Isothermic growth of one spherulite around circular obstacles in a polypropylene foil

Growth of one spherulite within a thin foil of polypropylene around one circular obstacle or around combinations of circular obstacles is investigated. For each obstacle there exists a region of shadow, seen from the nucleus of the spherulite, which influences the growth of the spherulite. Within any region of shadow the growth fronts are evolvents of the obstacle's boundary, because the spherulite grows isotropically. When two growth fronts belonging to one spherulite meet each other inside the shadow, an intrinsic grain boundary is formed for each obstacle. Additionally, growth of one spherulite around a rectangular obstacle and a spherical obstacle is investigated.     

Zu einem Phänomen der Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstählen und NiCrMo-Legierungen in Chloridlösungen

On a phenomenon of the limitation of pitting corrosion at high alloyed special stainless steels and NiCrMo-alloys in chloride solutions Testing the pitting corrosion resistance of high alloyed special stainless steels and NiCrMo-alloys in chloride solutions there was observed a limitation of the pitting corrosion range toward more positive potentials. Above this limitation, the so-called pitting corrosion limitation potential, the pit initiation by all means is prevented, but the growth of pits which had been initiated before in the pitting corrosion range not necessarily comes to a stop. Therefore current density-potential curves which are obtained by downward polarization after an initial potential jump into the transpassive region and chronopotentiostatic tests are more suitable to investigate this phenomenon than cyclic polarization measurements and potentiostatic alteration tests. There is indicated a dependence of this phenomenon on temperature. The phenomenon of a limitation of the pitting corrosion range toward more positive potentials has been found until now at alloy 926, alloy 31, alloy 28, alloy 59 and alloy C-276.     

Determination of carbon black fillers in vulcanizates of natural rubber by metathesis degradation

A method for the determination of carbon black fillers in peroxide vulcanizates or sulfur vulcanizates of natural rubber (NR, cis-1,4-polyisoprene) by metathesis degradation with 1-octene was developed using the catalyst WCl₆? (C₂H₅)₃Al₂Cl₃. The carbon black was separated from the reaction mixture by centrifuging and determined by weighing. In this connection, investigations were also performed with the catalyst WCl₆? C₂H₅Al₂Cl₃ which was less suitable for filler determination. The rate of degradation of crosslinked NR with (E)-4-octene was measured. Metathesis reactions of 2-methyl-2-pentene (low-molecular-weight model compound of NR) with 7-tetradecene showed the importance of double bond shift for the degradation of NR.     

方便显示器升级的复合型VGA编码器／解码器

较老式的计算机系统通过4根75Ω同轴电缆把RGB(三原色)视频和复合同步信号输送到150英尺外的RGB彩色监视器。如需升级,用于替换的VGA视频卡可直接驱动VGA监视器的内部端接部件带来的75Ω负载。但是,VGA标准使用单独的水平和垂直正向同步信号。向原始电缆添加一根额外的同轴电缆来承载单独的同步信号,这是一种困难并且成本很高的建议。一个明显的解决方案就是把单独的同步信号组合到一种复合格式中。图1中的组合器电路很简单,成本很低,并且可用随时供货的备件来迅速组装。     

The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology

We describe a novel microfluidic perfusion system for high-resolution microscopes. Its modular design allows pre-coating of the coverslip surface with reagents, biomolecules, or cells. A poly(dimethylsiloxane) (PDMS) layer is cast in a special molding station, using masters made by photolithography and dry etching of silicon or by photoresist patterning on glass or silicon. This channel system can be reused while the coverslip is exchanged between experiments. As normal fluidic connectors are used, the link to external, computer-programmable syringe pumps is standardized and various fluidic channel networks can be used in the same setup. The system can house hydrogel microvalves and microelectrodes close to the imaging area to control the influx of reaction partners. We present a range of applications, including single-molecule analysis by fluorescence correlation spectroscopy (FCS), manipulation of single molecules for nanostructuring by hydrodynamic flow fields or the action of motor proteins, generation of concentration gradients, trapping and stretching of live cells using optical fibers precisely mounted in the PDMS layer, and the integration of microelectrodes for actuation and sensing.     

Analyse flüchtiger Inhaltsstoffe des Holunders

European Food Research and Technology - Die Analyse und Identifizierung von Aromastoffen mittels GC/MS-Technik aus Holunderbeeren und -blüten wird beschrieben. Durch Extraktion mit...     

Entschwefelung von gerührtem und ungerührtem Roheisen mit kalkreicher Schlacke unter oxidierender Gasatmosphäre

Aus Betriebsergebnissen bei der Pfannenentschwefelung ist ein negativer Einfluß oxidierender Gasphasen bekannt. Daher war es das Ziel der eigenen Untersuchungen in einer geeigneten Apparatur die Wirkung oxidierender Bedingungen in der Gasphase sowohl auf den Verlauf des Schwefelabbaues in der Schlacke als auch des Schwefeltransportes aus dem Roheisen in die Schlacke zu untersuchen. Oxidierende Gasphasen erwirken bei der Pfannenentschwefelung an der Phasengrenze Schlacke/Gas eine Oxidation des Schwefels aus der Schlacke, ohne jedoch bei ruhender Schlackenschicht ein Oxidationspotential in der Schlacke aufzubauen, das bis zur Phasengrenze Roheisen/Schlacke durchgreift und dort die Entschwefelung des Roheisens durch die Siliciumgehalte stört. Sowohl die Entschwefelung des Roheisens als auch die Oxidation des Schwefels aus der Schlacke werden durch höhere Temperaturen und durch eine Rührwirkung gefördert. Der Schwefeltransport wird bei den ungerührten wie bei den gerührten Schmelzen durch Diffusionsvorgänge gesteuert und auch hier durch steigende Temperaturen und rührende Kräfte begünstigt.