Defining Dry Eye from a Clinical Perspective

Over the past decades, the number of patients with dry eye disease (DED) has increased dramatically. The incidence of DED is higher in Asia than in Europe and North America, suggesting the involvement of cultural or racial factors in DED etiology. Although many definitions of DED have been used, discrepancies exist between the various definitions of dry eye disease (DED) used across the globe. This article presents a clinical consensus on the definition of DED, as formulated in four meetings with global DED experts. The proposed new definition is as follows: “Dry eye is a multifactorial disease characterized by a persistently unstable and/or deficient tear film (TF) causing discomfort and/or visual impairment, accompanied by variable degrees of ocular surface epitheliopathy, inflammation and neurosensory abnormalities.” The key criteria for the diagnosis of DED are unstable TF, inflammation, ocular discomfort and visual impairment. This definition also recommends the assessment of ocular surface epitheliopathy and neurosensory abnormalities in each patient with suspected DED. It is easily applicable in clinical practice and should help practitioners diagnose DED consistently. This consensus definition of DED should also help to guide research and clinical trials that, to date, have been hampered by the lack of an established surrogate endpoint.     

Effect of chitosan feeding on intestinal bile acid metabolism in rats

The effect of chitosan feeding (for 21 days) on intestinal bile acids was studied in male rats. Serum cholesterol levels in rats fed a commercial diet low in cholesterol were decreased by chitosan supplementation. Chitosan inhibited the transformation of cholesterol to coprostanol without causing a qualitative change in fecal excretion of these neutral sterols. Increased fiber consumption did not increase fecal excretion of bile acids, but caused a marked change in fecal bile acid composition. Litcholic acid increased sigificantly, deoxycholic acid increased to a leasser extent, whereas hyodeoxycholic acid and the 6β-isomer and 5-epimeric 3α-hydroxy-6-keto-cholanoic acid(s) decreased. The pH in the cecum and colon became elevated by chitosan feeding which affected the conversion of primary bile acids to secondary bile acids in the large intestine. In the cecum, chitosan feeding increased the concentration of α-,β-, and ω-muricholic acids, and lithocholic acid. However, the levels of hyodeoxycholic acid and its 6β-isomer, of monohydroxy-monoketo-cholanoic acids, and of 3α, 6ξ, 7ξ-trihydroxy-cholanoic acid decreased. The data suggest that chitosan feeding affects the metabolism of intestinal bile acids in rats.     

Liquid crystalline side-chain polysiloxanes containing mesogenic groups attached by esterification

Summary Liquid crystalline side-chain polysiloxanes were prepared without metal complex catalyst. Mesogenic groups such as cholesteryl, 4-cyano-4-biphenyl and 4-methoxy-4-biphenyl group were introduced into polysiloxane by esterification and from DSC measurements they were compatible with other liquid crystalline polysiloxanes reported previously.     

The steric effect of exfoliation agent for fabrication of layer niobium oxide nanosheet

In this research, the steric effect of an exfoliation agent between n-ethylamine and triethylamine for the fabrication of Ca₂Nb₃O₁₀⁻ nanosheet was investigated. The experimental results revealed that the different structures of the exfoliation agent have affected to fabrication of Ca₂Nb₃O₁₀⁻ nanosheet. The use of n-ethylamine as an exfoliation agent gave a maximum exfoliation efficiency of 10 wt.% while the maximum exfoliation efficiency of triethylamine was 90 wt.%. The result showed that the difference in exfoliation efficiency was caused by the steric effect of exfoliation agents. The image of transmission electron microscopy exhibited Ca₂Nb₃O₁₀⁻ nanosheets which were formed by exfoliation of HCa₂Nb₃O₁₀. Furthermore, the reaction time for liquid exfoliation was studied in this work. The reaction time at 4 h gave a maximum of exfoliation efficiency. The Ca₂Nb₃O₁₀⁻ suspension was tested capability to remove hazardous ions. After the experiment, we found the white precipitate which was the formation of CsCa₂Nb₃O₁₀. The result showed that the Ca₂Nb₃O₁₀⁻ nanosheet was efficient for the removal of Cs⁺ ions in the wastewater.     

