White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes

Here, it is demonstrated that energy transfer in a blend of semiconducting polymers can be strongly reduced by non‐covalent encapsulation of one constituent, ensured by threading of the conjugated strands into functionalized cyclodextrins. Such macrocycles control the minimum intermolecular distance of chromophores with similar alignment, at the nanoscale, and therefore the relevant energy transfer rates, thus enabling fabrication of white‐light‐emitting diodes (CIE coordinates: x = 0.282, y = 0.336). In particular, white electroluminescence in a binary blend of a blue‐emitting, organic‐soluble rotaxane based on a polyfluorene derivative and the green‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole ( F8BT ) is achieved. Morphological and structural analyses by atomic force microscopy, fluorescence mapping, µ‐Raman, and fluorescence lifetime microscopy are used to complement optical and electroluminescence characterization, and to enable a deeper insight into the properties of the novel blend.     

Conjugated Polymers: High‐Resolution Scanning Near‐Field Optical Lithography of Conjugated Polymers (Adv. Funct. Mater. 17/2010)

The fabrication of high‐resolution nanostructures in both poly(p‐phenylene vinylene), PPV, and a crosslinkable derivative of poly(9,9′‐dioctylfluorene), F8, using scanning near‐field optical lithography, is reported. The ability to draw complex, reproducible structures with 65000 pixels and lateral resolution below 60 nm (< λ/5) is demonstrated over areas up to 20 μm × 20 μm. Patterning on length‐scales of this order is desirable for realizing applications both in organic nanoelectronics and nanophotonics. The technique is based on the site‐selective insolubilization of a precursor polymer under exposure to the confined optical field present at the tip of an apertured near‐field optical fiber probe. In the case of PPV, a leaving‐group reaction is utilized to achieve insolubilization, whereas the polyfluorene is insolubilized using a photoacid initiator to create a crosslinked network in situ. For PPV, resolubilization of the features is observed at high exposure energies. This is not seen for the crosslinked F8 derivative, r‐F8Ox, allowing us to pattern structures up to 200 nm in height.     

Multifunctional Magnetic Optical Sensor Particles with Tunable Sizes for Monitoring Metabolic Parameters and as a Basis for Nanotherapeutics

Magnetic optical sensor particles with multifunctional cores and shells are synthesized via a facile nanoprecipitation method and the subsequent modification of the particle shell. The hydrophobic particle core includes optical oxygen indicators, a light harvesting system, photosensitizers, and magnetic nanoparticles. Further functionalities are introduced by modifying the shell with enzymes, antibodies, multiple layers of polyelectrolytes, stimuli‐responsive polymers, and luminescent indicator dyes. The hydrodynamic diameter is tunable by varying different precipitation parameters.     

Tunable ferroelectric impedance matching networks and their impact on digital modulation system performance

In this paper the bit error rate performance and error vector magnitude of a tunable impedance matching network is analyzed assuming QPSK, 16-QAM and 64-QAM digital modulation schemes. The characterized tunable impedance matching network is based on barium–strontium–titanate ferroelectric thick-film varactors. Inherent dispersive behavior is subsumed into the forward transmission of the passive device. Due to this nonlinear phase response, in general to maximize the overall system performance, an agile tuning of the varactor values is demonstrated, taking into account the phase and group delay of s₂₁ parameter. Detailed signal simulation results based on measured data of a testbed are presented. The influence of varying matched impedances on the tuning behavior with different modulation bandwidths is discussed at a center frequency of 1.9 GHz.     

Concept and demonstration of an intermediate band tandem device for solar energy conversion

We have realized a tandem solar cell design that combines a pin‐junction with a photovoltaic intersubband absorber. This concept allows harvesting light in the visible range and the near‐ and mid‐infrared at the same time, and theoretically, energy conversion efficiencies beyond the Shockley–Queisser‐limit could be achieved. A test structure was grown, and the operation of this concept could be confirmed, in principal with an optical two‐beam experiment. The basic characteristics of the device can be explained with an equivalent circuit design that consists of three individual cells, and we find an obvious analogy to the concept of the intermediate band solar cell with noteworthy advantages at some points. Our results show, that for a working device it is crucial to adjust the properties of the photovoltaic intersubband absorber for optimal charge separating performance at the working point of the solar cell. Copyright © 2015 John Wiley & Sons, Ltd.     

Controlling Chiral Spin States of a Triangular‐Lattice Magnet by Cooling in a Magnetic Field

Magnetic materials with a non‐collinear and non‐coplanar arrangement of magnetic moments hosting a nonzero scalar spin‐chirality exhibit unique magnetic and spin‐dependent electronic transport properties. The spin chirality often occurs in materials where competing exchange interactions lead to geometrical frustrations between magnetic moments and to a strong coupling between the crystal lattice and the magnetic structure. These characteristics are particularly strong in Mn‐based antiperovskites where the interactions and chirality can be tuned by substitutional modifications of the crystalline lattice. This study presents evidence for the formation of two unequal chiral spin states in magnetically ordered Mn_3.338Ni_0.651N antiperovskite based on density functional theory calculations and supported by magnetization measurements after cooling in a magnetic field. The existence of two scalar spin‐chiralities of opposite sign and different magnitude is demonstrated by a vertical shift of the magnetic‐field dependent magnetization and Hall effect at low fields and from an asymmetrical magnetoresistivity when the applied magnetic field is oriented parallel or antiparallel to the direction of the cooling field. This opens up the possibility of manipulating the spin chirality for potential use in the emerging field of chiral spintronics.     

The E3 architecture: enabling future cellular networks with cognitive and self‐x capabilities

Future mobile networks are expected to be complex heterogeneous systems. On the one hand this will enable users to take advantage of a number of different access technologies. On the other hand it will seriously affect network management procedures since more extensive operations and decisions will have to be dealt with. To tackle these challenges a number of new dynamic mechanisms need to be designed. It is imperative that certain network management tasks have to be performed without human intervention to reduce the OPEX costs and achieve faster responses in different events. To achieve this goal, the introduction of self‐x functionalities, combined with cognitive mechanisms and the ability to reconfigure network entities and terminals, is required. Moreover, the introduction of a new pilot channel needs to be considered to assist the terminals in selecting the most suitable radio access technology according to their requirements. We present the functional architecture of an evolved network that was designed in the context of the EU‐funded IP project ‘E³: End‐to‐End Efficiency’. This architecture aims to enhance existing procedures usually performed in traditional operation and maintenance systems (e.g. spectrum management, network planning, configuration actions). We explain the rationale of our design and provide specific examples to illustrate the role of the different functional entities and their interfaces. A considerable part of this architecture has recently been approved as a feasibility study by the ETSI Committee Reconfigurable Radio System. Copyright © 2010 John Wiley & Sons, Ltd.