An electrochemical technique to deposit thin films of PbTe

PbTe thin films were deposited electrochemically on transparent conducting oxide coated (TCO) glass substrates from a solution of lead acetate and TeO₂ at low pH. A lead (Pb) strip was used as a sacrificing anode and the TCO glass acted as the cathode, which were short-circuited externally. Depositions were carried out at different temperatures of the bath to study the growth kinetics and grain growth. X-ray diffraction technique, scanning electron microscopy, infrared spectroscopy and resistivity measurements were carried out to characterize the deposited films. The films were polycrystalline in nature with a cubic phase.     

Axial ratio bandwidth improvement of compact planar monopole antenna with dual-band and dual-sense

A small size, dual-band and dual-sense monopole antenna is proposed to improve the axial ratio bandwidth (ARBW). The proposed antenna is considered on a low-cost lossy FR4 substrate with parasitic strips (PSs) and partial ground plane of half guided wavelength dimensions. The dimension of the antenna in terms of wavelength is $\mathbf{0.27}{\mathit{\lambda }}_{\mathbf{0}}\mathit{\times }\mathbf{0.29}{\mathit{\lambda }}_{\mathbf{0}}\mathit{\times }\mathbf{0.02}{\mathit{\lambda }}_{\mathbf{0}}$, where ${\mathit{\lambda }}_{\mathbf{0}}$ is the wavelength at the lowest resonant frequency. The circularly polarized (CP) mode is created for strong orthogonal electric fields ${\mathit{E}}_{\mathit{X}}$ and ${\mathit{E}}_{\mathit{Y}}$. The obtained phase difference (PD) between two electric fields ${\mathit{E}}_{\mathit{X}}$ and ${\mathit{E}}_{\mathit{Y}}$ is varied from ${\mathbf{86}}^{°}$ to ${\mathbf{96}}^{°}$ under ARBW. The achieved ARBW is 3.68–3.8 GHz, 4.84–12.58 GHz, and impedance bandwidth (IBW) is 3.51–3.82 GHz and 4.28–15 GHz. The applications of the proposed antenna are International Telecommunication Union (ITU) for 5G, C-band IEEE 802.11a wireless local area network (WLAN) at 5 GHz (5.15–5.825 GHz) and X-band wireless systems.     

Current trends in nano‐technological interventions on plant growth and development: a review

Nanomaterials, recently have found burgeoning attention in the field of agriculture, owing to the positive correlation between nanoparticle (NP) application and the enhanced nutritional status of the applied plants. A wide range of NPs, namely carbon‐based NPs, titanium dioxide NPs, silica NPs etc. has been found to influence plants in a positive way by increasing their nutrient uptake ratio, nutrient usage efficiency, among others. All these attributes have paved the way for possible improvement in plant growth, development, vigour etc. through the use of these NPs, mainly as nanofertiliser. In view of all these, it can also be concluded that in the global scenario of increased demand of food production and supply in the coming years, nanotechnology promises to play a critical role. In this review, an attempt has been made to consolidate all the positive trends with respect to application of NPs on plants, along with their probable mechanism of action, which may provide a comprehensive insight for researchers working in this field.Inspec keywords: reviews, nanoparticles, agriculture, nanotechnology, titanium compounds, crops, nanofabrication, fertilisers, food products, nanobiotechnologyOther keywords: nanotechnological interventions, plant growth, positive correlation, nanoparticle application, enhanced nutritional status, applied plants, carbon‐based NPs, titanium dioxide NPs, silica NPs, influence plants, nutrient uptake ratio, nutrient usage efficiency, positive trends     

Balance testing and balance-testable design of logic circuits

We propose a low-cost method for testing logic circuits, termed balance testing, which is particularly suited to built-in self testing. Conceptually related to ones counting and syndrome testing, it detects faults by checking the difference between the number of ones and the number of zeros in the test response sequence. A key advantage of balance testing is that the testability of various fault types can be easily analyzed. We present a novel analysis technique which leads to necessary and sufficient conditions for the balance testability of the standard single stuck-line (SSL) faults. This analysis can be easily extended to multiple stuck-line and bridging faults. Balance testing also forms the basis for design for balance testability (DFBT), a systematic DFT technique that achieves full coverage of SSL faults. It places the unit under test in a low-cost framework circuit that guarantees complete balance testability. Unlike most existing DFT techniques, DFBT requires only one additional control input and no redesign of the underlying circuit is necessary. We present experimental results on applying balance testing to the ISCAS 85 benchmark circuits, which show that very high fault coverage is obtained for large circuits even with reduced deterministic test sets. This coverage can always be made 100% either by adding tests or applying DFBT.This research was supported by the National Science Foundation under Grant No. MIP-9200526. Parts of this paper were published in preliminary form in Proc. 23rd Symp. Fault-Tolerant Computing, Toulouse, June 1993, and in Proc. 31st Design Automation Conf, San Diego, June 1994.     

