Improvement in Mechanical Properties of Powder-Processed MoSi2 by the Addition of Sc2O3 and Y2O3

Additions of 1-20 mol% Sc₂O₃ or Y₂O₃ to MoSi₂ eliminate glassy SiO₂, which improves mechanical properties at both ambient and high temperatures. In particular, only 1 mol% ScO₃ additions dramatically enhance three-point bending strength from 521 to 1081 MPa. Vickers hardness, Young's modulus, fracture toughness, and high-temperature strength are also improved by this low level of additive. The improvement of mechanical properties is attributed to the formation of crystalline silicates: Sc₂Si₂O₇, Y₂Si₂O₇, Y₂SiO₅, and Y₄Si₃O₁₂, which are analyzed by XRD, SEM-EDS, and TEM-EDS methods.     

Current distribution in a two-dimensional narrow gap cell composed of a gas evolving electrode with an open part

On the basis of the observation of gas bubbles evolved by electrolysis, a two-dimensional vertical model cell composed of electrodes with open parts for releasing gas bubbles to the back side is proposed. The model cell consists of two layers. One layer forms a bubble curtain with a maximum volume fraction of gas bubbles in the vicinity of the working electrode with open parts. The other. being located out of the bubble layer, is a convection layer with a small volume fraction distributed in the vertical direction under forced convection conditions. The cell resistance and the current distribution were computed by the finite element method when resistivity in the back side varied in the vertical direction along the cell. The following three cases for overpotential were considered: no overpotential, overpotential of the linear type and overpotential of the Butler-Volmer type. It was found that the cell resistance was determined not only by the interelectrode gap but also by the percentage of open area and in some cases by the superficial surface area. The cell resistance varied only slightly with the distribution of the bubble layer in the back side.Nomenclature b linear overpotential coefficient given byb=/i - C proportionality constant given by Equation 15 - d ₁ distance between front side of working electrode and separator - d ₂ thickness of separator - F Faraday constant - I total current per half pitch - i current density at working electrode - i ₀ exchange current density - L length of a real electrolysis cell - n number of electrons transferred in electrode reaction - O _p percentage of open area given by Equation 1 - p pitch, i.e. twice the length of the unit cell, defined by 2(BC) in Fig. 4 - q thickness of bubble curtain, defined by (AM) in Fig. 4 - R gas constant - r _t total cell resistance - r unit-cell resistance defined by (V – V _eq)/I - r _rs residue ofr from sum ofr ₀ andr - r ₀ ohmic resistance of solution when0 _p=0 - r resistance due to overpotential when0 _p=0 - s electrode surface ratio or superficial surface area given by Equation 2 for the present model - T absolute temperature - t thickness of working electrode defined by EF in Fig. 4 - V cell voltage - V _eq open circuit potential difference between working and counter electrodes - solution velocity in cell - ₀ solution velocity at bottom of cell - w width of working electrode, defined by 2(DE) in Fig. 4 - x abscissa located on cell model - y ordinate located on cell model - anodic transfer coefficient - linear overpotential kinetic parameter defined byb/[_bc(p/2)] - d infinitesimally small length on the boundary - volume fraction of gas bubbles in cell - dimensionless cell voltage defined bynF(V – V _eq)/RT - overpotential at working electrode - Butler-Volmer overpotential kinetic parameter defined by [nFi _0bc(p/2)]/RT - coordinate perpendicular to boundary of model cell - ₁ resistivity of bubble-free solution - ₂ resistivity of separator - _bc resistivity of bubble curtain - potential in cell     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

An analysis of the length of hospital stay for cataract patients in Japan using the discrete-type proportional hazard model

We analyze the length of hospital stays of patients hospitalized for cataract and related diseases (Diagnosis Related Groups (DRG) 2041) in Japan, utilizing the data pertaining to 3436 patients on whom one-eye lens operations are performed. We use the discrete-type proportional hazard model to analyze variables that may affect the length of stay.     

