Nitrophenoxy groups containing polybenzimidazoles as polymer electrolytes for fuel cells: Synthesis and characterization

Polybenzimidazoles containing different contents of pendant nitrophenoxy groups were prepared by condensation of 3,3′‐diamino‐benzidine with a mixture of 3,5‐dicarboxyl‐4′‐nitro diphenyl ether and isophthalic acid (IPA) in different ratios in polyphosphoric acid. The polymers are soluble in polar aprotic solvents, they have inherent viscosities in the range of 0.75–1.10 dL g^?1 and they form tough and transparent films on solution casting. They have good thermal stability with initial decomposition temperature ranging from 380 to 416°C in nitrogen, good tensile strength ranging from 56 to 65 MPa and reasonably good oxidative stability. Phosphoric acid uptake of these polymers is low compared with PBI and membranes doped with phosphoric acid exhibit good proton conductivity in the range of 6.6× 10^?3 to 1.9× 10^?2 S/cm at 25°C and 1.2× 10^?2 to 4.9× 10^?2 S/cm at 175°C, compared with 3.9× 10^?3 S/cm at 25°C and 3.2× 10^?2 S/cm at 175°C for PBI. These membranes are suitable for applications as polymer electrolyte for fuel cell and presumably for gas separation at high temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of new aromatic polyesters containing pendent naphthyl units

Two bisphenols, viz., 4,4′‐[1‐(2‐naphthalenyl)ethylidene]bisphenol and 4,4′‐[1‐(2‐naphthalenyl) ethylidene]bis‐3‐methylphenol were prepared by condensation of commercially available 2‐acetonaphthanone with phenol and o‐cresol, respectively. A series of new aromatic polyesters containing pendent naphthyl units was synthesized by phase‐transfer‐catalyzed interfacial polycondensation of these bisphenols with isophthaloyl chloride, terephthaloyl chloride, and a mixture of isophthaloyl chloride/terephthaloyl chloride (50 : 50 mol %). Inherent viscosities of polyesters were in the range 0.83–1.76 dL g⁻¹, while number average molecular weights (M_n) were in the range 61,000–235,000 g mol⁻¹. Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, m‐cresol, pyridine, N,N‐dimethylformamide, N,N‐dimethylacetamide, and 1‐methyl‐2‐pyrrolidinone at room temperature. Tough, transparent, and flexible films were cast from a solution of polyesters in chloroform. X‐Ray diffraction measurements displayed a broad halo at 2θ ≅ 19° indicating the amorphous nature of polyesters. Glass transition temperatures of polyesters were in the range 209–259°C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of polyesters was in the range 435–500°C indicating their good thermal stability. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of biodiesel in supercritical alcohols and supercritical carbon dioxide

Biodiesel was synthesized in supercritical fluids by two routes: non-catalytically in supercritical alcohols and by enzyme catalysis in supercritical carbon dioxide. Two oils, sesame oil and mustard oil, and two alcohols, methanol and ethanol, were used for the synthesis. Complete conversion was observed for synthesis in supercritical alcohols whereas only a maximum of 70% conversion was observed for the enzymatic synthesis in supercritical carbon dioxide. For the synthesis in supercritical alcohols, the activation energies and pseudo-first order rate constants were determined. For the reactions in supercritical carbon dioxide, a mechanism based on ping pong bi-bi was proposed and the kinetic parameters were determined.     

Systematic design of wideband ΔΣ modulators for WiFi/WiMAX receivers

Modern multi-standard receivers in deep-submicron technologies pose significant design challenges on the analog baseband. Moving this analog filtering to the digital domain simplifies the design, yielding a process-scalable implementation. However, analog-to-digital converter (ADC) specifications now become more stringent and must be obtained by comprehending the standard and the system. Assuming a receiver NF of 5.96 dB and SNR degradation of 0.36 dB by the ADC, the proposed dual-mode WiFi/WiMAX receiver attains an input sensitivity of −74 dBm (20 MHz channel bandwidth). To accommodate the high dynamic range and the anti-alias rejection needed for the system, a Delta-Sigma (ΔΣ) ADC is proposed. Single-loop and Multi-Stage Noise-Shaping (MASH) architectures that achieve a SNR of 69 dB at a low oversampling ratio (OSR) of 8 for a conversion bandwidth of 40 MHz (108 Mbps, OFDM) are investigated at system level. Based on thermal noise, harmonic distortion, and power tradeoffs, a ΔΣ ADC design that meets the design specifications is presented.     

Preparation,characterization, and biodegradation of PS:PLA and PS:PLA:OMMT nanocomposites using Aspergillus niger

Poly(lactic acid) (PLA) was synthesized using l ‐lactic acid by condensation polymerization. Polystyrene (PS) and surface modified montmorillonite (OMMT) was used for the preparation of PS:PLA composites and PS:PLA:OMMT nanocomposites. The composite materials prepared had varying amount of PLA (10–30%) and OMMT (0.5–5 phr). These composites were subjected to degradation in minimal medium using the fungi Aspergillus niger (A. niger) under controlled conditions. Scanning electron microscopy (SEM) showed the growth of microorganism on the polymer surface and fracture within the polymer matrix as a result of degradation. Fourier transform infra red spectroscopy (FTIR) was further used to determine the mechanism leading to biodegradation. It was found that the biodegradation of both PS:PLA and PS:PLA:OMMT took place mainly via break down and utilization of ester group, as can be seen from disappearance of absorption peak of ester group and simultaneous appearance of a typical IR absorption of microbial mass at 1450 cm⁻¹. The thermal stability of PS:PLA:OMMT nanocomposites was found to increase with increasing concentration of OMMT, as observed from thermo gravimetric analysis (TGA), while mechanical property was found to be decreased after degradation at 30% of PLA and 5 wt% of OMMT content. Change in extracellular protein content, biomass production and % degradation with respect to time (up to 28 days) were studied and correlated to evaluate the effectiveness of A. niger in biodegradation of the composites. POLYM. COMPOS., 35:263–272, 2014. © 2013 Society of Plastics Engineers     

Hybrid inversion of elastic moduli of composite plates from ultrasonic transmission spectra using PVDF plane wave sensor

Determination of the elastic moduli of polymer matrix based structural composite materials is necessary to characterize their strength after fabrication and while in service. This paper reports a modification to goniometry based ultrasonic through transmission data collection by using wide aperture low cost polyvinylidene fluoride (PVDF) based receiver. The use of PVDF based receiver more than satisfies the plane-wave conditions required from measurement. The use of a hybrid inversion technique which combines genetic algorithm based evolutionary approach, critical angle information and the use of stiffness invariants is implemented for determination of stiffness values from experimental transmission spectra measurements. Results for unidirectional and a multi-layered composite laminate are presented.     

Solvothermal synthesis and characterization of acicular α-Fe2O3 nanoparticles

Nanometer-sized α-Fe₂O₃ particles have been prepared by a simple solvothermal method using ferric acetylacetonate as a precursor. The products were characterized by X-ray diffraction (XRD), energy dispersive X-ray microanalysis (EDAX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transition electron microscopy (TEM), infrared spectroscopy (IR) and thermal analysis (TG-DTA). XRD indicates that the product is single-phase α-Fe₂O₃ with rhombohedral structure. Bundles of acicular shaped nanoparticles are seen in TEM images with an aspect ratio ～ 12; typically 8–12 nm wide and over 150 nm long. The α-Fe₂O₃ nanoparticles posses a high thermal stability, as observed on thermal analysis traces.