Analysis of the drude model in metallic films

A method, believed to be new, to simulate Drude parameters for collective oscillation of the free carriers in metallic films is proposed. Plasma resonance frequency and relaxation were simulated simultaneously from both the real and the imaginary parts of the dielectric function of a metallic film after consideration of their correlation in the Drude model. As examples, the contributions of the electrons in Ag films and of the free carriers in metallic silicide, NbSi(2) and TaSi(2), films have been studied.     

Effect of selective laser melting on microstructure and properties of AZ91D alloy

Selective laser melting technology is used to manufacture porous and solid AZ91D alloys. The effects of laser power and hatch spacing on the density, blowholes, microstructure and mechanical properties of AZ91D alloy are studied. The laser power and hatch spacing play a significant role in the density and blowholes of AZ91D specimens. The grains size of specimens increases from 1 μm–2 μm to 8 μm–10 μm from the bottom to the top in single molten pool. Compared with grain size of die‐casting alloy (30 μm), that of selective laser melted gets refinement. There is no significant change in microstructure in the bottom, middle and top of specimens. The micro‐hardness of AZ91D alloy, reaching up to 115.3 HV 0.1, is superior to that of die‐casting alloy (56 HV 0.1). The compression properties of porous and solid specimens reach the degree of die‐casting solid magnesium alloy. AZ91D alloy shows the potential in the application of medical biodegradable materials.     

Rotor resonances of high-speed permanent-magnet brushless machines

For high-speed machines, in particular, it is very important to accurately predict natural frequencies of the rotor at the design stage so as to minimize the likelihood of failure. Finite-element analysis and experimental measurements are used to establish the natural frequencies and modes of the rotor of a high-speed permanent-magnet brushless motor, and to assess the influence of leading design parameters, such as the active length, the shaft diameter and extension, the bearings, and the material properties.     

Continuous full-field representation and differentiation of three-dimensional experimental vector data

A new numerical method is presented for representing and differentiating experimental data. It combines a smoothing technique with finite-element concepts. Discrete experimental vector data having up to at least three independent components can be processed to directly obtain smooth values of the vector function and its derivatives. Each of these vectors may contain several components. The isoparametric elements used have curve boundaries and can consequently fit an arbitrary geometry using only a few elements. As neither equilibrium nor any constitutive relationship is assumed, the concept has general applicability. The method is easy and expedient to use, and the illustrated results demonstrate its accuracy.     

An integrated research tool for X-ray imaging simulation

This paper presents a software simulation package of the entire X-ray projection radiography process including beam generation, absorber structure and composition, irradiation set up, radiation transport through the absorbing medium, image formation and dose calculation. Phantoms are created as composite objects from geometrical or voxelized primitives and can be subjected to simulated irradiation process. The acquired projection images represent the two-dimensional spatial distribution of the energy absorbed in the detector and are formed at any geometry, taking into account energy spectrum, beam geometry and detector response. This software tool is the evolution of a previously presented system, with new functionalities, user interface and an expanded range of applications. This has been achieved mainly by the use of combinatorial geometry for phantom design and the implementation of a Monte Carlo code for the simulation of the radiation interaction at the absorber and the detector.     

Low linolenate and commercial soybean oils diminish serum HDL cholesterol in young free-living adult females

OBJECTIVE: A mutant soybean line (A16) low in linolenic acid content (2% of oil by weight) was developed to increase oil oxidative stability. It was unknown whether serum lipid and lipoprotein concentrations in humans would be affected should A16 soybean oil (A16 oil) replace commercial soybean oil in diets. This study was conducted to examine the hypothesis that in free-living normolipidemic women, the consumption of A16 oil at approximately 10% of energy intake (en%) would not affect serum lipids and lipoproteins differently than would the consumption of the same amount of a commercial soybean oil with 7% of linolenic acid content. DESIGN: Fifteen free-living female college students consumed the soybean oil daily with regular meals for 9 weeks in different orders, with each test oil being eaten for 3 weeks. During the study, 13 en% was provided by each test oil and a total of 35 en% was from dietary fat. Serum concentrations of total cholesterol, high-density lipoprotein cholesterol (HDL cholesterol), low-density lipoprotein cholesterol (LDL cholesterol) and triacylglycerides (TAG) were measured. Serum total fatty acid patterns were analyzed as well. RESULTS: Each of the three test oils decreased serum total cholesterol, LDL cholesterol and TAG concentrations from the baseline values. The feeding of A16 and commercial soybean oils decreased serum HDL cholesterol significantly compared with coconut oil (p < 0.05). Dietary inclusion of coconut oil increased serum myristic acid significantly more than did either soybean oil (p < 0.01). Serum arachidonic acid concentrations were significantly greater with A16 consumption than with commercial soybean oil consumption (p < 0.001). CONCLUSION: A16 and commercial soybean oils both diminished serum HDL cholesterol. Although the fatty acid composition differed between the two soybean oils, A16 oil and commercial oil had similar effects on serum concentrations of lipoproteins and lipids. With increased oxidative stability, A16 oil is a good alternative to commercial soybean oil.     

Research methods for profile analysis: Introduction to the special issue.

The five articles that make up the bulk of this special issue collectively illustrate new methods for examining the utility of sub-test and scale-level profile analysis. By necessity they are preliminary, but they illustrate methods that may indeed prove useful and may help resolve this divide between research and practice. This special issue grew out of a symposium conceived and organized by Cecil Reynolds at the American Psychological Association in 1998. The articles and one of the commentaries in this special issue are extensions of that symposium. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparison of conventional and soft computing-based power control methods in mobile communications systems

 In this paper, we give a comparison between the conventional power control scheme and soft computing-based approaches in a mobile communications application. At the base station, the `bang–bang' control strategy and a neural network-based prediction control method are employed. In addition, full power command transmission mode, single-bit command transmission mode, and fuzzy logic-based power command enhancement unit are considered. Based on simulation experiments, we quantitatively evaluate the performance of various combinations of these control methods and command transmission modes. Conclusions on the optimal configuration are finally drawn.     

Adaptive switching mean filter using conditional morphological noise detector

The adaptive switching mean (ASM) filter is proposed to remove impulse noise. The filter first identifies the corrupted pixels using conditional morphological noise detection and then removes the detected impulses using the adaptive mean filter. Simulation results indicate that the ASM filter can suppress impulse noise effectively while preserving the details in the image very well, thus providing better restoration performance than many other switching-based filters.