Incremental cell formation considering alternative machines

Many algorithms for cell formation have been developed for past three decades in cellular manufacturing. Some use binary data for cell formation and others use production data such as operation sequence, processing times, production volumes, etc. for cell formation. All these algorithms assume that the conversion of job shop to cellular manufacturing is performed comprehensively. (In other words, they assume that all the cells are formed at a time.) However, this is far from reality. In practice, cell formation is done incrementally, one after the other, rather than comprehensively. None of the algorithms developed so far addresses the issue of incremental cell formation. In this paper, the incremental cell formation problem is defined and various categories of problems are mentioned. One type of those categories is selected for solving. Two methods, namely the branch and bound technique and a heuristic based on a multistage programming approach, have been applied to solve the chosen problem. Data sets have been generated to compare these two methods in terms of quality of solution and demand on computational time. It has been found that the branch and bound technique gives a superior quality solution, but is computationally more demanding, where as heuristic based on a multistage programming approach is computationally far superior.     

A new approach of sizing battery energy storage system for smoothing the power fluctuations of a PV/wind hybrid system

In this paper, a new approach for optimally sizing the storage system employing the battery banks for the suppression of the output power fluctuations generated in the hybrid photovoltaic/wind hybrid energy system. At first, a novel multiple averaging technique has been used to find the smoothing power that has to be supplied by the batteries for the different levels of smoothing of output power. Then the battery energy storage system is optimally sized using particle swarm optimization according to the level of smoothing power requirement, with the constraints of maintaining the battery state of charge and keeping the energy loss within the acceptable limits. Two different case studies have been presented for different locations and different sizes of the hybrid systems in this work. The results of the simulation studies and detailed discussions are presented at the end to portrait the effectiveness of the proposed method for sizing of the battery energy storage system. Copyright © 2016 John Wiley & Sons, Ltd.     

Radiation dose from dissolved radon in potable waters of the Bangalore environment,South India

Potable waters from various locations of the Bangalore environment were investigated for their ²²²Rn concentrations by the emanometry method. About 94 groundwater (borewell) samples were analysed for ²²²Rn concentrations and found to vary in the range 5.3–283.4 Bq L^?1 with a mean value of 87 Bq L^?1. Frequency distribution showed the ²²²Rn concentration in a large number of samples in the range of 0–50 Bq L^?1. From the measured concentrations, the effective doses (lung and stomach) for the population of the region were estimated. The effective dose was found to vary from 42.6 to 2280.2 µSv y^?1 with a mean value 702.5 µSv y^?1. The effect of boiling of water showed a drastic reduction in the ²²²Rn concentration. The results of the present investigation are systematically analysed, compared with the literature values and discussed.     

A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment

Cellulose nanofibers (CNFs) were isolated from kenaf fibers and wheat straw by formic acid (FA)/acetic acid (AA), peroxyformic acid (PFA)/peroxyacetic acid (PAA), hydrogen peroxide (H₂O₂) treatment; and subsequently through ball milling treatment. Characterization of extracted cellulose and cellulose nanofibers was carried out through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). TEM images showed that extracted cellulose nanofibers had diameter in the range of 8–100 nm. FTIR and XRD results implied that hemicellulose and lignin were mostly removed from lignocellulosic biomass with an increase in crystallinity, and isolation of cellulose nanofibers was successful. The TGA results showed that decomposition temperature of cellulose nanofibers increased by about 27°C when compared with that of untreated lignocellulosic biomass. No significant change was observed in the decomposition temperature of bleached celluloses after ball milling. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42990.     

Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements

The incorporation of carbon nanofiber (CNF) into glass fiber (GF) composites is a potential route to extend polymer composite service‐life and enhance mechanical properties. Under nonstatic conditions, only limited information concerning water uptake and contaminant release properties of nanocomposite materials is currently available. Polyester composites containing GF and oxidized CNF were immersed in water for 30 days under nominal pressure at 23 °C, below the polymer's glass‐transition temperature. Water was analyzed and changed every three days to simulate water chemistry regeneration similar to exposures in flowing systems. Composites with oxidized CNF had greater water sorption capacity and leaching rates than CNF‐free composites. The total mass of organic contaminant released correlated with the amount of water sorbed by each composite (r² = 0.91), although CNF dispersion was found to vary greatly within composites. The greatest and least contaminant release rates were found for the polyester‐CNF and the polyester‐GF composites, respectively. While volatile aromatic resin solvents and stabilizer compounds were detected, their concentrations declined over the 30 day exposure period. We hypothesize that the hydrophilic nature of the oxidized CNF increased the water sorption capacity of the polyester composites. Additional studies are warranted that examine the impact of this phenomenon on composite mechanical and long‐term durability properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43724.     

