Overcoming the luddite factor: some behavioural aspects of the field supervisor's role in construction planning

The way data is presented can seriously affect the ease with which it can be understood. The objectives and results of a survey of different types of presentation are given. Some psychological aspects of the problem are analysed.     

Bayesian Availability Using Gamma Distributed Priors

Classical statistical estimation techniques have limited usage in predicting system availability when a system, e.g., a computer or telecommunications system, is highly reliable. A Bayesian solution is suggested in this paper. Gamma priors, which are rich in shapes, are assigned to the scale parameters of a gamma distributed component on-time and off-time. Estimation of the gamma priors follows engineer's past experiences for reliability modeling. Both steady-state and instantaneous availabilities are derived using Bayes Theorem. An illustration highlights the assessment and evaluation of the proposed availability measure.     

Fabrication and properties of PLZT ceramics from spray-dried aqueous solution

PLZT ceramics with the composition of 9/62/38 (La/Zr/Ti) were fabricated from spraydried aqueous solution. Complete crystallization of the spray-dried powder is achieved after 1 hr calcination at 650‡ C as compared to 800‡ C, 1 hr for conventional mixedoxide method. Sintering environment plays an important role in the densification of PLZT ceramics. Densities of the atmosphere sintered samples are much higher than those of normal sintered ones. PLZT ceramics derived from spray-dried powders have properties comparable to those derived from sol-gel ones. The spray-dried method presents a less expensive and more effective approach in the synthesis of PLZT ceramics.     

Design of quasi-elliptic function filters with a dual-passband response

Compact miniaturized hairpin resonators are used to design cross-coupled filters with a dual-passband response of elliptic function type. The hairpin resonators are treated as a stepped impedance resonator (SIR) in analysis. In a filter, two different hairpin resonators are used to establish proper couplings required for the two design frequencies. Two filters are fabricated and measured. The results show a good agreement with the simulation.     

Phase composition and properties of solid solutions of GdFeO3–GdInO3 bulks

Solid solutions of the GdFeO₃–GdInO₃ system were prepared at 1550 °C by ceramic powder processing. The formulated composition was Gd(Fe_1−xIn_x)O₃ (GFI) with the indium contents at x = 0, 0.25, 0.5, 0.75, and 1.0. A stable phase of Gd(Fe_1/3In_2/3)O₃ in our system was identified by X-ray diffraction and phase composition analysis. Multi-phase morphologies were observed for GFI bulks with x = 0.5 and 0.75. Dielectric and electrical properties of the GFI bulks were investigated. The addition of 25% In³⁺ in GdFeO₃ had an obvious enhancement in polarization and led to an elevated resonance frequency. Dielectric properties of GFI bulks except GdInO₃ were strongly dependent upon the test frequency, which corresponded to the response of polarization mechanism. GdInO₃ displayed as a stable dielectric, which was frequency- and temperature-insensitive. GdInO₃ was thermally activated and became leaky until above 600 °C.     

Water bamboo husk reinforced poly(lactic acid) green composites

The water bamboo husk is one of major agricultural wastes in Taiwan. In this study, the powder obtained from the water bamboo husk was added to poly(lactic acid) (PLA) to form novel reinforced biodegradable composites. Morphologies, mechanical properties, and heat resistance of these water bamboo powder reinforced composites were investigated. The results indicate that the char yields were increased as plant powder was incorporated to PLA. In addition, the mechanical properties were also enhanced due to the addition of powders. The increments of storage moduli of PLA were about 50–200%. Moreover, the increments of loss moduli of PLA were about 70–200%. On the other hand, the T_g of PLA was slightly decreased by the addition of powder, and this may improve the brittle characteristics of PLA. Furthermore, this type of reinforced PLA would be more environmental friendly than the artificial additive‐reinforced one. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Serotonin-4 receptor antagonists reverse cocaine-induced cardiac arrhythmia

CONTEXT: Adolescent smoking prevalence is tracked annually and has increased since 1991. In contrast, little is known about trends in smoking among college students, a group that has previously been more resistant to tobacco use than other young adults. OBJECTIVE: To examine changes in cigarette smoking among college students between 1993 and 1997 and among different types of students and colleges. DESIGN: Self-administered survey (Harvard School of Public Health College Alcohol Study). SETTING: One hundred sixteen nationally representative 4-year colleges. SUBJECTS: A total of 15103 randomly selected students in 1993 (70% response rate) and 14251 students in 1997 (60% response rate). MAIN OUTCOME MEASURES: Self-reports of cigarette smoking in the past 30 days and in the past year, age at smoking first cigarette, and number of attempts to quit. RESULTS: Over 4 years, the prevalence of current (30-day) cigarette smoking rose by 27.8%, from 22.3% to 28.5% (P<.001). The increase was observed in 99 of 116 colleges and was statistically significant (P<.05) in 27 (23%) of them. Current smoking increased across all student subgroups (defined by sex, race/ethnicity, and year in school) and in all types of colleges. Smoking is rising faster in public schools (from 22.0% to 29.3%) than in private schools (from 22.9% to 26.8%). Eleven percent of college smokers had their first cigarette and 28% began to smoke regularly at or after age 19 years, by which time most were already in college. Half of current smokers tried to quit in the previous year; 18% had made 5 or more attempts to quit. CONCLUSIONS: Cigarette use is increasing on campuses nationwide in all subgroups and types of colleges. Substantial numbers of college students are both starting to smoke regularly and trying to stop. National efforts to reduce smoking should be extended to college students.     

Closed-form physical model for VLSI bipolar devices consideringenergy transport

A closed-form physical model is reported for VLSI bipolar devices considering energy transport. Based on the model, for a base width of 810 Å, the bipolar device, biased at V_cb=2 V, has a peak electron temperature of over 700 K, which results in a 5% reduction in the collector current     

High-speed Modulation of InGaAs: Sb-GaAs-GaAsP quantum-well vertical-cavity surface-emitting lasers with 1.27-/spl mu/m emission wavelength

1.27-/spl mu/m InGaAs: Sb-GaAs-GaAsP vertical-cavity surface-emitting lasers (VCSELs) were grown by metal-organic chemical vapor deposition and exhibited excellent performance and temperature stability. The threshold current changes from 1.8 to 1.1 mA and the slope efficiency falls less than /spl sim/35% as the temperature raised from room temperature to 70/spl deg/C. With a bias current of only 5 mA, the 3-dB modulation frequency response was measured to be 8.36 GHz, which is appropriate for 10-Gb/s operation. The maximal bandwidth is measured to be 10.7 GHz with modulation current efficiency factor (MCEF) of /spl sim/5.25 GHz/(mA)/sup 1/2/. These VCSELs also demonstrate high-speed modulation up to 10 Gb/s from 25/spl deg/C to 70/spl deg/C.