Effect of drying catalysts on the properties of thermal copolymers from conjugated linseed oil–styrene–divinylbenzene

The effect of addition of a varying concentration of a drying catalyst (cobalt salt as primary drier) and a combination of catalysts such as cobalt, zirconium (secondary drier) and calcium (auxiliary drier) in a fixed concentration (1%) to a 50:20:30 compositions of 87% conjugated linseed oil, styrene (ST), and divinylbenzene (DVB) has been studied by characterizing the resulting polymers from thermal polymerization with various techniques such as soxhlet extraction, ¹H NMR (¹H nuclear magnetic resonance) spectroscopy, dynamic mechanical analysis (DMA), mechanical and thermogravimetric analysis. The thermal polymerization is performed in the temperature range of 85–160 °C. By soxhlet extraction, it is observed that the polymers contain approximately 64–77% crosslinked materials and the crosslinked insoluble fraction increases with an increase in cobalt catalyst concentration. For fixed concentration (1%) of catalysts, the insoluble fraction from the soxhlet extraction is maximum for the cobalt–zirconium mixture and minimum for the cobalt–calcium mixture. The micro-composition of these polymers obtained from the ¹H NMR spectroscopy indicates that the crosslinked materials are composed of both soft oily and hard aromatic phases. The polymers with varying cobalt concentrations up to 0.6 wt% exhibit two separate glass transition temperatures, indicating the presence of two separate phases, one soft rubbery phase with sharp glass transition temperature of −50 °C and a hard brittle plastic phase of broadened glass transition temperature of 70–120 °C. On the other hand, instead of sharp peaks, the polymers with 0.8 and 1.0% cobalt salts exhibit two humps and a distinct peak in between the humps in the tan δ plots, indicating the presence of an additional phase comprised of a copolymer of linseed oil–styrene and DVB. For fixed concentration (1%) of catalysts, the cobalt–calcium combination follows the similar trend in the tan δ as that for the polymers with 0.8–1.0% cobalt whereas other combinations exhibit two phases. These polymers possess crosslink densities of 0.63–0.91 × 10⁴ mol/m³ and compressive strengths of 2.0–26.6 MPa. The catalyzed polymers are thermally stable below 300 °C and exhibit a major thermal degradation with a maximum degradation of 82–88% at a temperature of 500 °C.     

Swelling kinetics of linseed oil‐based polymers

Kinetics of swelling and sorption behavior of copolymers (based on linseed oil, styrene, divinylbenzene, and acrylic acid via cationic and thermal polymerization) is studied in tetrahydrofuran (THF) at different temperatures. The values of n in the transport equation are found to be below 0.4, showing non‐Fickian or pseudo‐Fickian transport in the polymers. The dependence of diffusion coefficient on the composition and temperature has also been studied for the linseed oil‐based polymers. The diffusion coefficient in cationic samples decreases with an increase in the oil contents in the samples. In case of thermal samples, the diffusion coefficient first increases up to 30% oil contents and then decreases. The diffusion coefficient decreases with an increase in temperature for all of the linseed oil polymer samples. The sorption coefficient increases with an increase in the oil contents for all samples. The crosslink density (calculated from the THF swelling) ranges from 20.16 to 92.34 × 10⁶ mol/cm³ for cationic samples and 20.62 to 86.01 × 10⁶ mol/cm³ for thermal samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling kinetics of linseed oil‐based nanocomposites

The solvent‐resistance properties of the montmorillonite‐filled conjugated linseed oil‐based nanocomposites are studied in tetrahydrofuran through equilibrium swelling method at different temperatures. The values of “n” in solvent transport equation are found to be below “0.5,” showing the non‐Fickian diffusion in the polymer. The dependence of the diffusion coefficient on the composition, percentage of clay, and temperature has been studied for nanocomposite samples. The diffusion coefficient increases with an increase in the clay contents and temperature. The crosslink density of the nanocomposites ranges from 101.07 to 237.46 × 10⁶ mol/cm³. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Curing kinetics of medium reactive unsaturated polyester resin used for liquid composite molding process

The cure kinetics of medium reactivity unsaturated polyester resin formulated for Liquid Composite Molding process simulation was studied by Differential Scanning Calorimetry (DSC) under isothermal conditions over a specific range of temperature. For isothermal curing reactions performed at 100, 110, and 120°C, several influencing factors were evaluated using the heat evolution behavior of curing process. We propose two‐ and three‐parameter kinetic models to describe the cure kinetics of thermoset resins. Comparisons of the model solutions with our experimental data showed that the three‐parameter model was the lowest parameter model capable of capturing both the degree of cure and the curing rate qualitatively and quantitatively. The model parameters were evaluated by a non‐linear multiple regression method and the temperature dependence of the kinetic rate constants thus obtained has been determined by fitting to the Arrhenius equation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ascorbic Acid-Assisted Eco-friendly Synthesis of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanoparticles as an Anode Material for High-Performance Lithium-Ion Batteries

We have synthesized NiCo₂O₄ nanoparticles (NCO NPs) using an ascorbic acid-assisted co-precipitation method for the first time. When NCO NPs are used as an anode material for lithium-ion batteries, the cell exhibits superior lithium storage properties, such as high capacity (700 mA h g^?1 after 300 cycles at 200 mA g^?1), excellent rate capabilities (applied current density range 100–1200 mA g^?1), and impressive cycling stability (at 1200 mA g^?1 up to 650 cycles). The enhanced electrochemical properties of NCO NPs are due to the nanometer dimensions which not only offers a smooth charge-transport pathway and short diffusion paths of the lithium ions but also adequate spaces for volume expansion during Li storage. Hence, this eco-friendly synthesis approach will provide a new strategy for the synthesis of various nanostructured metal oxide compounds, for energy conversion and storage systems applications.     

