In vitro ageing and wear behaviour of ceria stabilized zirconia toughened alumina (CSZ-TA) bio-ceramic

15–25 wt% zirconia (stabilized with 14 mol% ceria) toughened alumina was synthesized by co-precipitation technique. The synthesized powders were calcined at different temperatures, compacted and conventionally sintered following two steps sintering process. Uniformly distributed submicron sized grains with Vickers' hardness value up to 1730±6HV20 were achieved after conventional sintering. In order to assess the ageing behaviour, samples were hydrothermally treated (in vitro) at 134 °C under 0.2 MPa in presence of simulated body fluid. Rietveld refinement of the X-ray diffraction patterns was carried out to estimate the phase content after calcination, sintering and after different stages of hydrothermal treatment. No significant phase change (only ∼3%) was observed even after 100 h of hydrothermal treatment. Very few bulged grains (resulted from the tetragonal to monoclinic phase transformation) on the surface and slight decrease in hardness value were observed after hydrothermal treatment. Fretting wear in dry condition was carried out taking ball on flat geometry for 10⁵ cycles at different loads before and after hydrothermal treatment. Wear volumes were directly estimated from the surface scanning of the wear scar using profilometer. Transition of wear and its related mechanisms at different loads along with the effect of ageing on wear were discussed.     

Design and optimization of thermo-electrochemical cells

Thermo-electrochemical cells (or thermocells) convert thermal energy to electricity in continuous operation based on a balance of ion conduction and redox reactions at hot and cold electrodes. In this study, the fundamental governing equations for mass and heat transfer, fluid dynamics, and electrokinetics in thermocells are presented and solved numerically using COMSOL. A parametric study is performed to explore the limitations and optimal cell dimensions for maximum energy conversion efficiency in thermocells. Series-stacking designs are demonstrated to have the potential to increase conversion efficiency by 100 % compared to a single cell configuration. Natural convection is shown to significantly increase the conversion efficiency of thermocells with conventional aqueous electrolyte (0.4 M potassium ferri/ferrocyanide), by compressing the diffusive boundary layers. A flow cell thermocell design is also considered. Results reveal that the ohmic resistance of the electrolyte limits the energy conversion efficiency of this design.     

Efficient fog removal from video

In this paper, a framework of real-time video processing for fog removal using uncalibrated single camera system is proposed. Intelligent use of temporal redundancy present in video frames paves the way for real-time implementation. Any fog removal algorithm for images acquired with uncalibrated single camera system can be extended to video using the proposed framework. For the purpose of real-time implementation, several fog removal algorithms for images are investigated and few top ranking algorithms in speed and quality are chosen. Simulation results confirm that proposed framework reduces the computation per frame significantly. Proposed fog removal framework has a wide application in navigation, transportation, and other industries.     

INDEX: An INDustrial Building Design EXpert

This paper presents an account of a research project concerned with the application of artificial intelligence techniques to structural design in civil engineering. INDEX is a rule-based system for the design of industrial buildings that is being developed at the University of Edinburgh. It has a blackboard architecture and its knowledge base is organized into a hierarchy of two levels. The main focus of this paper is to summarize the implementation aspects of one of its knowledge modules, ALTSEL which is responsible for the preliminary design. The organization of knowledge inside the ALTSEL module is briefly outlined using a number of representative rules from its sub-modules. The use of the Edinburgh PROLOG Blackboard Shell in the development of INDEX is also described briefly.     

Novel 1,3,4-oxadiazole derivatives as efficient sensitizers for dye-sensitized solar cells: A combined experimental and computational study

We have synthesized and characterized donor–π–spacer–acceptor type molecules in which 1,3,4-oxadiazoles are π-spacers, triphenylamines are the donors and cyanoacetic acid are the acceptors for use as sensitizers in dye-sensitized solar cells (DSSCs). Detailed absorption, emission, electrochemical, photoelectrochemical and computational studies have been carried out on five novel derivatives. The dyes have an absorption range of 377–388 nm, and an emission in the range of 494–540 nm. There is a large charge transfer from the donor side to the acceptor side on excitation. The propeller shape of the triphenylamine and the bulky substituents on it help in reducing the dye-aggregation on TiO₂ surface. The dyes exhibited good overall conversion efficiency (2.79–3.21%). Plane wave calculations indicate that the dye has a reasonably strong binding to the TiO₂ surface and the generated DOS picture shows an overlap of the molecular orbitals of the dye and the TiO₂ bands. We conclude that the dyes have a promising role as sensitizers in DSSC.     

Performance analysis of an industrial waste heat‐based trigeneration system

The thermodynamic performance of an industrial waste heat recovery‐based trigeneration system is studied through energy and exergy efficiency parameters. The effects of exhaust gas inlet temperature, process heat pressure, and ambient temperature on both energy and exergy efficiencies, and electrical to thermal energy ratio of the system are investigated. The energy efficiency increases while electrical to thermal energy ratio and exergy efficiency decrease with increasing exhaust gas inlet temperature. On the other hand, with the increase in process heat pressure, energy efficiency decreases but exergy efficiency and electrical to thermal energy ratio increase. The effect of ambient temperature is also observed due to the fact that with an increase in ambient temperature, energy and exergy efficiencies, and electrical to thermal energy ratio decrease slightly. These results clearly show that performance evaluation of trigeneration system based on energy analysis is not adequate and hence more meaningful evaluation must include exergy analysis. The present analysis contributes to further information on the role of exhaust gas inlet temperature, process heat pressure, ambient temperature influence on the performance of waste heat recovery‐based trigeneration from a thermodynamic point of view. Copyright © 2009 John Wiley & Sons, Ltd.     

Sonochemical synthesis of crystalline nanoporous zinc oxide spheres and their application in dye-sensitized solar cells

A composite material made of zinc oxide and polyvinyl alcohol was prepared by a sonochemical method. Annealing of the composite under air removed the polymer, leaving porous spheres of ZnO. This change was accompanied by a change of the surface area from 2 m²/g to 34 m²/g. The porous ZnO particles were used as the electrode material for dye-sensitized solar cells (DSSCs). It was tested by forming a film of the doped porous ZnO on a conductive glass support. The performance of the solar cell is reported.