Optimization of A-TIG process parameters using response surface methodology

In the present work, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design (CCD). 9–12% Cr ferritic stainless steel (FSS) plates were welded using A-TIG welding. It was observed that all input variables have a direct influence on the DOP, BW, and D/W. However, flux coating density has no significant effect on WA. Mathematical models were generated from the obtained responses to predict the weld bead geometry. An optimized DOP, BW, D/W, and WA of 6.95?mm, 8.76?mm, 0.80, and 41.99?mm², respectively, were predicted at the welding current of 213.78 A, the welding speed of 96.22?mm/min, and the flux coating density of 1.99?mg/cm². Conformity test was done to check the practicability of the developed models. The conformity test results were in good agreement with the predicted values. Arc constriction and reversal in Marangoni convection were considered as major mechanisms for the deep and narrow weld bead during A-TIG welding.     

Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions

Developing light weight polymer based composites dispersed with novel reinforcements which can function well in the presence of aggressive environments is an active research field in the materials engineering. Hence, in the current work, halloysite nanotubes (1 %, 2 %, 4 %, 6 %, 8 % and 10 % by weight) were reinforced into acrylonitrile butadiene styrene/polycarbonate blend and the role of reinforcing phases on the mechanical performance under aggressive environmental conditions has been evaluated. Hardness was measured as gradually increased in the composites with the increased content of the reinforcements. Impact strength of the composites was observed as increased in the composites up to 4 % reinforcement and further decreased. Increased strength was measured for the composite up to 2 % reinforcement. Ductility of the composites was decreased as reflected form the decreased % of elongation with the higher fraction of reinforcements due to induced brittleness. The composites were exposed to diluted sulfuric acid for 3 h and 6 h at 60 °C and then subjected to tensile loading. With the increased time of exposure, composites with 1 % and 2 % reinforcement exhibited relatively better performance.     

A hybrid approach to asset allocation with simultaneous consideration of suitability and optimality

In this paper, we develop mathematical models for simultaneous consideration of suitability and optimality in asset allocation. We use a hybrid approach that combines behavior survey, cluster analysis, analytical hierarchy process and fuzzy mathematical programming.     

Does India need to harmonize the law of patent exhaustion and parallel imports?

The amendment of patent law of India in 2005 to fulfill her international obligation under the TRIPS Agreement (World Trade Organization Agreement on Trade Related Intellectual Property Rights) was an outcome of an attempt to balance the competing interests of several stakeholders, including indigenous pharmaceutical companies, multi-national pharmaceutical companies, non-governmental organizations and civil society groups concerned with access to affordable drugs. The adverse consequence of this delicate balancing is introduction of some provisions in the Act whose compatibility with the TRIPS Agreement is questionable, and which therefore are prone to litigations. Section 107A(b) of the amended patent law dealing with parallel imports is one such provision, which, if interpreted word for word could have significant connotations for the rights of a patent owner. This article aims to examine the inconsistencies intrinsic in Section 107A(b) and discusses the divergences in the Indian patent law associated with the doctrine of exhaustion and parallel imports. This article also proposes legal amendments with a view to eliminate inconsistencies intrinsic in the section and enlarge the ambit of the exhaustion principle conceptualized therein, while concurrently remaining compliant with the TRIPS Agreement.     

Solving single-product economic lot-sizing problem with non-increasing setup cost,constant capacity and convex inventory cost in O(N log N) time

This paper considers an economic lot sizing model with constant capacity, non-increasing setup cost, and convex inventory cost function. Algorithms with computational time of O(N×TD_N)have been developed for solving the model, where N is the number of planning periods and TD_N is the total demand. This study partially characterizes the optimal planning structure of the model. A new efficient algorithm with computational time of O(N log N) has also been developed based on the partial optimal structure. Moreover, computational study demonstrates that the new algorithm is efficient.     

Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level

A new kind of molecularly imprinted polymer-modified graphite electrode was fabricated by “grafting-to” approach, incorporating sol–gel technique, for the detection of acute deficiency in serum ascorbic acid level (SAAL), manifesting hypovitaminosis C. The modified electrode exhibited ascorbic acid (AA) oxidation at less positive potential (0.0 V) than the earlier reported methods, resulting in a limit of detection as low as 6.13 ng mL⁻¹ (RSD = 1.2%, S/N = 3). The diffusion coefficient (1.096 × 10⁻⁵ cm² s⁻¹), rate constant (7.308 s⁻¹), and Gibb's free energy change (−12.59 kJ mol⁻¹) due to analyte adsorption, were also calculated to explore the kinetics of AA oxidation. The proposed sensor was found to enhance sensitivity substantially so as to detect ultra trace level of AA in the presence of other biologically important compounds (dopamine, uric acid, etc.), without any cross interference and matrix complications from biological fluids and pharmaceutical samples.     

EEHC: Energy efficient heterogeneous clustered scheme for wireless sensor networks

In recent years, there has been a growing interest in wireless sensor networks. One of the major issues in wireless sensor network is developing an energy-efficient clustering protocol. Hierarchical clustering algorithms are very important in increasing the network’s life time. Each clustering algorithm is composed of two phases, the setup phase and steady state phase. The hot point in these algorithms is the cluster head selection. In this paper, we study the impact of heterogeneity of nodes in terms of their energy in wireless sensor networks that are hierarchically clustered. We assume that a percentage of the population of sensor nodes is equipped with the additional energy resources. We also assume that the sensor nodes are randomly distributed and are not mobile, the coordinates of the sink and the dimensions of the sensor field are known. Homogeneous clustering protocols assume that all the sensor nodes are equipped with the same amount of energy and as a result, they cannot take the advantage of the presence of node heterogeneity. Adapting this approach, we introduce an energy efficient heterogeneous clustered scheme for wireless sensor networks based on weighted election probabilities of each node to become a cluster head according to the residual energy in each node. Finally, the simulation results demonstrate that our proposed heterogeneous clustering approach is more effective in prolonging the network lifetime compared with LEACH.     

Agent-based negotiation and decision making for dynamic supply chain formation

Modern businesses are facing the challenge of effectively coordinating their supply chains from upstream to downstream services. It is a complex problem to search, schedule, and coordinate a set of services from a large number of service resources under various constraints and uncertainties. Existing approaches to this problem have relied on complete information regarding service requirements and resources, without adequately addressing the dynamics and uncertainties of the environments. The real-world situations are complicated as a result of ambiguity in the requirements of the services, the uncertainty of solutions from service providers, and the interdependencies among the services to be composed. This paper investigates the complexity of supply chain formation and proposes an agent-mediated coordination approach. Each agent works as a broker for each service type, dedicated to selecting solutions for each service as well as interacting with other agents in refining the decision making to achieve compatibility among the solutions. The coordination among agents concerns decision making at strategic, tactical, and operational level. At the strategic level, agents communicate and negotiate for supply chain formation; at the tactical level, argumentation is used by agents to communicate and understand the preferences and constraints of each other; at the operational level, different strategies are used for selecting the preferences. Based on this approach, a prototype has been implemented with simulated experiments highlighting the effectiveness of the approach.