Connection of VLSI chips to printed circuit board using stacked solder bumps

A new type of flip-chip interconnection technology usingstacked solder bumps is proposed, where the diameter of theupper solder bump is less than that of the lower ones. This isto reduce the capacitance between the stacked solder bumps and the ground plane and to prolong the lifetime ofthe solder joints.     

Effects of the initial stress on the propagation and localization properties of Rayleigh waves in randomly disordered layered piezoelectric phononic crystals

In this paper, the effects of the initial stress on the propagation and localization properties of the Rayleigh surface waves in randomly disordered layered piezoelectric phononic crystals are studied. Due to different mechanical properties between the piezoelectric material and the polymer, different initial stresses in these two layers satisfying the equilibrium condition and interfacial compatibility are considered, which is more suitable for the practical cases. The transfer matrix between two consecutive piezoelectric unit cells is derived according to the continuity conditions. The expression of the localization factor is presented, and the wave localization properties are analyzed. Numerical calculations for the PVDF/PZT–2 periodic composites with the initial stress are performed. The band gap characteristics are studied taking the mechanical and electrical coupling into account. It is found that the localization degree can be influenced by the piezoelectric constants. With the increase in the piezoelectric constant, the stop band regions are enlarged for the ordered structures, and the localization properties of Rayleigh waves are strengthened for the disordered systems. The Rayleigh waves will be localized in mistuned periodic piezoelectric composites. The characteristics of band gaps and wave localization in ordered and disordered piezoelectric phononic crystals can be significantly changed by tuning the initial stress.     

Thermal deformation measurement of the solder joints in electronic packages using electron moiré method

In this paper, electron moiré method is used to measure the thermal deformation of electronic packages. In order to observe the electron moiré fringe, a holographic grid was replicated on the cross section of the BGA type package at 150°C. This grid was fabricated on a glass plate using a moving point holographic system, and was replicated to measured area at high temperature. Under SEM, the holographic grid(specimen grid) and a programmed electron beam scan(master grid) interfere and form electron moiré patterns. The shear strain measurement technique using electron moiré method is described. Using the electron moiré method, the shear strains in the different solder joints were measured and analysed. Some useful results were obtained.     

Electrical conductivity of metastable κ-CeZrO4 phase possessing ordered arrangement of Ce and Zr ions

Electrical conductivity σ_t of metastable κ-CeZrO₄ possessing ordered arrangement of Ce and Zr ions in a manner similar to a pyrochlore-type was measured as a function of temperature and time, and compared with tetragonal metastable t′-(Ce_0.5Zr_0.5)O₂ and t′_meta-(Ce_0.5Zr_0.5)O₂ phases possessing random arrangement of the cations. The κ disk was prepared by reoxidizing a pyrochlore-type precursor in O₂ gas at 873 K. The σ_t as measured for the κ-CeZrO₄ was reproducible as a function of temperatures between 957 and 1190 K. At increasing temperatures above 1233 K, the σ_t decreased gradually with time due to the phase transition: κ→t′, and became consistent with the t′. Although the κ-CeZrO₄ phase is thermodynamically less stable than the t′-(Ce_0.5Zr_0.5)O₂, it was virtually stable up to around 1233 K. It was found from the change in the σ_t due to the phase transition that the σ_t for the metastable κ-CeZrO₄ was an order of magnitude higher than that for the t′ and was similar to that for the t′_meta. It was previously reported that a phase transition, t′_meta→t′, occurred above 1143 K. The phase transition, κ→t′, accompanied by redistribution of the cations appeared to occur at higher temperatures than that for t′_meta→t′ leaving random cation arrangement.     

Circulating vascular cell adhesion molecule-1 (VCAM-1) in atherosclerotic NIDDM patients

