Synthesis and characterization of a positive‐working,aqueous‐base‐developable photosensitive polyimide precursor

A positive‐working, aqueous‐base‐developable photosensitive polyimide precursor based on poly(amic ester)‐bearing phenolic hydroxyl groups and a diazonaphthoquinone photosensitive compound was developed. The poly(amic ester) was prepared from a direct polymerization of 2,2′‐bis‐(3‐amino‐4‐hydroxyphenyl)hexafluoropropane and bis(n‐butyl)ester of pyromellitic acid in the presence of phenylphosphonic dichloride as an activator. Subsequently, the thermal imidization of the poly(amic ester) precursor at 300°C produced the corresponding polyimide. The inherent viscosity of the precursor polymer was 0.23 dL/g. The cyclized polyimide showed a glass‐transition temperature at 356°C and a 5% weight loss at 474°C in nitrogen. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared spectroscopy and ¹H‐NMR. The photosensitive polyimide precursor containing 25 wt % diazonaphthoquinone photoactive compound showed a sensitivity of 150 mJ/cm² and a contrast of 1.65 in a 3 μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 10 μm was obtained from this composition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 352–358, 2002     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

Editorial

Intelligent Service Robotics -     

Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

Simulations of the dielectric constant of bonding materials and field emission properties of CNT cathodes

The effect of the dielectric constant (k) of bonding materials in a screen-printed carbon nanotube (CNT) cathode on the field enhancement factor was investigated for high-efficiency CNT cathodes using the ANSYS software. The values obtained by a simulation study were compared to the experimental results obtained for screen-printed CNT cathodes. The field enhancement factor increased as the dielectric constant decreased, reaching a maximum value at a dielectric constant of 1, the value for a vacuum. The findings indicate that the larger sheet resistance of the bonding materials, after the firing process, can be attributed to the larger emission current of the CNT cathode. From these results, it was concluded that the best bonding materials for screen-printed CNT cathodes should have a low dielectric constant and a high sheet resistance. This finding can be used as criteria for selecting bonding materials for use in CNT pastes for highly efficient CNT cathodes.     

Examination of wire electrical discharge machining of Al2O3p/6061Al composites

Alumina particle reinforced 6061 aluminum matrix composites (Al₂O₃p/6061Al) have excellent physical and chemical properties than those of a traditional metal; however, their poor machinability lead to worse surface quality and serious cutting tool wear. In this study, wire electrical discharge machining (WEDM) is adopted in machining Al₂O₃p/6061Al composite. In the experiments, machining parameters of pulse-on time were changed to explore their effects on machining performance, including the cutting speed, the width of slit and surface roughness. Moreover, the wire electrode is easily broken during the machining Al₂O₃p/6061Al composite, so this work comprehensively investigates into the locations of the broken wire and the reason of wire breaking.The experimental results indicate that the cutting speed (material removal rate), the surface roughness and the width of the slit of cutting test material significantly depend on volume fraction of reinforcement (Al₂O₃ particles). Furthermore, bands on the machined surface for cutting 20 vol.% Al₂O₃p/6061Al composite are easily formed, basically due to some embedded reinforcing Al₂O₃ particles on the surface of 6061 aluminum matrix, interrupt the machining process. Test results reveal that in machining Al₂O₃p/6061Al composites a very low wire tension, a high flushing rate and a high wire speed are required to prevent wire breakage; an appropriate servo voltage, a short pulse-on time, and a short pulse-off time, which are normally associated with a high cutting speed, have little effect on the surface roughness.     

Adoption of travel information in user-generated content on social media: the moderating effect of social presence

Travel patterns have gradually changed from group travel to individual travel. An increasing number of people acquire travel information through various types of media. One of the alternative information sources is social media, which enables users to exchange information among members. However, one of the characteristics of social media is information sharing, not information search, which involves both giving (i.e. posting) and taking (i.e. selective reading, forwarding, replying, linking, and liking) information. Compared to the ‘giving’ side of information-sharing research, less effort has been spent on the ‘taking’ side of information research. Therefore, we investigate travel information adoption in social media as well as how individuals communicate with each other. We use the elaboration likelihood model, which measures the impact of central (e.g. argument quality) and peripheral (e.g. credibility) cues on traveller information-sharing behaviour corresponding with social presence on social media. The results of an empirical analysis of 527 respondents, who were experienced in travel information adoption via social media, were examined. Our findings revealed that argument quality had a positive effect on perceived usefulness and source credibility positively affected perceived usefulness and social relationships. Perceived usefulness had a significant positive effect on social relationships. Both perceived usefulness and social relationships affected travel information adoption. Lastly, the levels of argument quality and source credibility perceived by social media members were found to differ according to the level of social presence.