Impact of reform and privatization on consumers: A case study of power sector reform in Orissa,India

Orissa is the first state in India to have undergone reform in the power sector, with the government withdrawing its control. The model of this reform is known as the WB–Orissa model. The goal of this paper is to examine the impact of this reform on consumers of electricity, which has been measured using multiple regression models. The variables represent the parameters that consumers are most interested in, and the regression coefficients represent the weights of the corresponding variables. The data were collected using a survey methodology. The impact of reform was found to be mixed. Some groups of consumers saw benefits, while others felt a negative impact. A focus group study was conducted to identify the variables of interest to consumers of electricity. The model was used to estimate consumer benefit and was validated using primary data and structural equation modeling. The study revealed beneficial aspects of reform and areas with no benefits.     

Outage and BER analysis of cellular CDMA for integrated services with correlated signal and interference

In this letter, we evaluate the outage and "minimum duration outage" probabilities for integrated services in cellular code-division multiple-acess systems considering correlation among signal and interferers. Correlation is found to lower the outage probability. The effect of correlation and power control error on bit error rate is also studied.     

Performance Analysis of a Cognitive Radio Network Under Energy Harvesting from Primary User Emulation Attacker

Wireless Personal Communications - The paper reports the performance of an energy harvesting cognitive radio network under primary user emulation (PUE) attack. A secondary user (SU) can harvest...     

Sympathetic response to stimulation of the pontine A5 region in conscious rabbits

OBJECT: This study is a retrospective analysis of clinical data obtained in 28 patients affected by obstructive hydrocephalus who presented with signs of midbrain dysfunction during episodes of shunt malfunction. METHODS: All patients presented with an upward gaze palsy, sometimes associated with other signs of oculomotor dysfunction. In seven cases the ocular signs remained isolated and resolved rapidly after shunt revision. In 21 cases the ocular signs were variably associated with other clinical manifestations such as pyramidal and extrapyramidal deficits, memory disturbances, mutism, or alterations in consciousness. Resolution of these symptoms after shunt revision was usually slow. In four cases a transient paradoxical aggravation was observed at the time of shunt revision. In 11 cases ventriculocistemostomy allowed resolution of the symptoms and withdrawal of the shunt. Simultaneous supratentorial and infratentorial intracranial pressure recordings performed in seven of the patients showed a pressure gradient between the supratentorial and infratentorial compartments, with a higher supratentorial pressure before shunt revision. Inversion of this pressure gradient was observed after shunt revision and resolution of the gradient was observed in one case after third ventriculostomy. In six recent cases, a focal midbrain hyperintensity was evidenced on T2-weighted magnetic resonance imaging sequences at the time of shunt malfunction. This rapidly resolved after the patient underwent third ventriculostomy. CONCLUSIONS: It is probable that in obstructive hydrocephalus, at the time of shunt malfunction, the development of a transtentorial pressure gradient could initially induce a functional impairment of the upper midbrain, inducing upward gaze palsy. The persistence of the gradient could lead to a global dysfunction of the upper midbrain. Third ventriculostomy contributes to equalization of cerebrospinal fluid pressure across the tentorium by restoring free communication between the infratentorial and supratentorial compartments, resulting in resolution of the patient's clinical symptoms.     

Long-term expression and secretion of human glucocerebrosidase by primary murine and human myoblasts and differentiated myotubes

The majority of studies dealing with DNA analyses are made on fixed cells. In this context, the efficiency as fixatives of ethanol, methanol, acetone, Carnoy, Boehm-Sprenger and aldehydes was determined using two different DNA fluorescent probes, Hoechst 33342 and propidium iodide. The purpose of our study was to find the fixative that would provide the best results with respect to the following parameters: aggregates, cell size and granularity, and DNA staining analysis. Using murine fibroblasts, we found that 68% ethanol, 85% methanol and aldehydes did not increase aggregate formation, whereas Carnoy, acetone or Boehm-Sprenger fixatives did. The results show that aldehydes seem to alter cell size least. All fixatives induce an increase in cell granularity, which is very pronounced with alcohols, but aldehydes alter morphology less than alcohols. We observed that the fixatives giving the best resolution with Hoechst 33342 staining lead to a lower measurement variability than with propidium iodide staining. This study leads us to conclude that 68% ethanol and 85% methanol can be considered as appropriate fixatives for flow cytometry studies of DNA content.