Class IIa bacteriocins from lactic acid bacteria: antibacterial activity and food preservation

In the last decade, a variety of ribosomally synthesized antimicrobial peptides, or bacteriocins, produced by lactic acid bacteria have been identified and characterized. As a result of these studies, insight has been gained into various fundamental aspects of biology and biochemistry such as bacteriocin processing and secretion, mechanisms of cell immunity, and structure-function relationships. In parallel, there has been a growing awareness that bacteriocins may be developed into useful antimicrobial food additives. Class IIa bacteriocins can be considered as the major subgroup of bacteriocins from lactic acid bacteria, not only because of their large number, but also because of their significant biological activities and potential applications. The present review provides an overview of the knowledge available for class IIa bacteriocins and discusses common features and recent findings concerning these substances. The activity and potential food applications of class IIa bacteriocins are a major focus of this review.     

Structural characterization of glycopeptides by N-terminal protein ladder sequencing

High-sensitivity and high-throughput mass spectrometry (MS) has become an important tool for characterizing glycopeptides. Here, we analyzed synthetic O-linked glycopeptides using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS. First, we applied MALDI-quadrupole ion trap (QIT)-TOF MS, which enables collision-induced dissociation-MSn analysis for fine structural characterization. Subsequent MS/MS of sodium adduct ions selected as precursor ions yielded detailed information about the site of oligosaccharide attachment as well as the carbohydrate and amino acid sequences; however, these MS/MS spectra were very complex. To obtain easily interpretable and simple spectra, we used N-terminal protein ladder sequencing coupled with MALDI-TOF MS. From the extremely simple resulting spectra, we were able to determine the glycosylation sites, amino acid sequences, and oligosaccharide molecular weights of the glycopeptides.     

Development of effective detection method for Coxiella burnetii in mayonnaise by real-time PCR and investigation of C. burnetii contamination in commercial mayonnaise in Tokyo

A PCR method for the effective detection of Coxiella burnetii in commercially available mayonnaise was developed. Sample preparations were isolated from 50 g portions of each mayonnaise product by four successive extraction steps in phosphate buffer with 2.0 M NaCl. These extracts were then centrifuged at 20,000 x g for 60 min. DNA was isolated from the solution containing the precipitate with a commercial kit, and amplified quantitatively using real-time PCR that targeted the com1 region of C. burnetii. The recoveries of C. burnetii from 2 kinds of commercial mayonnaise specimens, with a baseline control of 1 x 10(7) particles of the Nine Mile phase II strain, were 85.0 +/- 6.0% and 72.0 +/- 0.4%, respectively. The determination limit of this method was 500 C. burnetii particles per 50 g of mayonnaise. The DNA specimens isolated from 50 different commercial mayonnaise samples sold in Tokyo using this method were amplified using both nested PCR and real-time PCR. No contamination by C. burnetii was detected in any of the mayonnaise samples.     

Burning rates of liquid fuels in fire whirls

This paper presents semi-empirical investigations on the quasi-steady burning rates of laminar and turbulent fire whirls established over liquid fuel pools. The inflow boundary layer above the fuel surface consists of two regions: outer reactive region and inner non-reactive region. Based on the momentum boundary layer solutions with the applications of stagnant film model and Chilton–Colburn analogy, the burning rates are correlated with ambient circulation and pool size for laminar and turbulent fire whirls respectively. It is shown that in general pool fires the mass and heat transfers on the fuel surface are controlled by natural convection, while in fire whirls they are strongly enhanced by forced convection. Fuel evaporation rate in the outer region is relatively larger than that in the inner region. The large proportion of fuel evaporated from the outer region is mainly due to its larger area. The predictions agree well with the data from the present experiments and the literature. Furthermore, the flame height is confirmed to be proportional to the ambient circulation for both laminar and turbulent liquid fire whirls.     

Oxidation of green rust suspensions containing different chromium ion species

The oxidation of hydrosulphate green rust (GR2(SO₄²⁻)) suspension containing different chromium ion species was investigated by X-ray diffraction, X-ray absorption spectroscopy and transmission electron microscopy. The pH, oxidation-reduction potential and amount of dissolved oxygen in aqueous solutions were measured during the reactions. The results show that the addition of Cr(III)₂(SO₄)₃ solution suppresses the transformation of GR2(SO₄²⁻) into iron oxyhydroxides and oxides in aqueous solution, while the addition of Na₂Cr(VI)O₄ solution promotes the transformation of GR2(SO₄²⁻) in which Cr(VI) is reduced to Cr(III); α-FeOOH particles were refined by the addition of the chromium ions.     

Distributions of density and fission products in the reaction product between irradiated MOX fuel and molten zircaloy-2

Two- and three-dimensional images were obtained by X-ray CT in the reaction product between zircaloy-2 cladding tube and MOX fuel. The gamma-ray intensity distributions in the same specimen were also obtained by gamma-ray measurements of two fission products (Cs-137 and Eu-154) and one neutron-activated nuclide (Co-60). The average values of the fuel density (about 10.5 g/cm³) and the cladding density (about 6.55 g/cm³) were obtained in the metallic phase region by evaluation of the density distributions on two-dimensional X-ray CT images. The distributions of the crushed fuel pellet and the pores were also clearly observed in the three-dimensional X-ray CT images. The following results were found from the gamma-ray measurement. First, Cs-137 was observed in the unreacted fuel region and the pore region in the metallic phase region. Second, Eu-154 was widely distributed to all regions. Finally, Co-60 was confirmed only in the metallic phase region.     

Evaluation and Optimization of Preparative Variables for Controlled-Release Floatable Microspheres Prepared by Poor Solvent Addition Method

The aim of this study was to evaluate and optimize preparative parameters for floatable theophylline microspheres prepared by the emulsion–solvent evaporation method. A three-factor three-level Box–Behnken design was employed using amount of poor solvent, temperature-increase rate and drug loading as independent factors, and percentage floating at 3 h and time required for 50% drug release as dependent variables. Simultaneous optimization of the parameters for maximum buoyancy and desirable drug release was conducted using a partitioned artificial neural network. A microsphere using 27.6% of drug loading, 0.29°C/min of temperature-increase rate, and 1.7 mL of poor solvent was identified for maximizing buoyancy and sustaining drug release.     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Internal friction of capsule-free HIPed porous alumina

Porous alumina were sintered by conventional sintering and capsule-free Hot Isostatic Pressing (HIPing), at temperatures between 800 and 1500 °C under pressures 0.1 MPa or 200 MPa for 1 h or 50 h. Young’s modulus and internal friction of samples were measured by resonance method. The results show that Young’s modulus is mainly dominated by porosity of material. Capsule-free HIPed porous materials have slightly higher Young’s modulus than conventionally sintered ones at the same porosity. Internal friction is governed by both porosity and specific surface area. Capsule-free HIPed porous alumina has lower internal friction coefficient than conventionally sintered ones at the similar porosity or at the similar specific surface area. Enhanced surface-self diffusion under high gas pressure reduces internal friction coefficient, and affects internal friction more than Young’s modulus.