Spectra of persistent photoconductivity in InAs/AlSb quantum-well heterostructures

Persistent photoconductivity at T = 4.2 K in AlSb/InAs/AlSb heterostructures with two-dimensional (2D) electron gas in InAs quantum wells is studied. Under illumination by IR radiation (?ω = 0.6–1.2 eV), positive persistent photoconductivity related to the photoionization of deep-level donors is observed. At shorter wavelengths, negative persistent photoconductivity is observed that originates from band-to-band generation of electron-hole pairs with subsequent separation of electrons and holes by the built-in electric field, capture of electrons by ionized donors, and recombination of holes with 2D electrons in InAs. It is found that a sharp drop in the negative photoconductivity takes place at ?ω > 3.1 eV, which can be attributed to the appearance of a new channel for photoionization of deep-level donors in AlSb via electron transitions to the next energy band above the conduction band.     

Effects of breed and sire on carcass characteristics and fatty acid profiles of crossbred wagyu and angus steers

In a two-year experiment, 54 steers sired by seven Wagyu bulls [American Wagyu Association (AWA) sire numbers 331, 384, 388, 411, 429, 433 and 488] and 15 steers sired by two Angus bulls, all out of Angus-Hereford cows, were used to evaluate the effects of sire and breed on carcass characteristics and fatty acid composition. Steers were given ad-libitum access to a high-concentrate diet (15 % alfalfa cubes and 85 % barley supplement) for at least 170 days. Breed and individual sire effects were analysed. Wagyu-sired steers had higher marbling, maturity and quality scores, more estimated kidney, pelvic and heart fat, larger longissimus dorsi muscle areas, lower fat thicknesses and yield grades than Angus-sired steers (p < 0.05). Steers sired by 388, 411 and 433 had lower fat thicknesses than steers sired by Angus, 429 and 488 (p < 0.05). Steers sired by 384 and 388 had higher marbling scores per cm subcutaneous fat than steers sired by Angus, 429 and 488, and lower fat thickness per 100 kg of carcass weight than Angus-sired steers (p < 0.05). For both subcutaneous fat and longissimus dorsi muscle, Wagyu-sired steers had higher (p < 0.05) percentages of 14:0, 14:1, 16:0, 16:1, and lower percentages of 18:0 than Angus-sired steers. The genetic differences in carcass characteristics among Wagyu sires may enable us to select for improved marbling with less fat in the Wagyu breed. Some statistically significant (p < 0.05) but small differences existed in fatty acid profiles between breeds and among sires.     

News: EPA report targets 10 key research areas

Science.     

An Iterative Model for the Steady-State Current Distribution in Oxide-Confined VCSELs

This paper presents an iterative model for the analysis of the current distribution in vertical-cavity surface-emitting lasers (VCSELs) using a SPICE-like approach. The model includes a degeneracy correction for operation at and above threshold. The effect of the resistance due to the p-distributed Bragg reflector (p-DBR) mirror layers and the oxide layer on performance is investigated. Higher sheet resistance under the oxide layer reduces the threshold current, but reduces the current range over which single transverse mode operation occurs. The voltage drop across the p-DBR region dominates spatial hole burning, which is moderated by lateral drift and diffusion. This simple iterative model is applied to commercially available oxide-confined VCSELs.     

The effect of spherical projectile speed in ricochet off water and sand

Experimental results are reported for the ricochet of steel and duralumin spheres ( and 1 in. dia.), from shallow depths of water and dry sand. The critical angle for ricochet off water is shown to increase with speed to approach the theoretical limit of . For ricochet off sand the critical angle decreases with speed but a cut-off angle exists, , for which no ricochet occurs at any speed.     

Plastic yielding of I-beams under shear, and shear and axial loading

Plane strain and plane stress slip-line field solutions previously published by the authors for cantilevers of rectangular cross-section are utilized to estimate the plastic collapse loads of corresponding I-sectioned beams. Uniform I-beams, tapered and haunched beams, and beams with rectangular holes and castellated beams are studied. Previous works in each case are reviewed and for uniform-section cantilevers with end shear loading, the results are compared with the theoretical results of others and with the experimental results of Green and Hundy.     

Electron beam lithography in nanoscale fabrication: recent development

Miniaturization is the central theme in modern fabrication technology. Many of the components used in modern products are getting smaller and smaller. In this paper, the recent development of the electron beam lithography technique is reviewed with an emphasis on fabricating devices at the nanometer scale. Because of its very short wavelength and reasonable energy density characteristics, e-beam lithography has the ability to fabricate patterns having nanometer feature sizes. As a result, many nanoscale devices have been successfully fabricated by this technique. Following an introduction of this technique, recent developments in processing, tooling, resist, and pattern controlling are separately examined and discussed. Examples of nanodevices made by several different e-beam lithographic schemes are given, to illustrate the versatility and advancement of the e-beam lithography technique. Finally, future trends in this technique are discussed.     

Low-energy electron-enhanced etching of HgCdTe

Low-energy electron-enhanced etching (LE4) is applied to HgCdTe to eliminate ion-induced surface damage. First, LE4 results for patterned samples are illustrated. The LE4 mechanism is understood from a mechanistic study in terms of three etch variables: direct current (DC) bias, gas composition, and sample temperature. For this paper, the effects of DC bias (electron energy) and gas composition (CH₄ concentration) are summarized qualitatively, followed by quantitative evidence. Etch rate, the amount of polymer, surface stoichiometry, and surface roughness have specific relations with each etch variable under competition between pure LE4 and polymer deposition.