Is the Jaw Bone Micro-Structure Altered in Response to Osteoporosis and Bisphosphonate Treatment? A Micro-CT Analysis

The aim of the study was to quantify the micro-architectural changes of the jaw bone in response to ovariectomy, exposed or not to bisphosphonate treatment. A total of 47 Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and exposed to osteoporosis preventive treatment for eight weeks either with bisphosphonates (alendronate, ALN; group OVX-ALN) three days/week at a dose of 2 mg/kg or with saline solution (untreated control condition; group OVX). The bone morphometric parameters of the trabecular jaw bone were assessed using ex vivo micro-computed tomography. The regions of interest investigated in the maxilla were the inter-radicular septum of the second molar and the tuber. The regions quantified in the mandible included the three molar regions and the condyle. A one-way analysis of variance followed by pairwise comparison using Tukey’s HSD and the Games–Howell test was conducted to explore significant differences between the groups. In the maxilla, OVX decreased the bone volume in the inter-radicular septum of the second molar. Bisphosphonate treatment was able to prevent this deterioration of the jaw bone. The other investigated maxillary regions were not affected by (un)treated ovariectomy. In the mandible, OVX had a significant negative impact on the jaw bone in the buccal region of the first molar and the inter-radicular region of the third molar. Treatment with ALN was able to prevent this jaw bone loss. At the condyle site, OVX significantly deteriorated the trabecular connectivity and shape, whereas preventive bisphosphonate treatment showed a positive effect on this trabecular bone region. No significant results between the groups were observed for the remaining regions of interest. In summary, our results showed that the effects of ovariectomy-induced osteoporosis are manifested at selected jaw bone regions and that bisphosphonate treatment is capable to prevent these oral bone changes.     

M- S-H formation in MgO-SiO2slurries via wet milling for magnesia based castables

It is believed that the formation of hydration phase, MgO-SiO₂-H₂O (M-S-H), contributes to good workability and reliable comprehensive properties for magnesia based castables. In order to stimulate the formation of M-S-H in magnesia based castables and understand the minimum introduction of microslica amount, wet milling process was used to promote the dissolution of MgO and SiO₂ in this work. The slurry containing different content of microsilica with wet milling technology and the castables with/without wet milling slurry were prepared. The effects of microsilica content on the formation of hydration phases were analyzed by XRD, FT-IR and TG/DSC and the properties of magnesia based castables were evaluated by explosion resistance, CMOR, HMOR and so on. The results showed that the formation of M-S-H was accelerated because of the dissolution of Mg²⁺ and HSiO₃^? in wet milling process. Higher amount of M-S-H led to a tight bonding in the early stage, and a denser structure after firing at high temperature due to the limited formation of brucite and in-situ formation of evenly distributed forsterite phase. In addition, much higher HMOR were obtained when less microsilica was added, attributing to the suppressed formation of low-melting-point liquid. Therefore, 2–3 wt% microsilica addition was recommended in this process.     

Facile Suzuki coupling over ortho-metalated palladium(II) complex anchored on 2D-hexagonal mesoporous organosilica

Phenyl functionalized 2D-hexagonal mesoporous silica material has been synthesized by cationic/non-ionic mixed surfactant templating route. The phenyl group of this mesoporous material is further functionalized via nitration and then reduction of that nitro group to amino functionality, followed by Schiff base condensation and heterogenization of a palladium(II) complex, yielded an ortho-metalated palladium(II) complex anchored in a ordered mesoporous silica matrix. This supported metal complex acts as an efficient catalyst in the Suzuki cross-coupling reaction and shows high selectivity for the bi-aryl products.     

Lossy magnetic energy storage units for improvement in automatic generation control

Fast-acting energy storage devices can effectively damp electromechanical oscillations in a power system, because they provide storage capacity in addition to kinetic energy of the generator rotor, which can share the sudden changes in power requirement. Earlier studies showed the effectiveness of superconducting magnetic energy storage (SMES) for this purpose. The present paper analyses the characteristics of lossy magnetic energy storage (LMES) and shows the effectiveness of small-sized LMES units in improving power system transient response. Computer studies show that the optimal parameter settings of the power system are changed with the addition of an energy storage element.     

