Novel low-cost approach for removal of surface contamination before texturization of commercial monocrystalline silicon solar cells

This paper reports a novel approach on the surface treatment of monocrystalline silicon solar cells using an inorganic chemical, sodium hypochlorite (NaOCl) that has some remarkable properties. The treatment of contaminated crystalline silicon wafer with hot NaOCl helps the removal of organic contaminants due to its oxidizing properties. The objective of this paper is to establish the effectiveness of this treatment using hot NaOCl solution before the saw damage removal step of the conventional NaOH texturing approach. A comparative study of surface morphology and FTIR analyses of textured monocrystalline silicon surfaces with and without NaOCl pre-treatment is also reported. The process could result in a significant low cost approach viable for cleaning silicon wafers on a mass production scale.     

The EcpD Tip Adhesin of the Escherichia coli Common Pilus Mediates Binding of Enteropathogenic E. coli to Extracellular Matrix Proteins

The attachment of enteropathogenic Escherichia coli (EPEC) to intestinal epithelial cells is facilitated by several adhesins; however, the individual host-cell receptors for pili-mediated adherence have not been fully characterized. In this study, we evaluated the hypothesis that the E. coli common pilus (ECP) tip adhesin protein EcpD mediates attachment of EPEC to several extracellular matrix (ECM) glycoproteins (fibronectin, laminin, collagens I and IV, and mucin). We found that the ΔecpA mutant, which lacks production of the EcpA filament but retains EcpD on the surface, adhered to these glycoproteins below the wild-type levels, while the ΔecpD mutant, which does not display EcpA or EcpD, bound significantly less to these host glycoproteins. In agreement, a purified recombinant EcpD subunit bound significantly more than EcpA to laminin, fibronectin, collagens I and IV, and mucin in a dose-dependent manner. These are compelling data that strongly suggest that ECP-producing EPEC may bind to host ECM glycoproteins and mucins through the tip adhesin protein EcpD. This study highlights the versatility of EPEC to bind to different host proteins and suggests that the interaction of ECP with the host’s ECM glycoproteins may facilitate colonization of the intestinal mucosal epithelium.     

Peroxisome Proliferator-Activated Receptor-α (PPARα) Expression in a Clinical Population of Pakistani Patients with Type 2 Diabetes and Dyslipidemia

Poor glycemic control and dyslipidemia are hallmarks of type 2 diabetes mellitus (T2DM), which predispose to cardiovascular diseases. Peroxisome proliferator-activated receptor-α (PPARα) has been associated with atherosclerosis, but its role in T2DM is less clear. Previously, we studied PPARα expression levels in diabetics with and without dyslipidemia (DD). In this study we described the association with fasting blood glucose, HbA1c levels and lipid levels of the study population. Patient demography and biochemical data were collected from hospitals in Islamabad, Pakistan, and RT-PCR data of PPARα expression were retrieved from our previous study from the same cohort. We performed t-tests and regression analysis to evaluate the relationships between PPARα expression and demographic and clinical variables. As expected, body mass index and HbA1c were elevated in T2DM and DD patients compared to controls. Blood lipids (total cholesterol, triglycerides, LDL and HDL) were significantly higher in the DD group compared to the other two groups. In the T2DM and DD groups, the PPARα expression was not associated with any of the physical and biochemical parameters measured in this study. Expression of the PPARα gene was independent of blood lipids and glycemic control in this study. Further research is necessary to better understand the biological parameters of PPARα expression.     

Investigation on Sodium Benzoate Release from Poly(Butylene Adipate‐Co‐Terephthalate)/Organoclay/Sodium Benzoate Based Nanocomposite Film and Their Antimicrobial Activity

Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate‐co‐terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium‐modified montmorillonite [CMMT]) in PBAT matrix was observed by X‐ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria.     

Tannase production by Bacillus licheniformis KBR6: Optimization of submerged culture conditions by Taguchi DOE methodology

Tannase production by Bacillus licheniformis KBR6 under submerged fermentation was optimized following Taguchi orthogonal array (OA) design of experiment (DOE). An OA layout of L18 (2¹ × 3⁵) was constructed with six most influensive factors on tannase biosynthesis like, carbon source (tannic acid), phosphate source (KH₂PO₄), nitrogen source (NH₄Cl), metal ion (Mg²⁺), incubation temperature and initial medium pH at three levels for the proposed experimental design. Tannase yield obtained from the 18 batches fermentation with the selected levels of each factors were processed with Qualitek-4 software at bigger is better as quality character and obtained a specific combination of factors with a predicted tannase production of 0.362 U/ml. The optimal combinations of factors (tannic acid, 1.0 g%; KH₂PO₄, 0.45 g%; NH₄Cl, 0.35 g%; MgSO₄, 0.05 g%) obtained from the proposed DOE methodology was further validated by fermentation experiment and the obtained result revealed an enhanced tannase yield of 2.18-fold (from 0.163 U/ml to 0.356 U/ml) from its unoptimized condition. Taguchi approach of DOE resulted in evaluating the main and interaction effects of the factors individually and in combination.     

MESFET MMIC Ka-band transmitter performance forhigh-volume system applications

An MMIC transmitter for high-volume smart munition applications in Ka band is developed using 0.25 μm MESFET technology. The transmitter, consisting of a voltage-controlled oscillator (VCO) and power amplifier (PA), delivers more than 100 mW of power with an overall efficiency of 10% and a linear tuning range of more than 700 MHz around 35 GHz     

LDV MEASUREMENTS IN GAS-SOLID FLOWS—A REVIEW

This paper describes the history of LDV measurements employed in research involving gas-solid flows. Much of the discussion deals with measurement techniques employed to obtain separate and simultaneous solid and gas phase velocities. Also, LDV based measurement techniques that are used to obtain particle size and concentration information in conjunction with the velocity measurements are presented.     

Effect of chemical composition and initial heat treatment on the structure and properties of a few dual-phase steels

Dual-phase structures are produced in the three experimental steels, namely A1, A2 and A3, a) by air-cooling from the austenitising temperature (910°C) and then intercritically annealing the ferrite-pearlite structure at 750°C and 810°C followed by water quenching, and b) by water-quenching from the same austenitising temperature and then intercritically annealing the martensitic structure again at 750°C and 810°C followed by water quenching. The ferrite phases present in the alloys A1 and A2 have formed in two different ways: i) before and/or during intercritical annealing (old ferrite) and ii) during cooling of the alloys from the intercritical annealing temperature (new ferrite). The amount of new ferrite has been found to be larger in alloy A1 as compared to alloy A2. Alloy A3 did not show any measurable amount of new ferrite. TEM studies did not reveal any significant difference in microstructure in any of the alloys as a result of the initial heat treatment. The volume percent of martensite is maximum in alloy A2 and minimum in alloy A1, with alloy A3 coming in between. Although the amount of martensite in alloy A1 is somewhat lower than that in alloy A3, the overall strength of alloy A1 is higher than that of alloy A3 due possibly to the significant solid solution hardening of the ferritic matrix caused by silicon. Alloy A2 has been found to have the highest strength amongst the three alloys.