Large strain, viscoelastic and elasto-viscoplastic numerical analysis by means of the finite element method

Finite element procedures and illustrative numerical examples for linear and nonlinear viscoelastic and elasto-viscoplastic bodies are discussed. According to the well-known theory in rheology, the constitutive equation of viscoelastic bodies can be described by the first-order simultaneous differential equation system. Using this result, the finite element equation leads to an equation similar to the Hookean elastic body except for the inclusion of the time increment. The procedure is applicable to certain forms of nonlinear viscoelastic and elasto-viscoplastic bodies. To solve the nonlinear simultaneous equation system, it is convenient to employ the incremental displacement method for the nonlinear problems such as large deformation loading, unloading and cyclic loading behavior.     

Temperature distribution in Li2O pellets under neutron irradiation

The center temperature of Li₂O pellets under neutron irradiation was measured using an encapsuled pin. The surface temperatures of the pellets and the pellet/cladding heat transfer coefficients were estimated on the basis of the well-known conductivity integral.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Organic–inorganic nanomatrix structure and properties of related naturally occurring rubbery macromolecules

The outstanding mechanical properties of soft materials i.e. natural rubber are partly due to the organic–inorganic nanomatrix structure because numerous organic microparticles are dispersed in a small amount of an inorganic nanomatrix composed of inorganic nanoparticles and organic macromolecules. Here we form an organic–inorganic nanomatrix using graft-copolymerization of a vinyl monomer with an inorganic oxide precursor onto natural rubber particles with an average diameter of 1 μm dispersed in water. The inorganic oxide precursor is converted into inorganic oxide nanoparticles through hydrolysis and condensation, forming chemical linkages between natural rubber microparticles and inorganic oxide nanoparticles. Transmission electron microscopy indicates that the organic–inorganic nanomatrix is densely filled with inorganic oxide nanoparticles and the natural rubber microparticles are dispersed in the nanomatrix. This nanomatrix composite realizes both energetic elasticity and entropic elasticity of a soft material, opening a novel field of building block chemistry with respect to a pair of organic microparticles and inorganic nanoparticles.     

Conformational disorder in the Brill transition of uniaxially-oriented nylon 10/10 sample investigated through the temperature-dependent measurement of X-ray fiber diagram

X-ray fiber diagram of uniaxially-oriented nylon 10/10 sample has been measured at the various temperatures. The 11th layer line originating from the methylene zigzag sequences became diffuse above the Brill transition region (140-170 °C), while the layer reflections corresponding mainly to the original repeating period of the parent nylon chains were kept almost unchanged. This observation makes us confirm that in the Brill transition region, the conformational disordering occurs in the methylene sequential parts with keeping the repeating period of the whole skeletal chain by still forming the intermolecular hydrogen bonds between the amide groups of the neighboring chains. This conclusion is consistent with the already-reported infrared spectral data. The characteristic X-ray diffraction patterns observed at the various temperatures were reproduced well by a computer simulation technique utilizing the previously-reported molecular dynamics calculation results.     

Gender differences in hand stability of normal young people assessed at low force levels

To examine gender differences in hand stability, finger position and force holding tasks at low force levels were conducted with 30 male and 30 female young adults. Total fluctuation was defined as the standard deviation of measured data and fluctuation and the 10-Hz component of the physiological tremor were compared between maleand female subjects. In all tasks, the total fluctuation and the 10-Hz tremor were significantly larger in male subjects than females. On average, the fluctuation was 1.3 times larger and the 10-Hz tremor was 1.6 times larger. The results of this study suggest that women have superior hand stability compared with men at low force levels. Finger length, maximal voluntary contraction and surface electromyography were also measured and factors related to gender differences in hand stability are discussed. STATEMENT OF RELEVANCE: Hand stability is crucial for precise manual operations. This study demonstrated gender differences in hand steadiness at low force levels. Though hand dexterity cannot be explained only by hand stability, the results of this study are useful not only for occupational aptitude tests but also for neuropsychological tests.     

Autonomic load balancing of flow monitors

In monitoring flows at routers for flow analysis or deep packet inspection, the monitor calculates hash values from the flow ID of each packet arriving at the input port of the router. Therefore, the monitors must update the flow table at the transmission line rate, so high-speed and high-cost memory, such as SRAM, is used for the flow table. This requires the monitors to limit the monitoring target to just some of the flows. However, if the monitors randomly select the monitoring targets, multiple routers on the route will sometimes monitor the same flow, or no monitors will monitor a flow. To maximize the number of monitored flows in the entire network, the monitors must select the monitoring targets while maintaining a balanced load among them. We propose an autonomous load-balancing method where monitors exchange information on monitor load only with adjacent monitors. Numerical evaluations using the actual traffic matrix of Internet2 show that the proposed method improves the total monitored flow count by about 50% compared with that of independent sampling. Moreover, we evaluate the load-balancing effect on 36 backbone networks of commercial ISPs.     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.     

User Modeling in Spoken Dialogue Systems to Generate Flexible Guidance

We address the issue of appropriate user modeling to generate cooperative responses to users in spoken dialogue systems. Unlike previous studies that have focused on a user’s knowledge, we propose more generalized modeling. We specifically set up three dimensions for user models: the skill level in use of the system, the knowledge level about the target domain, and the degree of urgency. Moreover, the models are automatically derived by decision tree learning using actual dialogue data collected by the system. We obtained reasonable accuracy in classification for all dimensions. Dialogue strategies based on user modeling were implemented on the Kyoto City Bus Information System that was developed at our laboratory. Experimental evaluations revealed that the cooperative responses adapted to each subject type served as good guides for novices without increasing the duration dialogue lasted for skilled users.     

Robust digital control of a DC–DC buck converter with low frequency samplings

A robust DC?CDC converter which can covers extensive load change and also input voltage changes with one controller is needed. Then the demand to suppress output voltage change becomes still severer. We propose an approximate 2-degree-of-freedom (2DOF) digital controller which realized start-up response and dynamic load response independently. The controller makes a control bandwidth wider, and at the same time makes variations of the output voltage small at sudden changes of a load and an input voltage. In this paper, a new approximate 2DOF digital control system with additional zeros is proposed. Using the additional zeros, the second-order differential transfer characteristics between equivalent disturbances and a output voltage are realized. Therefore, the new controller makes variations of the output voltage smaller and the sudden changes of the load and the input voltage. This controller is actually implement on a DSP and is connected to the DC?CDC converter. Experimental results demonstrate that this type of digital controller can satisfy given severe specifications with low frequency sampling.