Wavelet domain analysis for identification of vehicle axles from bridge measurements

Bridge weigh-in-motion (B-WIM) is a process by which the axle and gross vehicle weights of vehicles travelling at highway speeds can be determined from instrumented bridges. The traditional method of attaching strain transducers to the soffit of the bridge and placing axle detectors on the road surface has been replaced here by using additional transducers underneath the bridge for axle detection and nothing-on-the-road (NOR). This paper presents a wavelet based analysis of strain signals and shows the efficacy of using wavelets in pattern recognition of these signals. The transformed signals are used to identify axle passage and hence the vehicle velocity and the axle spacing. In addition to numerically generated strains, signals acquired from such a NOR instrumentation of a bridge in Slovenia have been analysed by the method of wavelet transformation to extract axle position information that was not readily detectable using existing methods.     

The Structure And Properties of a Thermo‐mechanically Processed Low Carbon High Strength Steel

Research efforts were given towards development of low carbon high strength steels since recent past. The present study deals with the development of a low carbon high strength steel alloyed with Mn, Ni, Mo, Cu and microalloyed with Ti and Nb. The steel was subjected to three stage controlled rolling operation followed by accelerated cooling. The structure and properties of the steel at various processing conditions were evaluated. Microstructural observation reveals predominantly lath martensite along with twinned martensite structure at all processing conditions. High strength values at higher finish rolling temperatures have been obtained due to fine martensitic structure along with tiny precipitates of microalloying carbide and carbonitride. The strength value increases marginally at lower finishing temperature due to comparatively finer lath size of martensite and increased precipitation density of carbides, carbonitrides along with Cu particles. The variation in impact toughness properties at different finish rolling temperatures is found to be negligible at ambient and subambient temperatures. The formation of stable and large TiN/TiCN particles during casting have impaired the impact toughness values at ambient and at ‐40°C temperatures.     

Swing-up and stabilization of a cart–pendulum system under restricted cart track length

This paper describes the swing-up and stabilization of a cart–pendulum system with a restricted cart track length and restricted control force using generalized energy control methods. Starting from a pendant position, the pendulum is swung up to the upright unstable equilibrium configuration using energy control principles. An “energy well” is built within the cart track to prevent the cart from going outside the limited length. When sufficient energy is acquired by the pendulum, it goes into a “cruise” mode when the acquired energy is maintained. Finally, when the pendulum is close to the upright configuration, a stabilizing controller is activated around a linear zone about the upright configuration. The proposed scheme has worked well both in simulation and a practical setup and the conditions for stability have been derived using the multiple Lyapunov functions approach.     

Chemically deposited zinc oxide thin film gas sensor

Zinc oxide (ZnO) thin films were prepared by a low cost chemical deposition technique using sodium zincate bath. Structural characterizations by X-ray diffraction technique (XRD) and scanning electron microscopy (SEM) indicate the formation of ZnO films, containing 0.05–0.50 m size crystallites, with preferred c-axis orientation. The electrical conductance of the ZnO films became stable and reproducible in the 300–450 K temperature range after repeated thermal cyclings in air. Palladium sensitised ZnO films were exposed to toxic and combustible gases e.g., hydrogen (H₂), liquid petroleum gas (LPG), methane (CH₄) and hydrogen sulphide (H₂S) at a minimum operating temperature of 150 °C; which was well below the normal operating temperature range of 200–400 °C, typically reported in literature for ceramic gas sensors. The response of the ZnO thin film sensors at 150 °C, was found to be significant, even for parts per million level concentrations of CH₄ (50 ppm) and H₂S (15 ppm).     

A selective review of the finite element-ABC and the finite element-boundary integral methods for electromagnetic scattering

Annals of Telecommunications - This paper reviews two hybrid (frequency domain) finite element methods for electromagnetic scattering applications. Specifically, the progress over the last five...