Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

A study of reactor neutrino monitoring at the experimental fast reactor JOYO

We carried out a study of neutrino detection at the experimental fast reactor JOYO using a 0.76 tons gadolinium loaded liquid scintillator detector. The detector was set up on the ground level at 24.3 m from the JOYO reactor core of 140 MW thermal power. The measured neutrino event rate from reactor on-off comparison was 1.11±1.24(stat.)±0.46(syst.) events/day. Although the statistical significance of the measurement was not enough, backgrounds in such a compact detector at the ground level were studied in detail and MC simulations were found to describe the data well. A study for improvement of the detector for future such experiments is also shown.     

Nanowrinkled and Nanoporous Polyethylene Membranes Via Entanglement Arrangement Control

Crystalline homopolymers, including polyethylene (PE), which has the simplest architecture, form a nanometer‐sized combination of crystalline and amorphous components, but their arrangement control, similar to self‐assembled phase‐separation of block‐copolymers, is usually difficult. However, molecular entanglements trapped between crystalline and amorphous components of homopolymers coincide with the segmental linking points on the interfaces of the microphase separation for block copolymers. Nanowrinkled PE membranes are prepared with a network of 30 nm‐thick homogeneous lamellae using a novel entanglement control technique composed of biaxial melt‐drawing and melt‐shrinking procedures, which are limited for highly entangled ultrahigh molecular weight materials. Such a network arrangement of nanowrinkling lamellae spreading on membrane surface and also across the membrane thickness improves the mechanical properties of both tensile strength and tearing strength. Subsequent cold‐drawing causes delamination of the lamellar interfaces, leading to the resultant nanoporous morphology composed of passing‐through channels that are several tens of nanometers in diameter, without any solvent processing.     

Blood Pressure Elevation of Tubular Specific (P)RR Transgenic Mice and Lethal Tubular Degeneration due to Possible Intracellular Interactions between (P)RR and Alternative Renin Products

The prorenin/renin receptor ((P)RR) is a multifunctional protein that is widely distributed in various organs. Despite intensive research for more than 20 years, this receptor has not been fully characterized. In this study, we generated mice overexpressing the tubular epithelial (P)RR gene ((P)RR-TG mice) to test the previously reported functional role of (P)RR by Ramkumar et al. in 2015 using tubular specific (P)RR KO mice. (P)RR-TG mice were maintained and analyzed in individual metabolic cages and were administered angiotensin II blocker (ARB), direct renin inhibitor (DRI), and bafilomycin, that is, vacuolar ATPase (V-ATPase) antagonist. (P)RR-TG mice were hypertensive and had alkalized urine with lower osmolality and Na⁺ excretion. ARB and DRI, but not bafilomycin, concurrently decreased blood pressure. Bafilomycin acidized urine of (P)RR-TG mice, or equivalently this phenomenon restored the effect of overexpressed transgene, suggesting that (P)RR functioned as a V-ATPase in renal tubules. Afterall, (P)RR-TG mice were mated with alternative renin transgenic mice (ARen2-TG), which we identified as intracellular renin previously, to generate double transgenic mice (DT-TG). Lethal renal tubular damage was observed in DT-TG mice, suggesting that intracellular renin may be a ligand for (P)RR in tubules. In summary, (P)RR did not substantially affect the tissue renin-angiotensin system (RAS) in our model of tubular specific (P)RR gene over-expression, but alternative intracellular renin may be involved in (P)RR signaling in addition to conventional V-ATPase function. Further investigations are warranted.     

Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

Sterol composition of 19 vegetable oils

The unsaponifiables from 19 vegetable oils were divided into a sterol and three other fractions by thin-layer chromatography. All except olive and palm kernel oils gave the sterol fraction in a large quantity. Compositions of the sterol fractions were determined by gas liquid chromatography. Identification of each sterol was carried out by gas liquid chromatography and combined gas chromatograph-mass spectrometry. Campesterol, stigmasterol and β-sitosterol were present in all oils, and a minor amount of cholesterol in majority of the oils. Brassicasterol occurrence was widespread but its content was extremely small in oils other than rapeseed oil. Other sterols, presumably δ⁷-stigmastenol and δ⁵- and δ⁷-avenasterol were detected in most of the oils.     

Sterols,methylsterols, and triterpene alcohols in threeTheaceae and some other vegetable oils

The unsaponifiables from threeTheaceae (Camellia japonica L.,Camellia Sasanqua Thunb., andThea sinensis L.) oils and alfalfa, garden balsam, and spinach seed oils and shea fat were separated into four fractions: sterols, 4-methylsterols, triterpene alcohols, and less polar compounds by thin layer chromatography. While the sterol fraction was the major one for the unsaponifiables from alfalfa and spinach seed oils, the triterpene alcohol fraction was predominant for the unsaponifiables from all other oils. The sterol, 4-methylsterol, and triterpene alcohol fractions were analyzed by gas chromatography. All the sterol fractions were alike in their compositions, consisting exclusively of Δ⁷-sterols, such as α-spinasterol and Δ⁷-stigmastenol as predominant components together with Δ⁷-avenasterol and 24-methylcholest-7-enol. Obtusifoliol, gramisterol (occasionally accompanied with cycloeucalenol), and citrostadienol, together with several other unidentified components, were found in the 4-methylsterol fractions from all of the oils except shea fat. The 4-methylsterol fraction from shea fat showed a characteristic composition containing a large proportion of unidentified components which had relative retention time greater than that of citrostadienol, while no citrostadienol was detected. β-Amyrin, lupeol, and butyospermol were major components of the triterpene alcohol fractions from most of the oils, but the fraction from spinach seed oil contained cycloartenol and 24-methylene-cycloartanol as predominant components. There is a close similarity in the compositions of unsaponifiables (sterols, 4-methylsterols, and triterpene alcohols) of the threeTheaceae oils. Two sterols, α-spinasterol and Δ⁷-stigmastenol, and five triterpene alcohols were isolated from tea seed oil. Moreover, five unidentified components beside parkeol, butyrospermol, α-amyrin, and lupeol were isolated from the triterpene alcohol fraction of shea fat.     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.