Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.     

A reconfigurable VLSI-based double-lens tracking camera

Watching and tracking an object while seeing a much wider view is one of advantages of the eye system. We proposed and developed a tracking camera system that mimics the eyes by using double-lens modules. In the system, a wide view is captured through the wide-lens module, while the target in it is tracked and magnified through the telescopic lens module. Electronic circuits for tracking control are implemented onto the reconfigurable VLSI or FPGA in order to embed the parallelism in the tracking algorithm into the hardware. A successfully developed FPGA-based prototype performs high-speed tracking at the video-rate. This work was present in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.     

Zinc enhancement of 17beta-estradiol''s anabolic effect in osteoblastic MC3T3-E1 cells

Annexin V belongs to a family of phospholipid binding proteins, the Annexins. It binds in the presence of Ca(2+)-ions with high affinity to negatively charged phospholipids like phosphatidylserine (PS). On the basis of its protein structure and biological activity Annexin V is considered as a protein exhibiting its hitherto unknown function within the intracellular environment. One argument comes from the understanding that PS is predominantly located in membrane leaflets, which face the cytosol. However, recent findings show that each cell type has the molecular machinery to expose PS at its cell surface. This machinery is activated during the execution of apoptosis. Once PS is exposed at the cell surface it exhibits procoagulant and proinflammatory activities. Annexin V will bind to the PS-exposing apoptotic cell and can inhibit thereby the procoagulant and pro-inflammatory activities of the dying cell. These findings together with the presence of Annexin V in the extracellular space depict a novel (patho)Physiological significance for Annexin V in vivo.     

Contribution of IL-1 beta to the enhancement of Campylobacter rectus lipopolysaccharide-stimulated PGE2 production in old gingival fibroblasts in vitro

Campylobacter rectus is associated with adult periodontitis. We previously reported that C. rectus lipopolysaccharide (LPS)-stimulated prostaglandin E2 (PGE2) production in old cells of human gingival fibroblasts (HGFs) is higher than that in young cells. The present study examined whether an enhancement of C. rectus LPS-stimulated interleukin (IL)-1 beta production in old HGFs contributed to the increased production of PGE2. LPS was prepared from C. rectus ATCC33238. HGFs were established from healthy gingiva in three patients, aged 10-12 years. Cellular aging in culture was determined with increasing doubling. The cultured cells were treated with LPS (0.01-10 micrograms/ml), and the amount of IL-1 beta in the medium was measured after a 24 h incubation. The LPS-stimulated IL-1 beta production in each old cell (corresponding to 57-67% of complete life-span) was increased (1.6-2.6 times) compared to that in the young cells (corresponding to 17-20% of the life-span). The IL-1 beta mRNA synthesis in the presence of LPS in the old cells was higher than that in the young cells. The enhancement of LPS-stimulated PGE2 production was inhibited by anti-IL-1 beta antibody and by IL-1 receptor antagonist. These findings suggest that the greater ability of old cells to produce PGE2 in response to C. rectus LPS is due to their greater level of IL-1 beta.     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

Growth Morphology and Mechanism of a Hollow ZnO Polycrystal

When zinc oxide and graphite were placed into an alumina crucible, with a square hole (∼3 mm ×∼3 mm) near the top, and the crucible was covered by an alumina lid and heated at >1050°C, a hollow polycrystal composed of needlelike, ribbon(comb)-like, dendritic, and bulk zinc oxide crystals grew from the hole toward the outside of the crucible. The diameter and length of the polycrystal grown at 1050°C after 1 h were ∼2.2 mm and ∼20 cm, respectively. The diameter increased, while the length decreased, with increasing temperature. Most of the needlelike zinc oxide crystals in the hollow polycrystal were elongated along the c -axis.     

On the accuracy and efficiency of substrate current calculationsfor sub-μm n-MOSFET's

The accuracy and efficiency of the self-consistent (regarding the electric field) Monte Carlo model, nonself-consistent Monte Carlo model, and the soft-threshold lucky electron model (LEM) for the calculation of substrate currents in deep sub-μm n-MOSFET's are investigated. While the two Monte Carlo models are in good agreement with the experiment, the simpler LEM model still gives reasonable results even for a 0.16 μm n-MOSFET. On the other hand, huge differences in the CPU time consumption are found and the LEM is about four orders of magnitude faster than the self-consistent Monte Carlo simulations. The nonself-consistent calculations are only one order of magnitude slower than the LEM. The good agreement with the experiment is obtained without considering the so-called surface impact ionization or any fitting of parameters on the device level