Soluble‐eggshell‐membrane‐protein‐modified porous silk fibroin scaffolds with enhanced cell adhesion and proliferation properties

In this study, a porous silk fibroin (SF) scaffold was modified with soluble eggshell membrane protein (SEP) with the aim of improving the cell affinity properties of the scaffold for tissue regeneration. The pore size and porosity of the prepared scaffold were in the ranges 200–300 μm and 85–90%, respectively. The existence of SEP on the scaffold surface and the structural and thermal stability were confirmed by energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The cell culture study indicated a significant improvement in the cell adhesion and proliferation of mesenchymal stem cells (MSCs) on the SF scaffold modified with SEP. The cytocompatibility of the SEP‐conjugated SF scaffold was confirmed by a 3‐(4,5‐dimethyltriazol‐2‐y1)‐2,5‐diphenyl tetrazolium assay. Thus, this study demonstrated that the biomimic properties of the scaffold could be enhanced by surface modification with SEP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40138.     

Mitigation of Major Peanut Allergens by Pulsed Ultraviolet Light

Peanut allergy represents one of the most severe IgE-mediated reactions with food, but to date, the only effective way to prevent peanut allergy is total avoidance. If allergens could be mitigated during food processing before a product reaches the consumer, this would substantially lessen the food allergy problem. The efficacy of pulsed ultraviolet light (PUV), a novel food processing technology, on reducing peanut allergens, was examined. This study revealed for the first time that PUV was also capable of deactivating Ara h 2, the most potent allergenic protein of peanut. Protein extracts from raw and roasted peanuts were treated for 2, 4, and 6?min and peanut butter slurry was treated for 1, 2, and 3?min in a Xenon Steripulse XL 3000? PUV system. The distance from the central axis of the lamp was varied at 10.8, 14.6, and 18.2?cm. The SDS?CPAGE showed a reduction in the protein band intensity for Ara h 1, Ara h 2, and Ara h 3 at the energy levels ranging from 111.6 to 223.2?J/cm². Reduction of the protein band intensity for peanut allergens increased with treatment time but decreased with increased distance from the PUV lamp. The ELISA for peanut extracts and peanut butter slurry showed a reduction in IgE binding of up to 12.9- and 6.7-folds, respectively, compared to control.     

Moisture diffusion through (hexadecyltrimethylammonium bromide ‐ Indian bentonite)/(vinylester) nanocomposites in artificial seawater and demineralized water

This paper compares the moisture diffusion properties of organomodified (Indian Bentonite nanoclay)/vinylester containing different amounts of nanoclay on exposure to demineralized water and artificial seawater at room temperature. Moisture uptake behavior of (Indian Bentonite)/vinylester was investigated and compared with that of neat vinylester. Addition of 5 wt% nanoclay decreased the diffusivity and permeability of vinylester in artificial seawater medium, but these diffusion parameters increased in demineralized water medium. Degradation in glass transition temperature and microhardness of the nanocomposites were much greater in specimens aged in demineralized water than in those in artificial seawater medium. Moisture diffusion behavior of the specimens was analyzed by Fick's law and the Langmuir model. The aged specimens were chemically analyzed by using infrared spectroscopy after aging for 146 days. A significant amount of leached organic species was detected in the demineralized water–aged specimens but the same was absent in those aged in artificial seawater. J. VINYL ADDIT. TECHNOL., 22:441–451, 2016. © 2015 Society of Plastics Engineers     

Graphitic mesoporous carbon as a durable fuel cell catalyst support

Highly stable graphitic mesoporous carbons (GMPCs) are synthesized by heat-treating polymer-templated mesoporous carbon (MPC) at 2600 °C. The electrochemical durability of GMPC as Pt catalyst support (Pt/GMPC) is compared with that of carbon black (Pt/XC-72). Comparisons are made using potentiostatic and cyclic voltammetric techniques on the respective specimens under conditions simulating the cathode environment of PEMFC (proton exchange membrane fuel cell). The results indicate that the Pt/GMPC is much more stable than Pt/XC-72, with 96% lower corrosion current. The Pt/GMPC also exhibits a greatly reduced loss of catalytic surface area: 14% for Pt/GMPC vs. 39% for Pt/XC-72.