A superconducting filter to separate an oxygen and argon mixture

Hot isostatic pressing in an oxygen atmosphere, known as O₂-HIP method, has been used successfully to synthesize oxide materials, as well as to produce porous materials. In this paper a porous superconducting oxide is synthesized by this method and its application as a gas filter is described. Porous superconductors can be used to separate a mixture of paramagnetic and diamagnetic gases, such as oxygen and argon. Separation occurs after a magnetic field is applied and is based on the Meissner effect. Experimental results showed that the oxygen content of an oxygen/argon mixture increased after passing through a filter with large pore size (about 10 m).     

Prediction of color changes in acetaminophen solution using the time–temperature superposition principle

A prediction method for color changes based on the time–temperature superposition principle (TTSP) was developed for acetaminophen solution. Color changes of acetaminophen solution are caused by the degradation of acetaminophen, such as hydrolysis and oxidation. In principle, the TTSP can be applied to only thermal aging. Therefore, the impact of oxidation on the color changes of acetaminophen solution was verified. The results of our experiment suggested that the oxidation products enhanced the color changes in acetaminophen solution. Next, the color changes of acetaminophen solution samples of the same head space volume after accelerated aging at various temperatures were investigated using the Commission Internationale de l’Eclairage (CIE) LAB color space (a*, b*, L* and ΔE*ab), following which the TTSP was adopted to kinetic analysis of the color changes. The apparent activation energies using the time–temperature shift factor of a*, b*, L* and ΔE*ab were calculated as 72.4, 69.2, 72.3 and 70.9 (kJ/mol), respectively, which are similar to the values for acetaminophen hydrolysis reported in the literature. The predicted values of a*, b*, L* and ΔE*ab at 40?°C were obtained by calculation using Arrhenius plots. A comparison between the experimental and predicted values for each color parameter revealed sufficiently high R² values (>0.98), suggesting the high reliability of the prediction. The kinetic analysis using TTSP was successfully applied to predicting the color changes under the controlled oxygen amount at any temperature and for any length of time.     

Shaped silicon-crystal wafers obtained by plastic deformation and their application to silicon-crystal lenses.

Plastic deformation is an unlikely process by which to mould pristine silicon wafers into three-dimensional shapes owing to the inevitable detrimental impact that the resulting mechanically induced defects would have on their electrical properties. However, if one were to find a way of doing so without substantial degradation of these properties, a range of new applications might be opened up. Here we report on the successful plastic deformation of silicon crystal wafers for the preparation of wafers with various shapes. A silicon wafer was set between dies and pressed at high temperatures. One application of shaped wafers is as well-shaped concave silicon crystal lenses or mirrors. The lattice plane of such a crystal lens has a curvature exactly along the surface. A concave spheroidal X-ray lens, in the form of two-dimensional Johann and Johansson's monochromators, is proposed for an X-ray optical component system. We propose and demonstrate a new solar cell system with the concave silicon crystal mirror used as both a solar cell and a focused mirror. This system can make use of the reflected photons from solar cells.     

Frequency characteristics of stiffness and damping effect of ferro fluid bearing

Damping characteristics and frequency characteristics of ferro fluid bearing (FFB) spindles were measured using a high-frequency vibration base driven by a piezo actuator. Using the high-frequency vibration base, high-frequency excitation was added to ferro fluid bearing spindles mounted on the vibration base, and it was proved that ferro fluid bearing spindles have effective damping. And the damping effect became larger with higher spindle rotational speed. Also we have measured spindle runout of a ferro fluid bearing spindle using a lock-in amplifier to increase S/N ratio and succeeded to measure nano meter order displacements.     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

Effects of difructose anhydride III (DFA III) administration on rat intestinal microbiota

The effects of difructose anhydride III (di-D-fructofuranose-1,2':2,3'-dianhydride; DFA III) administration (3% DFA III for 4 weeks) on rat intestinal microbiota were examined using denaturing gradient gel electrophoresis (DGGE). According to DGGE profiles, the number of bacteria related to Bacteroides acidofaciens and uncultured bacteria within the Clostridium lituseburense group decreased, while that of bacteria related to Bacteroides vulgatus, Bacteroides uniformis and Ruminococcus productus increased in DFA III-fed rat cecum. In the cecal contents of DFA III-fed rats, a lowering of pH and an increase in short chain fatty acids (SCFAs), especially acetic acid, were observed. The DFA III-assimilating bacterium, Ruminococcus sp. M-1, was isolated from the cecal contents of DFA III-fed rats. The strain had 98% similarity with R. productus ATCC 27340T (L76595), and mainly produced acetic acid. These results confirmed that the bacteria harmful to host health were not increased by DFA III administration. Moreover, DFA III stimulated the growth of Ruminococcus sp. M-1 producing acetic acid, which may alter the intestinal microbiota towards a healthier composition. It is expected that DFA III would be a new candidate as a prebiotic.     

Influence of phosphate species on green rust I transformation and local structure and morphology of γ-FeOOH

To clarify the role of phosphate in the formation of corrosion products, the transformation of GRI(Cl⁻) with the addition of phosphate was characterized through XRD, TEM, and solution analysis. Electrochemical analysis showed that the transformation of GRI(Cl⁻) was delayed and the size of the final products, i.e., γ-FeOOH was reduced in the phosphate added case. X-ray absorption spectroscopy indicated that the neighboring Fe–Fe coordination number of FeO₆ octahedral unit in γ-FeOOH was decreased. These effects of phosphate are attributed to its adsorption on GRI(Cl⁻) and nucleated γ-FeOOH that prevented particle growth during oxidation process.