A Branching Time Temporal Framework for Quantitative Reasoning

Temporal logics such as Computation Tree Logic (CTL) and Linear Temporal Logic (LTL) have become popular for specifying temporal properties over a wide variety of planning and verification problems. In this paper we work towards building a generalized framework for automated reasoning based on temporal logics. We present a powerful extension of CTL with first-order quantification over the set of reachable states for reasoning about extremal properties of weighted labeled transition systems in general. The proposed logic, which we call Weighted Quantified Computation Tree Logic (WQCTL), captures the essential elements common to the domain of planning and verification problems and can thereby be used as an effective specification language in both domains. We show that in spite of the rich, expressive power of the logic, we are able to evaluate WQCTL formulas in time polynomial in the size of the state space times the length of the formula. Wepresent experimental results on the WQCTL verifier.     

Analysis of Test Application Time for Test Data Compression Methods Based on Compression Codes

We present an analysis of test application time for test data compression techniques that are used for reducing test data volume and testing time in system-on-a-chip (SOC) designs. These techniques are based on data compression codes and on-chip decompression. The compression/decompression scheme decreases test data volume and the amount of data that has to be transported from the tester to the SOC. We show via analysis as well as through experiments that the proposed scheme reduces testing time and allows the use of a slower tester. Results on test application time for the ISCAS'89 circuits are obtained using an ATE testbench developed in VHDL to emulate ATE functionality.     

Graphene/MnO2 hybrid nanosheets as high performance electrode materials for supercapacitors

Graphene/MnO₂ hybrid nanosheets were prepared by incorporating graphene and MnO₂ nanosheets in ethylene glycol. Scanning electron microscopy and transmission electron microscopy analyses confirmed nanosheet morphology of the hybrid materials. Graphene/MnO₂ hybrid nanosheets with different ratios were investigated as electrode materials for supercapacitors by cyclic voltammetry (CV) and galvanostatic charge–discharge in 1 M Na₂SO₄ electrolyte. We found that the graphene/MnO₂ hybrid nanosheets with a weight ratio of 1:4 (graphene:MnO₂) delivered the highest specific capacitance of 320 F g⁻¹. Graphene/MnO₂ hybrid nanosheets also exhibited good capacitance retention on 2000 cycles.     

25th Anniversary Article: Interfacing Nanoparticles and Biology: New Strategies for Biomedicine

The exterior surface of nanoparticles (NPs) dictates the behavior of these systems with the outside world. Understanding the interactions of the NP surface functionality with biosystems enables the design and fabrication of effective platforms for therapeutics, diagnostics, and imaging agents. In this review, we highlight the role of chemistry in the engineering of nanomaterials, focusing on the fundamental role played by surface chemistry in controlling the interaction of NPs with proteins and cells.     

Biosorptive removal of cationic dye from aqueous system: a response surface methodological approach

In this study, response surface methodology (RSM) was employed for the removal of methylene blue (MB) from aqueous solution using neem (Azadirachta indica) bark dust (NBD) as a bioadsorbent. The influence of various process parameters namely initial concentration (500–1,000 mg L^?1), bioadsorbent dose [0.20–1.50 g (100 mL)^?1], pH (5–12), and stirring rate (250–650 rpm) was taken as an input parameter. A total of 29 biosorption experimental runs were carried out employing the detailed conditions designed by RSM based on the Box–Behnken design (BBD). Response surface plots were studied to determine the interaction effects of main factors and optimum conditions of process. Regression analysis showed good fit of the experimental data to the second-order polynomial model with coefficient of determination (R ²) value of 0.9760 and model F value of 40.68. The predicted R ² value is 0.8979. In addition, results reported in this research demonstrated the feasibility of employing NBD as bioadsorbent for MB removal.