Amperometric screen-printed algal biosensor with flow injection analysis system for detection of environmental toxic compounds

A screen-printed algal biosensor was fabricated for evaluation of toxicity of chemicals. An algal ink was prepared by mixing unicellular microalga Chlorella vulgaris cells, carbon nanotubes and sodium alginate solution. The algal ink was immobilized directly on a screen-printed carbon electrode surface using screen-printing technique. Photosynthetically generated oxygen of the immobilized algae was monitored amperometically. Responses of the algal biosensor to four toxic compounds, 6-chloro-N-ethyl-N-isopropyl-1,3,5-triazine-2,4-diamine (atrazine) and 3-(3,4-dichlorophenyl)-1,1-diethylurea (DCMU) were evaluated as inhibition ratios of the reduction current. The concentrations that gave 50% inhibition of the oxygen reduction current (IC^′50) for atrazine and DCMU were 12 and 1 μmol dm⁻³, respectively. In comparison with the conventional algal biosensors, in which the algal cells were entrapped in an alginate gel and immobilized on the surface of a transparent indium tin oxide electrode, the present sensor is much smaller and less expensive, with the shorter assay time.     

Theoretical calculation of uncertainty region based on the general size distribution in the preparation of standard reference particles for particle size measurement

In order to confirm the reliability of particle size measurement technique and to prepare standard reference particles for calibrating particle size measurement devices, experimental and theoretical studies have been conducted about the uncertainty region of particle size measurement for the general particle size distribution. A new theoretical equation to calculate fundamental uncertainty region in the case that the maximum and minimum particle sizes are known, is derived based on Tschebyscheff theory. The uncertainty regions calculated based on the proposed method are applied to poly-disperse particles and a picket-fence distribution composed of two kinds of nearly mono-disperse particles.For the poly-disperse particles, the uncertainty region increases with the increase in particle diameter. For the picket-fence distribution composed of two kinds of nearly mono-disperse particles, the uncertainty region increases around the intermediate particle diameters between the two kinds of particles.Numerical simulation of uncertainty region for the picket-fence distribution has also been carried out. The uncertainty region decreases with the increase in sample size or the decrease in geometric standard deviation.     

Investigation of false-positive reactions for CBH351 maize in screening PCR analysis

Examination for CBH351 maize was conducted by the qualitative polymerase chain reaction (PCR) method in maize grain and maize processed foods obtained in the Tokyo area. The numbers of samples possibly positive in the screening test were 7 of 22 (31.8%) for maize grain samples, 4 of 14 (28.6%) for semi-processed foods, 11 of 30 (36.7%) for canned products, 3 of 30 (10.0%) for maize snacks, 3 of 4 (75%) for tacos and 1 of 3 (33.3%) for tortillas. However, CBH351 maize was not detected in the confirmation test. Therefore, the results of the screening test were false-positive. Since the reaction might have been caused by the base sequences of the 3'-end of primers CaM03-5' and CBH02-3' used in the screening test, a new primer pair was designed. The PCR products obtained with the new primer pair TMC2-5'--TMS2-3' were specific for CBH351 and were not obtained with barley, wheat, rice, RRS, Bt11, or Event176. Thus, the new primer pair shows high specificity. CBH351 maize was detected from samples containing at least 0.05% CBH 351 maize DNA by using this primer pair.     

Significant increase in recombinant protein production of a virus-infected Sf-9 insect cell culture of low MOI under low dissolved oxygen conditions

Spodoptera frugiperda Sf-9 insect cells were infected with recombinant Autographa californica nuclear polyhedrosis virus at a low multiplicity of infection (MOI) (0.1), and the effect of dissolved oxygen (DO) on the production of a polyhedrin promoter-driven recombinant protein (beta-galactosidase), intrinsic proteases (carboxyl and cysteine proteases), and the virus was determined. The DO concentrations used in the present study were 45%, 25%, 5%, and 1.3% of air saturation. At 5% DO the cell growth following viral infection was greatest and beta-galactosidase was about 5-fold increased in volumetric yield compared to that at 45% and 25% DO, whereas the growth at 1.3% DO was extremely poor. The virus titer in the medium at 4-8 d post-infection (dpi) was also highest at 5% DO, but the titer was significantly decreased by further increasing the culture time. This was in part attributed to the fact that baculovirus is susceptible to oxidative inactivation under aerobic conditions. The DO dependency of the specific oxygen consumption rate of virus-infected and uninfected Sf-9 cells was expressed by a Monod-type equation. A critical DO, above which the rate of oxygen utilization is not limited by DO, was estimated to be 3.5% of air saturation for virus-infected Sf-9 cells. These results indicated that for a baculovirus-infected Sf-9 insect cell culture of low MOI, the optimal DO was likely to be approximately 5% of air saturation, which is above the critical DO for the infected Sf-9 cells but sufficiently low to reduce the possibility of the oxidative inactivation of virus. For the production of carboxyl and cysteine proteases, the accumulation behavior and concentrations did not significantly vary with DO, except that a peak of cysteine protease activity was observed intracellularly only at 5% DO, coinciding with beta-galactosidase production.     

Estimation of the global net primary productivity using NOAA images and meteorological data: changes between 1988 and 1993

A model for net primary productivity (NPP) estimation was developed based on a relationship between NPP estimated by the Chikugo model and the intensity-sum of the normalized difference vegetation index (NDVI) multiplied by the solar radiation during growth periods. There was a clear linear relationship between the estimated NPP and the intensity-sum (R ²=0.845), whose slope indicated the average light use efficiency (LUE) of global plants. The NPP estimation model (NDVI-based model), which included growth multipliers of optimum air temperature and soil water stress on vegetation growth with LUE, was developed. NDVI anomalies caused by scattering of volcanic ash from Mt Pinatubo were reduced by a correction based on intensity matching of channels 1 and 2 individually. NDVI retrieved a seasonal change pattern in 1991 and 1992 after the correction. Global NPP between 1988 and 1993 was estimated using the NDVI-based model, corrected NDVI, air temperature and soil water content data. There was a linear relationship between the estimated NPP and NPP observed in forests in China. The average global NPP during the 6 years was about 123?Pg dry weight per year, and the maximum and minimum NPP appeared in 1991 and 1988, respectively.     

