Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

Effect of poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group as a steric stabilizer on dispersion polymerization of styrene

In dispersion polymerization of styrene in ethanol, effects of a reactive steric stabilizer, poly(vinyl acetate/vinyl alcohol) copolymer with a thiol end group (P(VAc/VA)-SH), were investigated. In the absence of the thiol end group, the dispersion coagulated at the middle stage of the polymerization, while in the presence of the thiol end group, the polymerization proceeded successfully to result in close to monodisperse particles. The reactive thiol group acts as a site of formation of the block copolymer, that is, polystyrene-b-P(VAc/VA), which is utilized as an effective dispersant. From the measurement on molecular weights during the course of polymerization, two polymerization loci were realized. Addition of butyl methacrylate to styrene affected markedly not only rate of polymerization but also particle size. © 1996 John Wiley & Sons, Inc.     

Blood Pressure Elevation of Tubular Specific (P)RR Transgenic Mice and Lethal Tubular Degeneration due to Possible Intracellular Interactions between (P)RR and Alternative Renin Products

The prorenin/renin receptor ((P)RR) is a multifunctional protein that is widely distributed in various organs. Despite intensive research for more than 20 years, this receptor has not been fully characterized. In this study, we generated mice overexpressing the tubular epithelial (P)RR gene ((P)RR-TG mice) to test the previously reported functional role of (P)RR by Ramkumar et al. in 2015 using tubular specific (P)RR KO mice. (P)RR-TG mice were maintained and analyzed in individual metabolic cages and were administered angiotensin II blocker (ARB), direct renin inhibitor (DRI), and bafilomycin, that is, vacuolar ATPase (V-ATPase) antagonist. (P)RR-TG mice were hypertensive and had alkalized urine with lower osmolality and Na⁺ excretion. ARB and DRI, but not bafilomycin, concurrently decreased blood pressure. Bafilomycin acidized urine of (P)RR-TG mice, or equivalently this phenomenon restored the effect of overexpressed transgene, suggesting that (P)RR functioned as a V-ATPase in renal tubules. Afterall, (P)RR-TG mice were mated with alternative renin transgenic mice (ARen2-TG), which we identified as intracellular renin previously, to generate double transgenic mice (DT-TG). Lethal renal tubular damage was observed in DT-TG mice, suggesting that intracellular renin may be a ligand for (P)RR in tubules. In summary, (P)RR did not substantially affect the tissue renin-angiotensin system (RAS) in our model of tubular specific (P)RR gene over-expression, but alternative intracellular renin may be involved in (P)RR signaling in addition to conventional V-ATPase function. Further investigations are warranted.     

Determination of hyoscyamine and scopolamine in serum and urine of humans by liquid chromatography with tandem mass spectrometry

A simple method was developed for the analysis of hyoscyamine and scopolamine in human serum and urine using liquid chromatography with tandem mass spectrometry (LC/MS/MS). Hyoscyamine and scopolamine in serum and urine were cleaned up with an Oasis HLB cartridge and a PSA cartridge. The LC separation was carried out on an ODS column, using linear gradient elution with 5 mmol/L IPCC-MS3-methanol as the mobile phase. The mass spectral acquisition was done in the positive ion mode by applying selected reaction monitoring (SRM). The recoveries of hyoscyamine and scopolamine were 86.0-105% from human serum and urine fortified at 0.2 ng/mL and 10 ng/mL. The detection limits of hyoscyamine and scopolamine were 0.02 ng/mL. Four serum and three urine samples of humans poisoned by eating Datura innoxia Mill. were analyzed by this method. Hyoscyamine and scopolamine were detected at the levels of 0.45-3.5 ng/mL in all serum samples and 170-670 ng/mL in all urine samples.     

Direct ethanol production from barley beta-glucan by sake yeast displaying Aspergillus oryzae beta-glucosidase and endoglucanase

Three beta-glucosidase- and two endoglucanase-encoding genes were cloned from Aspergillus oryzae, and their gene products were displayed on the cell surface of the sake yeast, Saccharomyces cerevisiae GRI-117-UK. GRI-117-UK/pUDB7 displaying beta-glucosidase AO090009000356 showed the highest activity against various substrates and efficiently produced ethanol from cellobiose. On the other hand, GRI-117-UK/pUDCB displaying endoglucanase AO090010000314 efficiently degraded barley beta-glucan to glucose and smaller cellooligosaccharides. GRI-117-UK/pUDB7CB codisplaying both beta-glucosidase AO090009000356 and endoglucanase AO090010000314 was constructed. When direct ethanol fermentation from 20 g/l barley beta-glucan as a model substrate was performed with the codisplaying strain, the ethanol concentration reached 7.94 g/l after 24 h of fermentation. The conversion ratio of ethanol from beta-glucan was 69.6% of the theoretical ethanol concentration produced from 20 g/l barley beta-glucan. These results showed that sake yeast displaying A. oryzae cellulolytic enzymes can be used to produce ethanol from cellulosic materials. Our constructs have higher ethanol production potential than the laboratory constructs previously reported.     