Production of finely ground natural graphite particles with high electrical conductivity by controlling the grinding atmosphere

Natural graphite particles with high crystallinity sieved to obtain a particle size range of under 63 μm were ground with a ball mill, under various well-controlled grinding atmospheres such as N₂, O₂, He, H₂, and vacuum. The ratio, X_dif50/X_st50, i.e. between the 50 wt.% Stokes diameter and the 50 wt.% laser diffraction diameter, of the ground particles, was used as an index of the flakiness of the particles. The specific resistance of films composed of the ground graphite particles was systematically measured. The rate of reduction in the size of the particles by grinding was slow under an O₂-rich atmosphere such as 100% O₂ and dry air. On the other hand, it was relatively fast in vacuum, or under an N₂ or He atmosphere, and a gas mixture of 99% N₂ and 1% O₂. The rate of size reduction by grinding under a H₂ atmosphere was intermediate. In our experimental conditions, the flakiness of the ground particles increased with the decrease in the particles’ sizes. The electrical conductivity of the ground particles, however, tended to decrease with the decrease in their sizes. Under the condition that the Stokes diameter of the ground particles remains constant, the electrical conductivity of films made from the ground particles increases with the increase in the flakiness of the particles. It was finally determined from our systematic grinding experiments that small flaky particles, which had a size, X_st of ∼1 μm, with a high electrical conductivity can be produced by grinding in a gas mixture of 99% N₂ and 1% O₂. In this case, the flaky shape of the ground particles was visually confirmed by scanning electron microscopy.     

Allelopathy of oats. II. Allelochemical effect ofl-Tryptophan and its concentration in oat root exudates

l-Tryptophan caused growth inhibition of roots and hypocotyls (or coleoptiles) of cockscomb (Amaranthus caudatus L.), lettuce (Lactuca sativa L.), cress (Lepidium sativum L.), timothy (Phleum pratense L.), rice (Oryza sativa L.), wheat (Triticum aestivum L.), and oat (Avena sativa L.), increasing the dose ofl-tryptophan increased the inhibition. The concentrations for 50% inhibition of the root growth were 0.14, 0.15, 0.21, 0.79, 0.95, 1.7, and 2.4 mM for cockscomb, cress, lettuce, timothy, rice, wheat, and oat, respectively; the concentrations for 40% inhibition of the hypocotyl (or coleoptile) growth were 0.28, 0.33, 0.43, 2.7, 4.5, 7.2, and 15 mM for cockscomb, cress, lettuce, timothy, rice, wheat and oat, respectively. The levels ofl-tryptophan in oat seedlings and in its root exudates were 29.3 mg/kg fresh wt and 0.25 mM under light conditions, and 21.1 mg/kg fresh wt and 0.18 mM under dark conditions, respectively. The presence ofl-tryptophan in the root exudates coupled with its effect on growth suggested thatl-tryptophan may play an important role in the growth inhibition of other plants in nature.     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Phase separation and dewetting in polystyrene/poly(vinyl methyl ether) blend thin films in a wide thickness range

Phase separation and dewetting processes of blend thin films of polystyrene (PS) and poly(vinyl methyl ether) (PVME) in two phase region have been studied in a wide film thickness range from 65 μm to 42 nm (∼2.5R_g, R_g being radius of gyration of a polymer) using optical microscope (OM), atomic force microscope (AFM) and small-angle light scattering (LS). It was found that both phase separation and dewetting processes depend on the film thickness and were classified into four thickness regions. In the first region above ∼15 μm the spinodal decomposition (SD) type phase separation occurs in a similar manner to bulk and no dewetting is observed. This region can be regarded as bulk. In the second region between ∼15 and ∼1 μm, the SD type phase separation proceeds in the early stage while the characteristic wavelength of the SD decreases with the film thickness. In the late stage dewetting is induced by the phase separation. In the third region between ∼1 μm and ∼200 nm the dewetting is observed even in the early stage. The dewetting morphology is very irregular and no definite characteristic wavelength is observed. It is expected that the irregular morphology is induced by mixing up the characteristic wavelengths of the phase separation and the dewetting. In the fourth region below ∼200 nm the dewetting occurs after a long incubation time with a characteristic wavelength, which decreases with the film thickness. It is considered that the layered structure is formed in the thin film during the incubation period and triggers the dewetting through the capillary fluctuation mechanism or the composition fluctuation one.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.