Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Address‐While‐Display technique combined with gas‐discharge AND logic for driving AC‐PDPs

A hybrid AWD/AND drive technique has been developed in which an Address‐While‐Display (AWD) scheme is combined with an AND logic characteristic that gas discharges demonstrate. The AWD technique enables AC‐PDPs to be driven at high luminance, while the AND logic reduces the number of scan drivers by an order of magnitude. A detailed analysis of the addressing operation has been made. The hybrid drive utilizes the AND logic in two ways: (1) a combination of two voltage pulses and (2) a combination of a voltage pulse and discharge‐priming particles. It was found that the addressing operation requires the establishment of a discharge between the scan and data electrodes, and also between the scan and display electrodes.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Application of a novel polypropylene to the insulation of an electric power cable

Cross‐linked polyethylene (XLPE) has been widely adopted as insulating material for high‐voltage power cables up to 500 kV. Further improvement of electrical and thermal properties on insulating material is required in order to increase cable operation efficiency. Therefore, the development of novel insulating material possessing high thermal properties will be necessary. Recent progress of catalysis technology contributes to obtain new polymeric materials which may be applied to electrical insulation. The authors investigated the basic properties of newly developed stereoregular syndiotactic polypropylene (s‐PP) which is synthesized with homogeneous metallocene catalyst. Though recycling of cross‐linked polymers such as conventionally used XLPE may be difficult because of their poor heat deformation, the s‐PP which is not cross‐linked must be suitable for recycling. A series of experiments on its physical and electrical properties gave the following results.

• (1) s‐PP has sufficient flexibility compared with isotactic polypropylene (i‐PP ).
• (2) Both AC and lightning impulse breakdown strength of s‐PP in spite of no cross‐linking are superior to those of XLPE in the temperature range from 25 to 90 °C.
• (3) Degradation by copper of s‐PP is less than that of i‐PP.
• (4) s‐PP/VLDPE blend shows sufficient brittleness temperature for use.

These results suggested that s‐PP should serve as insulating material for power cables at higher‐temperature operation. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(1): 18–26, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002//eej.10210     

Gel permeation chromatography using controlled-porosity glass. II. Polyacrylamide aqueous solutions

In a study of polyacrylamide in solutions we have required the rapid characterization on chromatographies. The application to the aqueous solution of the GPC using controlled-porosity glass has been examined from both the viewpoint of the effect of salt addition and the GPC mechanism. An adequate addition to neutral salt, 0.005M KCI to the eluent, gave rise to the elution behaviors being in accord with the hydrodynamic volume concept of the GPC separation.     

Synthesis of Hadamard transformers by use of multimode interference optical waveguides

We propose a synthesis method of optical Hadamard transformer using multimode interference (MMI) couplers. By using the signal transfer matrix of 2 x 2, 4 x 4, and 8 x 8 MMI couplers, we show that sum and difference units of input signals can be synthesized. An interchange unit of two signals can also be synthesized. One synthesis method of Hadamard transformers is a combination of only 2 x 2 units, and the other is a combination of N x N(N > or = 4) units as well as 2 x 2 units. The design examples of operation units are shown, and the size and the output power of Hadamard transformers are estimated.     

ADAPTIVE CONTROL DESIGN FOR NONLINEARLY PARAMETERIZED SYSTEMS WITH A TRIANGULAR STRUCTURE

A novel adaptive backstepping design for a class of nonlinearly parameterized systems with a triangular structure is proposed. Under the Lipschitz condition with respect to unknown parameters of the system, an effective adaptive controller is designed without the requirement on the compactness of the unknown parametric set. Especially, the proposed adaptive control enables the advantage of “tuning function concept”, which results in only one estimation law for the unknown parameters. Our simulation with induction motor model particularly shows the viability of the obtained results.     

Development of spectral band cloning techniques for soil nutrients estimation

Satellite‐based monitoring is an indispensable tool to guide soil‐specific crop management. However, it has attained little success in the estimation of soil nutrients due to the limitations incurred from inherent spectral characteristics. In this study, spectral band cloning (SBC) is developed and proposed to augment the soil nutrient predictive capabilities of broadband satellite data. Fine‐spectral channels of spectrometers were synchronized with coarse resolution of IRS satellite data to generate nutrient‐sensitive cloned IRS bands. Soil samples, collected at the time of satellite image acquisition in Lop Buri, Thailand, were analyzed both spectrally and chemically, viz., soil organic matter (OM), phosphorus, potassium and iron. The resulting SBC‐based models showed acceptable correlations, which otherwise were unattainable from raw IRS bands through prevailing models. Accuracy and validation measures showed good agreements between the measured and estimated nutrient surfaces. It is concluded that the SBC is a promising method of quantitative soil nutrient mapping, and could further be used for identification and mapping of other indiscernible biophysical parameters.