Vascular cell adhesion molecule-1 (VCAM-1) has been shown to be highly expressed in atherosclerotic lesions. Although the soluble form of VCAM-1 (sVCAM-1) is detected in human sera, the relation between the degree of atherosclerosis and serum sVCAM-1 level has not been defined. In the present study, sVCAM-1 concentrations were measured in sera from 101 Japanese NIDDM patients. The mean +/- SD serum sVCAM-1 concentration in 26 patients with symptomatic atherosclerotic vascular diseases (789 +/- 187 ng/ml) was higher than that in 75 patients without the disease (664 +/- 175 ng/ml). Among the 101 NIDDM patients, 56 had atherosclerotic change of the carotid arteries, based on the evaluation by high-resolution B-mode ultrasonography. Their sVCAM-1 level was 759 +/- 201 ng/ml, higher than that in 45 patients without any detectable atherosclerosis of the carotid arteries (619 +/- 130 ng/ml). In addition, there was a positive correlation between sVCAM-1 concentration and thickness of the intimal plus medial complex (IMT) of the carotid arteries in the NIDDM patients (r = 0.41, P < 0.0001). Multivariate regression analysis revealed significant predictors of mean IMT value to be sVCAM-1 concentration (F = 62.88, P = 0.0001) and age (F = 9.59, P = 0.0026). By contrast, sVCAM-1 concentration was not increased in nondiabetic patients with atherosclerotic change of the carotid arteries (668 +/- 191 ng/ml; n = 36) compared with those without the atherosclerotic change (632 +/- 177 ng/ml; n = 28), and there was no correlation between sVCAM-1 level and IMT of the carotid arteries in the nondiabetic subjects. These results indicate that circulating sVCAM-1 may be a marker of atherosclerotic lesions in NIDDM patients with symptomatic and asymptomatic atherosclerosis.     

An autopsy case of primary squamous cell carcinoma of the liver associated with hepatitis C virus antibody positive liver cirrhosis

An increase in potassium (K) intake may lower blood pressure (BP), but inconsistent results have been obtained in clinical trials. We studied the effects of K supplementation in hypertensive patients with monitoring of home and ambulatory BP. Fifty-five patients with essential hypertension (26 men, 29 women, 36-77 years old) participated in this study. A 4-week K supplementation period and 4-week control period were assigned in a randomized crossover manner. During the K period, the subjects were given 64 mmol/day of K as slow-release KCl tablets. Office, home, and 24-h BP, as well as serum and urinary electrolytes, were measured at the end of each period. In the control period, office, home, and 24-h BP were 151 +/- 2/88 +/- 1 (mean +/- SE), 138 +/- 1/83 +/- 1, and 137 +/- 1/81 +/- 1 mm Hg, respectively. Serum K increased from 4.15 +/- 0.04 to 4.42 +/- 0.05 mmol/L, and urinary K increased from 54 +/- 2 to 96 +/- 3 mmol/day with the K supplementation. Office, home, and 24-h BP were significantly lower in the K period than in the control period, although the differences were small (2.7 +/- 1.1/1.4 +/- 0.6, 3.6 +/- 0.9/1.7 +/- 0.5, 3.4 +/- 1.0/1.2 +/- 0.5 mm Hg, respectively). Changes in home and 24-h systolic BP with K supplementation were highly significant (P < .001), compared with office BP (P < .05). The change in 24-h systolic BP was correlated negatively with baseline BP and urinary Na/K ratio, and positively with baseline urinary K excretion. The changes in daytime and nighttime BP were comparable. These results indicate that increasing K intake lowers BP in hypertensive subjects, especially in those with higher BP and lower K intake. Our study supports the usefulness of K supplementation in the treatment of hypertension, although its antihypertensive effect may be small.     

Enhancement of surface acidity and catalytic activity by glass formation of calcium metaphosphate

Effective acid sites for the dehydration of 2-propanol and isomerization of 1-butene were found to be generated by glass formation of calcium metaphosphate. The number of these sites with strong acidity remarkably decreased by the crystallization of the glass, where the condensation of hydroxyl groups were significant. Thus, the sites must be the monohydrogen phosphate protons.     

Transforming activity of a newly cloned androgen-induced growth factor

Our previous study demonstrated that androgen-dependent growth of mouse mammary carcinoma cells (SC-3) was mediated through an induction of heparin-binding growth factor, termed as androgen-induced growth factor (AIGF). Here, we report that NIH3T3 cells stably transfected with AIGF expression vector exhibit the abilities of tumor formation in nude mice, focus formation in monolayer culture and colony formation in soft agar. Thus, this newly cloned growth factor can be categorized as an oncogene. In addition, androgen-induced enhancement of DNA synthesis in SC-3 cells can be blocked by simultaneous incubation with AIGF antisense oligonucleotides. The possibility is also addressed that AIGF exerts its biological activity through an interaction with fibroblast growth factor (FGF) receptor. Transfection of expression vector encoding a variant form of FGF receptor-1 cloned from SC-3 cells into FGF receptor-negative L6 cells results in AIGF-dependent inhibition of differentiation. These results demonstrate that the ability of androgen to elicit transformed phenotype of SC-3 cells is mediated through AIGF induction and its interaction with FGF receptor-1.