We compared the significance of extended FLIRR to the metabolic index, defined as the ratio of protein-bound NAD(P)H to free NAD(P)H. The statistically significant difference for tumor and normal cells was found to be highest for FLIRR1.     

Expression Profiles of ASIC1/2 and TRPV1/4 in Common Skin Tumors

The acid-sensing ion channels ASIC1 and ASIC2, as well as the transient receptor potential vanilloid channels TRPV1 and TRPV4, are proton-gated cation channels that can be activated by low extracellular pH (pH_e), which is a hallmark of the tumor microenvironment in solid tumors. However, the role of these channels in the development of skin tumors is still unclear. In this study, we investigated the expression profiles of ASIC1, ASIC2, TRPV1 and TRPV4 in malignant melanoma (MM), squamous cell carcinoma (SCC), basal cell carcinoma (BCC) and in nevus cell nevi (NCN). We conducted immunohistochemistry using paraffin-embedded tissue samples from patients and found that most skin tumors express ASIC1/2 and TRPV1/4. Striking results were that BCCs are often negative for ASIC2, while nearly all SCCs express this marker. Epidermal MM sometimes seem to lack ASIC1 in contrast to NCN. Dermal portions of MM show strong expression of TRPV1 more frequently than dermal NCN portions. Some NCN show a decreasing ASIC1/2 expression in deeper dermal tumor tissue, while MM seem to not lose ASIC1/2 in deeper dermal portions. ASIC1, ASIC2, TRPV1 and TRPV4 in skin tumors might be involved in tumor progression, thus being potential diagnostic and therapeutic targets.     

Development of a selective broth medium for the detection of injured Campylobacter jejuni by capacitance monitoring

The purpose of these studies was to develop a conductimetric method for the rapid detection of Campylobacter jejuni. Numerous basal medium components were analyzed to develop a growth-enhancing broth medium for detection of freeze-injured Campylobacter cells using a conductimetric system. The final medium was composed of a modified Campy-Line agar from which the agar and triphenyltetrazolium chloride were removed and the amino acid, L-arginine was added. Pure isolates of C. jejuni. (frozen and thawed to produce stressed cells) were utilized to test the detection methodology. Monitoring of significant changes in the capacitance signal was found suitable for detection of Campylobacter proliferation. Using stressed pure cultures, Campylobacter growth was repeatedly detected at very low inoculum levels (about one cell per well). There was a direct linear relationship between detection times (DTs) and the initial inoculum level. For example, using a single strain, the mean DT (n = 20) at the 10 CFU/ml inoculum level was 28.6 h, with 100% of the inoculated wells detecting. The mean DTs at the 100, 1,000, and 10,000 CFU/ml inoculum levels were 24.9, 21.4, and 17.0 h, respectively. This study demonstrates that conductimetric methods can be utilized for the rapid detection of C. jejuni.     

Detection of Salmonella in food,feed and veterinary samples by EU laboratories

The European Union Reference Laboratory (EURL) for Salmonella organises interlaboratory comparison studies on bacteriological detection of Salmonella in different matrices (veterinary, food and animal feed) amongst National Reference Laboratories for Salmonella of the 27 European Member States (EU-MS). The EURL also gives non-EU Member States (EU candidate countries, member countries of the European Free Trade Association (EFTA) and third countries from outside Europe) the opportunity to participate in these studies. The objective of the studies is to test the ability of the participating laboratories to detect Salmonella at different contamination levels in the various matrices. In addition a comparison is made between the prescribed method of the food and animal feed studies (ISO 6579: RVS and MKTTn) and the prescribed method of the veterinary studies (annex D of ISO 6579: MSRV).This article describes the performance of the individual laboratories in the interlaboratory comparison studies as organised by the EURL for Salmonella in the period 2004-2010.The performance of the majority of the NRLs improved during the course of the studies. Overall the NRL laboratories performed well and were able to detect Salmonella in the different tested matrices. After improvement of the samples, it was possible to define criteria for good performance in the studies organised since 2006. In the eight interlaboratory comparison studies organised in the period 2006–2010, 15 laboratories found in total 19 deviations of which eight concerned a false positive blank result. The other deviations concerned sensitivity problems (false negative results). After checking and improving several technical aspects, the underperforming participating laboratories were able to improve their performance in a follow-up study.     

Experimental investigation of a direct driven radial compressor for domestic heat pumps

The presence of oil in domestic heat pumps is an obstacle toward higher efficiency, particularly for enhanced surface evaporators and for advanced concepts based on two-stage cycles. Very compact direct driven radial compressors supported on oil-free bearings represent a promising alternative. This paper presents the derivation of the specifications, the choice for an appropriate refrigerant fluid and the design of a proof of concept prototype with the various tradeoffs between the impeller characteristics to follow the seasonal heat demand, the bearing and rotordynamics for a stable operation. Heat pump simulation results, the design of the impeller as well as the layout of the experimental facility and first experimental results are presented. An impeller with a tip diameter of 20 mm has been tested at rotational speeds of up to 210 krpm reaching pressure ratios in excess of 3.3 and efficiencies above 78%. The refrigerant chosen for this first experimental approach is HFC 134a.