Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Soluble‐eggshell‐membrane‐protein‐modified porous silk fibroin scaffolds with enhanced cell adhesion and proliferation properties

In this study, a porous silk fibroin (SF) scaffold was modified with soluble eggshell membrane protein (SEP) with the aim of improving the cell affinity properties of the scaffold for tissue regeneration. The pore size and porosity of the prepared scaffold were in the ranges 200–300 μm and 85–90%, respectively. The existence of SEP on the scaffold surface and the structural and thermal stability were confirmed by energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The cell culture study indicated a significant improvement in the cell adhesion and proliferation of mesenchymal stem cells (MSCs) on the SF scaffold modified with SEP. The cytocompatibility of the SEP‐conjugated SF scaffold was confirmed by a 3‐(4,5‐dimethyltriazol‐2‐y1)‐2,5‐diphenyl tetrazolium assay. Thus, this study demonstrated that the biomimic properties of the scaffold could be enhanced by surface modification with SEP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40138.     

Radiation dose from dissolved radon in potable waters of the Bangalore environment,South India

Potable waters from various locations of the Bangalore environment were investigated for their ²²²Rn concentrations by the emanometry method. About 94 groundwater (borewell) samples were analysed for ²²²Rn concentrations and found to vary in the range 5.3–283.4 Bq L^?1 with a mean value of 87 Bq L^?1. Frequency distribution showed the ²²²Rn concentration in a large number of samples in the range of 0–50 Bq L^?1. From the measured concentrations, the effective doses (lung and stomach) for the population of the region were estimated. The effective dose was found to vary from 42.6 to 2280.2 µSv y^?1 with a mean value 702.5 µSv y^?1. The effect of boiling of water showed a drastic reduction in the ²²²Rn concentration. The results of the present investigation are systematically analysed, compared with the literature values and discussed.     

5-GHz 32-bit integer execution core in 130-nm dual-V/sub T/ CMOS

A 32-bit integer execution core containing a Han-Carlson arithmetic-logic unit (ALU), an 8-entry /spl times/ 2 ALU instruction scheduler loop and a 32-entry /spl times/ 32-bit register file is described. In a 130 nm six-metal, dual-V/sub T/ CMOS technology, the 2.3 mm/sup 2/ prototype contains 160 K transistors. Measurements demonstrate capability for 5-GHz single-cycle integer execution at 25/spl deg/C. The single-ended, leakage-tolerant dynamic scheme used in the ALU and scheduler enables up to 9-wide ORs with 23% critical path speed improvement and 40% active leakage power reduction when compared to a conventional Kogge-Stone implementation. On-chip body-bias circuits provide additional performance improvement or leakage tolerance. Stack node preconditioning improves ALU performance by 10%. At 5 GHz, ALU power is 95 mW at 0.95 V and the register file consumes 172 mW at 1.37 V. The ALU performance is scalable to 6.5 GHz at 1.1 V and to 10 GHz at 1.7 V, 25/spl deg/C.     

Synthesis and characterization of new aromatic polyesters containing pendent naphthyl units

Two bisphenols, viz., 4,4′‐[1‐(2‐naphthalenyl)ethylidene]bisphenol and 4,4′‐[1‐(2‐naphthalenyl) ethylidene]bis‐3‐methylphenol were prepared by condensation of commercially available 2‐acetonaphthanone with phenol and o‐cresol, respectively. A series of new aromatic polyesters containing pendent naphthyl units was synthesized by phase‐transfer‐catalyzed interfacial polycondensation of these bisphenols with isophthaloyl chloride, terephthaloyl chloride, and a mixture of isophthaloyl chloride/terephthaloyl chloride (50 : 50 mol %). Inherent viscosities of polyesters were in the range 0.83–1.76 dL g⁻¹, while number average molecular weights (M_n) were in the range 61,000–235,000 g mol⁻¹. Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, m‐cresol, pyridine, N,N‐dimethylformamide, N,N‐dimethylacetamide, and 1‐methyl‐2‐pyrrolidinone at room temperature. Tough, transparent, and flexible films were cast from a solution of polyesters in chloroform. X‐Ray diffraction measurements displayed a broad halo at 2θ ≅ 19° indicating the amorphous nature of polyesters. Glass transition temperatures of polyesters were in the range 209–259°C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of polyesters was in the range 435–500°C indicating their good thermal stability. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Barley for Brewing: Characteristic Changes during Malting,Brewing and Applications of its By‐Products

ABSTRACT: Barley is the basic raw material for brewing. Its chemical composition, brewing, and technological indices are highly determinative for the beer quality and the economical efficiency of the brewing process. Barley is rich in protein, carbohydrates, dietary fibers, minerals, and vitamins. The presence of nonstarch polysaccharides as mixed linkage (1‐3),(1‐4)‐β‐d ‐glucans and arabinoxylans together with the enzymes are responsible for barley modification. Malting is a complex process that involves many enzymes; important ones are α‐amylase, β‐amylase, α‐glucosidase, and limit dextrinase. During the process of malting and brewing, the by‐products left after separation of the wort are rich in protein, fibers, arabinoxylans, and β‐glucan. This review summarizes and integrates barley grain with respect to nutritional, functional, and compositional changes that take place during malting and brewing. It also explores in‐depth the several by‐products obtained after brewing and their potential for various food applications. Barley brewing by‐products offer an opportunity for cereal‐based baked and extruded products with acceptable sensory and nutritional characteristics.     

Situating natural language understanding within experience-based design

Building useful systems with an ability to understand "real" natural language input has long been an elusive goal for Artificial Intelligence. Well-known problems such as ambiguity, indirectness, and incompleteness of natural language inputs have thwarted efforts to build natural language interfaces to intelligent systems. In this article, we report on our work on a model of understanding natural language design specifications of physical devices such as simple electrical circuits. Our system, called KA, solves the classical problems of ambiguity, incompleteness and indirectness by exploiting the knowledge and problem-solving processes in the situation of designing simple physical devices. In addition, KA acquires its knowledge structures (apart from a basic ontology of devices) from the results of its problem-solving processes. Thus, KA can be bootstrapped to understand design specifications and user feedback about new devices using the knowledge structures it acquired from similar devices designed previously.In this paper, we report on three investigations in the KA project. Our first investigation demonstrates that KA can resolve ambiguities in design specifications as well as infer unarticulated requirements using the ontology, the knowledge structures, and the problem-solving processes provided by its design situation. The second investigation shows that KA's problem-solving capabilities help ascertain the relevance of indirect design specifications, and identify unspecified relations between detailed requirements. The third investigation demonstrates the extensibility of KA's theory of natural language understanding by showing that KA can interpret user feedback as well as design requirements. Our results demonstrate that situating language understanding in problem solving, such as device design in KA, provides effective solutions to unresolved problems in natural language processing.     

Hybrid inversion of elastic moduli of composite plates from ultrasonic transmission spectra using PVDF plane wave sensor

Determination of the elastic moduli of polymer matrix based structural composite materials is necessary to characterize their strength after fabrication and while in service. This paper reports a modification to goniometry based ultrasonic through transmission data collection by using wide aperture low cost polyvinylidene fluoride (PVDF) based receiver. The use of PVDF based receiver more than satisfies the plane-wave conditions required from measurement. The use of a hybrid inversion technique which combines genetic algorithm based evolutionary approach, critical angle information and the use of stiffness invariants is implemented for determination of stiffness values from experimental transmission spectra measurements. Results for unidirectional and a multi-layered composite laminate are presented.