Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

Algorithm for computation of molecular weight distribution and its moments in reversible step-growth polymerization in batch reactors

The differential equations governing the molecular weight distribution (MWD) in step-growth polymerization are coupled and nonlinear and a large number of them must be solved simultaneously to keep the truncation error low. In this work, these equations have been decoupled so that they can be solved sequentially. The solution of these is independent of the truncation error and there is considerable saving of computation time. To demonstrate the efficiency of the algorithm, the formation of polyethylene terephthalate (PET) in batch reactors with ethylene glycol evaporating has been analyzed. The feed to the reactor is taken as polymer with its oligomers present according to the Flory's distribution. The effect of pressure and temperature of the reactor on the progress of polymerization has been modelled and evaluated. The amount of ethylene glycol distilled, the concentrations of the first five oligomers Q₁ to Q₅, the number average chain length, and the polydispersity index of the polymer have been determined. It is shown that the reduced pressure and increased temperature reduce the concentration of the condensation product in the reaction mass, thus pushing the polymerization in the forward direction. Lastly the CPU time on Dec 1090 using this algorithm is only 0.40 s compared to about 10 min for similar computations using other existing methods.     

An efficient new method for the detection of QRS in electrocardiogram

A simple and efficient new method for QRS detection in Electrocardiogram (ECG) is proposed in this paper. Initially data is preprocessed using two stage median filter for removing baseline drift. The second stage enhances the peaks of ECG wave components by using sixth power of signal. The next stage identifies the QRS complex by taking a variable window size. The detection sensitivity (Se) and positive predictivity (+P) of CSE (Common Standards for Quantitative Electrocardiography) measurement database, MIT/BIH (Massachusetts Institute of Technology/Beth Israel Hospital) Arrhythmia database, European ST-T database and QT database are Se 99.51 & +P 99.69%, Se 99.21 & +P 99.34%, Se 99.53 & +P 99.72% and Se 99.87 & +P 99.95% respectively. These four standard databases used to perform QRS detection considered 368 cases, tested 1,006,168 beats and achieved overall average sensitivity 99.52% and positive predictivity 99.69%. The MIT/BIH Noise Stress Test Database also tested by proposed method.     

Tool path generation framework for accurate manufacture of complex 3D sheet metal parts using single point incremental forming

The prototyping of complex sheet metal parts using single point incremental forming (SPIF) requires the generation of optimal tool paths and/or tool path sequences that ensure that the formed part is within geometric design specifications. The presence of a multitude of features on complex parts leads to multiple inaccuracy inducing phenomena occurring simultaneously due to interactions between the features. This paper proposes a network analysis methodology using topological conceptual graphs to capture the effects of different phenomena on the final accuracy of a sheet metal part manufactured by SPIF. Using this framework optimized tool paths can be generated that compensate for the inaccuracy inducing behavior. Tool path generation algorithms to create partial tool paths that account for the accuracy of specific features in the part based on the proposed framework are also presented. Finally, the creation of integrated tool paths maintaining complementarity between tool paths and desired continuity behavior using non-uniform cubic B-splines is illustrated. A number of case studies demonstrating the applicability of the integrated framework are discussed, where the maximum deviations in the part are significantly reduced and the average absolute deviations for the complete part are brought down to less than 0.5 mm.     

Adaptive tracking control of an autonomous underwater vehicle

This paper presents the trajectory tracking control of an autonomous underwater vehicle(AUV). To cope with parametric uncertainties owing to the hydrodynamic effect, an adaptive control law is developed for the AUV to track the desired trajectory. This desired state-dependent regressor matrix-based controller provides consistent results under hydrodynamic parametric uncertainties.Stability of the developed controller is verified using the Lyapunov s direct method. Numerical simulations are carried out to study the efficacy of the proposed adaptive controller.     

A microfluidic device for thermal particle detection

We demonstrate the use of heat to count microscopic particles. A thermal particle detector (TPD) was fabricated by combining a 500-nm-thick silicon nitride membrane containing a thin-film resistive temperature detector with a silicone elastomer microchannel. Particles with diameters of 90 and 200 μm created relative temperature changes of 0.11 and ?0.44 K, respectively, as they flowed by the sensor. A first-order lumped thermal model was developed to predict the temperature changes. Multiple particles were counted in series to demonstrate the utility of the TPD as a particle counter.     

Effect of graft chain length of the stabilizer on dispersion polymerization of methyl methacrylate in petrol

To carry out dispersion polymerization of methyl methacrylate (MMA) in petrol, we have used a poly(MMA) grafted-poly(12-hydroxystearic acid) copolymer as the stabilizer. This special copolymer was prepared as a solution in a mixture of ethyl acetate and butyl acetate solvents. We investigated the effect of graft chain length of the stabilizer on the dispersion polymerization in petrol. We synthesized the stabilizer copolymer with n = 1–4 and determined the rate and the molecular weight of the PMMA formed. There is no dispersion polymerization for n = 1. However, for any other n, for a given stabilizer concentration, as the chain length of the graft is increased, the molecular weight as well as the rate of PMMA formation increases. As opposed to this for a given graft length as the concentration of the stabilizer increases, the molecular weight of PMMA first rises, but for a larger concentration, it begins to fall after undergoing a maximum. In this work, we modeled the heterogeneity of the reaction mass and proposed a mathematical model for dispersion polymerization of MMA in petrol. The computer results are found to conform to the experimentally observed molecular weight of the PMMA. © 1993 John Wiley & Sons, Inc.     

Conductivity and viscosity studies of ethylene carbonate based solutions containing lithium perchlorate

Specific conductivities and viscosities of lithium perchlorate at four different concentrations (0.5, 1.0, 1.5 and 2.0 M) in ethylene carbonate (EC) based binary mixed solvent systems at 25°C are reported. The co-solvents chosen were tetrahydrofuran (THF), 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL). Viscosity variations in all the three mixed solvent systems without electrolyte showed negative deviation from ideal behaviour thereby indicating the occurrence of a structure breaking effect in these three different binary systems. The increase in viscosity with increase in concentration of LiClO₄ is attributed to the structural enhancement through the formation of a solvated complex which occupies interstitials in the solvent mixtures. 1 M LiClO₄ solution shows maximum specific conductivity at 30 vol % EC for EC + DME and EC + DOL mixtures and at 50 vol % EC for EC + THF mixtures. Conductivity variations are explained on the basis of preferential solvation of lithium perchlorate by co-solvents (THF, DME and DOL) in their respective mixtures with ethylene carbonate.