Ether lipids based on the glyceryl ether skeleton: Present state,future potential

Lipids from natural sources consist mainly of saponifiable substances, such as glycerides, along with some unsaponifiable lipids, some of which are ether lipids. Typical ether lipids are monoalkyl ethers of glycerin, also called alkyl/alkenyl glyceryl ethers. Alkyl/alkenyl glyceryl ethers have also been reported in marine organisms and in human feces. Several chemical syntheses of such ether lipids have been reported. Typical examples are alkyl glyceryl ether formation by the addition reaction of alkyl glycidyl ether and the telomerization reaction of butadiene with glycerin and a transition metal catalyst. Characteristic chemical structures, such as terpene alkyl glyceryl ethers, archaebacterial macrocyclic ether lipids, and glyceryl ethers of condensed cyclic planar molecules, have been obtained as well. Over the past few decades, industry has shown much interest in the chemistry and application of highly branched fatty acids. For example, isostearyl glyceryl ether (GE-IS) with methyl branching in the middle chain was already known, but it is now prepared at an industrial scale by proprietary alkyl glycidyl ether methods. The characteristic behavior of GE-IS toward water, such as formation of water-in-oil emulsions containing large amounts of water and of liquid crystals, has made it applicable for use in hair and skin-care cosmetics. Based on these studies and considerations, glyceryl ether lipids, which are rarely investigated, may become one of the most important and useful lipids in the industry.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

The Pathogenesis of Cardiac Fibrosis: A Review of Recent Progress

Fibrosis is defined as the excessive deposition of extracellular matrix (ECM) proteins in the interstitium. It is an essential pathological response to chronic inflammation. ECM protein deposition is initially protective and is critical for wound healing and tissue regeneration. However, pathological cardiac remodeling in excessive and continuous tissue damage with subsequent ECM deposition results in a distorted organ architecture and significantly impacts cardiac function. In this review, we summarized and discussed the histologic features of cardiac fibrosis with the signaling factors that control it. We evaluated the origin and characteristic markers of cardiac fibroblasts. We also discussed lymphatic vessels, which have become more important in recent years to improve cardiac fibrosis.     

Elongation and Contraction of Scallop Sarcoplasmic Reticulum (SR): ATP Stabilizes Ca2+-ATPase Crystalline Array Elongation of SR Vesicles

The Ca²⁺-ATPase is an integral transmembrane Ca²⁺ pump of the sarcoplasmic reticulum (SR). Crystallization of the cytoplasmic surface ATPase molecules of isolated scallop SR vesicles was studied at various calcium concentrations by negative stain electron microscopy. In the absence of ATP, round SR vesicles displaying an assembly of small crystalline patches of ATPase molecules were observed at 18 µM [Ca²⁺]. These partly transformed into tightly elongated vesicles containing ATPase crystalline arrays at low [Ca²⁺] (≤1.3 µM). The arrays were classified as ‘’tetramer’’, “two-rail” (like a railroad) and ‘’monomer’’. Their crystallinity was low, and they were unstable. In the presence of ATP (5 mM) at a low [Ca²⁺] of ~0.002 µM, “two-rail” arrays of high crystallinity appeared more frequently in the tightly elongated vesicles and the distinct tetramer arrays disappeared. During prolonged (~2.5 h) incubation, ATP was consumed and tetramer arrays reappeared. A specific ATPase inhibitor, thapsigargin, prevented both crystal formation and vesicle elongation in the presence of ATP. Together with the second part of this study, these data suggest that the ATPase forms tetramer units and longer tetramer crystalline arrays to elongate SR vesicles, and that the arrays transform into more stable “two-rail” forms in the presence of ATP at low [Ca²⁺].     

Effects of V content on hydrogen storage properties of V–Ti–Cr alloys with high desorption pressure

Hydrogen storage is one of the most important issues to realize hydrogen society especially for on-board usage. Recently, high-pressure metal hydride (MH) tank attracts many attentions due to its high volumetric hydrogen storage density and relatively easy heat management. To emphasize its merits, further improvements of properties of MH, such as capacity, hydrogen desorption capability at low temperature and durability, are required. In this paper, V–Ti–Cr alloys of V-rich compositions were investigated with perspective of increasing of hydrogen desorption pressure and durability. In both of 60at%V–Ti–Cr and 80at%V–Ti–Cr alloys, good relationship between hydrogen desorption pressure and Ti content was observed. In comparing with 60at%V–Ti–Cr alloys, 80at%V–Ti–Cr alloys showed good durability. It is quite notable that relationship between limitation line (upper substitution limit of Ti by Cr without degradation of hydrogen capacity) and desorption pressure for V–Ti–Cr ternary system with V-rich composition is clarified. And also, it is revealed that in the case of V–Ti–Cr ternary system, not only Ti/Cr ratio but also V content is important factor to obtain alloys with high hydrogen desorption pressure. 75at%V–5at%Ti–Cr as-cast sample showed good durability, hydrogen desorption capability at low temperature and relatively high effective hydrogen capacity simultaneously.