Localized magnetic properties in grain‐oriented electrical steel measured by needle probe method

The accuracy of a needle probe method in measuring localized magnetic properties of grain‐oriented electrical steel sheets was investigated and its application studied. The measuring error for the localized flux density was determined to be less than 1.7% for a load on the needle tip lighter than 300 g when the yoke structure was symmetrical with respect to the sheet plane. The average of localized iron losses measured with the combination of a needle probe and a Hall probe was in linear relation to the overall losses in the sheet. This method revealed that the localized magnetic properties vary markedly from location to location inside the sheet, and that localized iron loss depends on the localized flux density, domain wall spacing, and yaw angle of grain orientation. © 1999 Scripta Technica, Electr Eng Jpn, 126(4): 1–11, 1999     

Continuous fine particle classification by water elutriator with applied electro-potential

In order to classify fine particles in slurry continuously, a horizontal type water elutriator with electrical potential is newly developed. The experimental classification performance was compared with the numerical calculation. Test particles used were pure silica particles with the mass median diameters of 3.5 and 2.5 μm.The effects of inlet flow rate, slurry concentration, applied electro-potential and the shape of inlet on the classification performance were also studied. The classification accuracy increased by applying the electro-potential and the cut size decreased with an increase in the electro-potential. The classification performance with a three-layer inlet was higher than that with a two-layer inlet.The experimental data agreed well with the numerical calculation. It is further shown that the 50% cut size was about 1 μm for a relatively short time, and the newly developed water elutriator is, therefore, effective for the classification of fine particles in slurries.     

Critical current test results of 13 T-46 kA Nb3Al cable-in-conduit conductor

In the framework of ITER-EDA, a 13 T-46 kA Nb₃Al conductor with stainless steel jacket has been developed in order to demonstrate applicability of an Nb₃Al conductor with react-and-wind technique to ITER-TF coils. Using a 3.5 m sample consisting of a pair of conductors with 0% and 0.4% bending strain, the critical current performances of the Nb₃Al conductors were studied to verify that the conductor achieves the expected performance and the bending strain of 0.4% does not originate degradation. The critical currents were measured at background magnetic fields of 7, 9, 10 and 11 T at temperatures from 6 to 9 K. The expected critical currents were evaluated taking into account the variation of the strain in the cross-section due to the bending strain as well as self-field and non-uniform current distribution as results of an imbalance in the joint resistance and inductances. The calculation results indicate that the current distribution is almost uniform and the experimental results showed good agreement with the expected critical currents. Accordingly, we can conclude that the fabrication process of this conductor is appropriate and the react-and-wind technique using the Nb₃Al conductor is applicable to ITER-TF coils. In addition, the critical current of the Nb₃Al conductor is expected to be 108 kA at 13 T and 4.5 K, resulting in a sufficient margin against the nominal current of 46 kA. Furthermore, it was found that the decrease in the critical current by thermal strain can be made small by applying the bending strain to the conductor so as to reduce the compressive strain at higher fields, i.e. inner side of the coil, in the conductor cross-section.     

Factors affecting the optical properties of Pd-free Au–Pt-based dental alloys

The optical properties of experimental Au-Pt-based alloys containing a small amount of In, Sn, and Zn were investigated by spectrophotometric colorimetry to extract factors affecting color of Au-Pt-based high-karat dental alloys. It was found that the optical properties of Au-Pt-based alloys are strongly affected by the number of valence electrons per atom in an alloy, namely, the electron:atom ratio, e/a. That is, by increasing the e/a-value, activities of reflection in the long-wavelength range and absorption in the short-wavelength range in the visible spectrum apparently increased. As a result, the maximum slope of the spectral reflectance curve at the absorption edge, which is located near 515 nm (approximately 2.4 eV), apparently increased with e/a-value. Due to this effect, the b*-coordinate (yellow-blue) in the CIELAB color space considerably increased and the a*-coordinate (red-green) slightly increased with e/a-value. The addition of a third element with a higher number of valence electrons to the binary Au-Pt alloy is, therefore, effective in giving a gold tinge to the parent Au-Pt alloy. This information may be useful in controlling the color of Au-Pt-based dental alloys.     

Mesoporous activated carbon as electrode for electric double layer capacitor

Mesoporous activated carbon with high surface area (AC-Y-A) was prepared by carbonization followed by activation of vinylidene chloride copolymer containing yttrium acetylacetonate. Their performances as electrodes for electric double layer capacitor (EDLC) in tetraalkylammonium tetrafluoroborate (R₄NBF₄)/propylene carbonate (PC) or acetonitrile (AN) solutions were evaluated and compared with those of microporous activated carbons [AC and AC(CO₂)]. The specific EDLC capacitances of the mesoporous AC-Y-A are almost the same as those of microporous AC at low discharge current. However, at high discharge current, the specific capacitance of AC-Y-A is much higher than those of both AC and AC(CO₂) in PC and AN solutions. The capacitances decreased with increasing alkyl chain length of R₄ N⁺ ions and discharge current. These results suggest that EDLC capacitance depends on pore size of activated carbons and smooth movement of R₄ N⁺ ions in pores.