Analysis of polymer electrolyte fuel cell performance by electrode polarization model

For development of polymer electrolyte fuel cell (PEFC) lifetime estimation method, a high accuracy PEFC electrode polarization model is required. An electrode polarization model which was previously proposed was verified. However, accuracy of the electrode polarization model was not enough to estimate PEFC performance under various conditions. A new high accuracy PEFC electrode polarization model has been developed based on electrochemical consideration and data observed at elevated pressures. In the cathode polarization model, effects of O₂ diffusion and H₂O plugging have to be considered to obtain high accuracy for long-term operation. In addition, PEFC performance degradation was analyzed by the electrode polarization model. Main factors of PEFC performance degradation are OCV drop, the cathodic activation polarization, voltage drops by O₂ diffusion and H₂O plugging.     

Preliminary spectrum shifter design for intermediate energy nuclear data benchmark experiments with DT neutrons

Integral benchmark experiments with DT neutrons are not always sufficient for nuclear data benchmarking in the MeV region, below 10 MeV. A neutron spectrum shifter, which will be placed between a sample and a DT neutron source, is effective to moderate DT neutrons incident to the sample. In order to estimate effects of the spectrum shifter, the ratio of the contribution of 14 MeV neutrons in the leakage neutron and gamma-ray spectra was calculated with MCNP-4C for an experimental configuration at FNS of JAEA, Japan. The calculations were carried out for a Li₂TiO₃ sample with a Be, D₂O, or ⁷LiD spectrum shifter. It was found out that the Be shifter was superior to others and the Be shifter was effective to decrease the contribution of 14 MeV neutrons especially for secondary gamma-ray spectrum measurements.     

Guided-mode resonant grating filter with an antireflection structured surface

We describe a new structure of guided-mode resonant grating (GMRG) filters with low sideband reflectance. This GMRG filter consists of a high-index thin film on an antireflective structured surface called "moth-eye structure." Since the high-index film undulates along the surface structure, the film acts as a modulated optical waveguide. An incident light wave satisfying a resonant condition is reflected by the GMRG filter, and nonresonant light waves pass through the filter. This GMRG filter is valid for reducing reflection of nonresonant light waves in a wide spectral range. The resonant reflection of this new filter was investigated by numerical calculation based on an electromagnetic grating analysis. In the case of a triangular antireflective surface structure whose thickness is 2x greater than its period, the sideband reflectance for nonresonant light waves was lower than 0.5% for TM-polarized light in a wide range of wavelengths.     

Antifungal activity of the fermentation product of herbs by lactic acid bacteria against tinea

The fermentation product of herbs by lactic acid bacteria (FHL), in which Enterococcus faecalis TH10 predominated, was assayed for antifungal activity against tinea. The antifungal activity of FHL was as high as that of a synthetic fungicide. Autoclaving FHL did not reduce its antifungal activity, whereas neutralizing it did. The results suggested that nonproteinaceous compounds or organic acids in FHL could inhibit the growth of the dermatophyte tinea under low-pH conditions, and that malonic acid and acetic acid could have especially high antifungal activity against tinea.     

An Interactive Deformation System for Granular Material

Computer Graphics (CG) animations of natural phenomena are currently widely used for movies and in video games. Granular materials occur widely in nature, and therefore it is necessary that CG animations represent ground surfaces composed of a granular material as well as model deformations when the granular material comes into contact with other physical rigid objects (called solid objects). In this paper, we propose a deformation algorithm for ground surfaces composed of granular material. The deformation algorithm is divided into three steps: (1) detection of the collision between a solid object and the ground surface, (2) displacement of the granular material and (3) erosion of the material at steep slopes. The proposed algorithm can handle solid objects of various shapes, including concave polyhedra by additionally using a layered data structure called the Height Span Map. Furthermore, a texture sliding technique is presented to render the motion of granular materials. In addition, our implementation of the deformation algorithm can be used at interactive frame rates.     

Market micro-structure analysis by multiagent simulation in X-Economy -- comparison among technical indices

We are developing an agent and server library referred to as X-Economy, by which we can execute multiagent simulations and network games for financial and economic systems. To this end, we analyzed the characteristics of network games in a financial context and compared them with traditional ones. X-Economy has also provided a new research direction in market micro-structure analysis. We executed several kinds of multiagent simulations for technical traders (indices) and obtained non-trivial suggestions regarding the relationship between the market randomness and the effectiveness of technical indices. For instance, the performance of complex technical indices seemed to deeply depend on the characteristics and nature of a market when a market became complex, i.e. it moved far from the Wiener process.